FORTIN 2015 Nissan Sentra Push Button Remote Starters & Alarm Systems User Guide

FORTIN 2015 Nissan Sentra Push Button Remote Starters & Alarm Systems

Product Information

• Product Name: Push-to-Start Vehicle Remote Starter

• Compatible Vehicles: Nissan Sentra (2013-2019)

• Firmware Version: 72.[48]

• Minimum Nissan/Infiniti Bypass Firmware
  Version: 31, 32, 38

• Required Tools: FLASH LINK UPDATER or FLASH LINK MOBILE (sold separately)

• Installation Requirement: Qualified technician installation recommended

• Mandatory Installation: Hood pin switch must be installed if the vehicle can be remote started with the hood open

• Security Sticker: Included – Must be installed by a qualified technician to avoid permanent damage to the vehicle

Product Usage Instructions

1. Program Remote Starter Option:
   • (+) Parking Light (E1): Enable Press 3x Lock to remote start with the OEM remote.
   • (+) Accessory (E2): Enable Press 3x Lock to remote start with the OEM remote.
2. Program Bypass Option:
   • C1: Push-to-Start
   • D6: Hood trigger (Output Status) – still operable during remote start
   • A11: Set to OFF if the vehicle can be remote started with the hood open
3. Connection Instructions:
   • BCM (+) Parking Lights: Connect at Immobilizer connector
   • (-) Door Pin, (-) Unlock, (-) Lock: Connect at Top connector or Push-to-Start button
   • (+) Ignition: Connect at brake switch or Push-to-Start button
   • (~) RX, (~) TX, OBDII, (+) 12V, (+) Brake: Connect at appropriate connectors according to color codes provided
4. Cut Loop for Automatic Transmission Mode: Cut the specified loop for automatic transmission mode

| Vehicle functions supported in this diagram (functional if equipped)
---|---

| Immobilizer bypass Contournement d’immobilisateur| T-Harness available (sold separately)

Harnais en T disponible

(vendu séparément)

| Lock| Unlock| Arm| Disarm| Trunk Release| RAP Disable| Parking Light| Tachometer| Door Status| Trunk Status| Hood Status*| Hand-Brake Status| Foot- Brake Status| Push-to-Start Control| OEM Remote monitoring| R.S. OEM remote Stand Alone compatible
NISSAN
Sentra                            Push-to-Start 2013-2019| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •

NOTES

The vehicles OEM remote and SmartKey are still operable during remote start.

MANDATORY INSTALL

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

SECURITY STICKER

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

MANUAL TRANSMISSION WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/2

Remove the valet key from the back of the OEM remote.
Remove the battery from the OEM remote.
Keep the other OEM remotes at least 3 meters (10 feet) away from the vehicle to proceed.

• Press and hold the programming button:
  Connect the 6-PIN Main harness (White connector).
  The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

• Release the programming button when the LED is YELLOW.
  If the LED is not solid YELLOW disconnect the 6-Pin connector (Main-Harness) and go back to step 1.

• Insert the required remaining  connectors.

• Press and release the programming button three (3x) times.
  The YELLOW LED will flash 3 times each second.
  WAIT for the YELLOW LED to tum ON solide

• Place the OEM remote (no battery) close to the front of START/STOP button exactly as shown.
  Transponder is located behind the logo. If the RED LED flash rapidly, wait until the LED turns OFF.

• Press the START/STOP button twice to turn ON the ignition.
  The BLUE LED will Flash rapidly.
  The RED LED will turns OFF.

• Press the START/STOP button once to turn OFF the ignition.
  L+Wait until the BLUE LED flash slowly.
  

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

1-877-336-7797

www.fortinbypass.com

References

• Remote Car Starters, Car Alarms, Immobilizer Bypass and Connected Vehicle Solutions | Fortin Electronic Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>