MARK-10 TS Series Force Measurement Test Stand User Guide

MARK-10 TS Series Force Measurement Test Stand

Product Information

The Mark-10 Series TS Force Measurement Test Stand is a versatile tool that can be used in compression and tension testing applications. It is designed for smooth mechanical functioning and long-lasting service. The test stand comes with various models, including TSA750, TSA750H, TSB100, TSC1000, and TSC1000H.

Features:

• Can be used for compression and tension testing
• Smooth mechanical functioning
• Avoid repetitive overloads and shock loads for optimal performance
• Comes with a user’s guide for comprehensive operation explanation and specifications
• Includes necessary items for setup, such as thumb screws, mounting hole drill template, tool kit, attachment kit, and force gauge plate

Models:

• TSA750/TSA750H: Suitable for compression and tension testing
• TSB100: Specifically designed for compression testing
• TSC1000/TSC1000H: Suitable for compression and tension testing

Product Usage Instructions

Unpacking and Setting Up:

1. Mount the test stand on a firm, flat, and level working surface using four 5/16 screws (not included).
2. For accurate drilling of holes, use the included mounting hole drill template.
3. If necessary, secure the test stand by drilling and mounting it to ensure maximum safety and accuracy.

Installing Force Gauge:

1. Attach a force gauge onto the gauge plate using four thumb screws.
2. Note: Mark-10 force gauges can be directly mounted to the stand without adapters.

Installing Attachments:

1. If required, install any needed attachments, such as grips, adapters, or other materials for your specific test sample.
2. Ensure that the attachments are securely and safely set up.

Operating the Test Stand:

1. Zero out the force gauge before starting the test.
2. To begin the test, turn the handwheel clockwise for compression or counter-clockwise for tension.

Adjusting Loading Lever:
The loading lever can be adjusted for ease of operation.

1. Remove the knob from the loading lever.
2. Realign the lever pin in the mounting hub to reposition the loading lever.
3. Move the loading lever clockwise for compression and counter-clockwise for tension.

Setting Rack Brake:

1. Loosen the wing nut.
2. Position the rack to the desired location.
3. Tighten the wing nut to set the rack brake.

If you have any further questions or concerns, please reach out to our technical support and engineering teams for assistance. Happy testing!

Thank you!

• Thank you for purchasing a Mark-10 Series TS Force Measurement Test Stand. We are confident that you will get many years of service from this product.
• Series TS Force Measurement Test Stands can be used in any number of compression and tension testing applications. To maintain the smooth mechanical functioning of your test stand, avoid repetitive overloads and shock loads.
• We hope that this User’s Guide will provide a comprehensive explanation of the test stand’s operation and sufficient detail on its specifications. However, if you have any questions or concerns our technical support and engineering teams will be eager to help you.

Thank you again for your purchase and happy testing!

UNPACKING AND SETTING UP

1. Carefully unpack the stand and inspect for any damage. Check to make sure that you have received a complete test stand with all accessories – see the “List of included items” section below.
2. Install the loading lever on Models TSA750, TSA750H and TSB100. The position of the loading lever can be adjusted as required – see the “Operation” section for your particular model. No assembly is required for Models TSC1000 and TSC1000H.
3. Place the stand on a firm, flat, and level working surface free from vibration to ensure accurate readings. It is recommended that the test stand be secured to a workbench – see the “Operation” section for your particular model.

LIST OF INCLUDED ITEMS

diameter compression plate

OPERATION, SPECIFICATIONS, AND DIMENSIONS

TSA750 / TSA750H

1. Mount the test stand to a firm, flat, and level working surface for maximum safety and accuracy using four 5/16 screws (not included). Use the included mounting hole drill template to accurately drill the holes. Testing can take place without securing the test stand in such a manner, however, it is strongly recommended that the stand be secured, especially for large forces.
2. Install a force gauge onto the gauge plate with four thumb screws. Mark-10 force gauges mount directly to the stand without adapters.
3. Install any needed attachments, including grips, adapters, and other materials necessary for your test sample. Make sure these items are set up in a secure and safe manner.
4. Zero out the force gauge, then begin the test by turning the handwheel clockwise for compression or counter-clockwise for tension.
   • The loading lever can be adjusted to allow for ease of operation. Reposition the loading lever by removing the knob and realigning the lever pin in the mounting hub. Move the loading lever clockwise for compression, and counter-clockwise for tension.
   • The rack brake can be set by loosening the wing nut, positioning the rack to the desired location, and re-tightening the wing nut.
   • The clearance on the rack can be set by adjusting the four set screws using the tools provided.
   • The travel stops can be adjusted in 0.5” [12.7 mm] increments along the rack by moving the blocks to the desired location and tightening two screws. Fine adjustments can be made using adjusting the screws on the housing and locking the jam nuts.

Note: To maintain the smooth functioning of the stand, avoid overloads and repetitive shock loads.

Optional Equipment

Digital Travel Display Kit – for accurate position indication
This position indicator covers 6” of travel per setting with a 5-digit display (0.0005” resolution) and a computer interface for automated data collection. It may be easily installed by the user.

DIMENSIONS

in [mm]

TSA750

TSA750H

SPECIFICATIONS

TSB100

1. Mount the test stand to a firm, flat, and level working surface for maximum safety and accuracy using four 5/16 screws (not included). Use the included mounting hole drill template to accurately drill the holes. Testing can take place without securing the test stand in such a manner, however, it is recommended that the stand be secured.
2. Install a force gauge onto the gauge plate with four thumb screws. Mark-10 force gauges mount directly to the stand without adapters.
3. Install any needed attachments, including grips, adapters, and other materials necessary for your test sample. Make sure these items are set up in a secure and safe manner.
4. Zero out the force gauge, then begin the test by turning the hand wheel clockwise for compression or counter-clockwise for tension.

• The loading lever can be adjusted to allow for ease of operation. Reposition the loading lever by removing the knob and realigning the lever pin in the mounting hub. Move the loading lever clockwise for compression, and counter-clockwise for tension.
• The rack brake can be set by loosening the wing nut, positioning the rack to the desired location, and re-tightening the wing nut.
• The clearance on the rack can be adjusted by removing the gauge plate, aligning the C-bracket holes with the set screws, and adjusting as necessary.
• Note: To maintain smooth functioning of the stand, avoid overloads and repetitive shock loads.

Optional Equipment

Digital Travel Display Kit – for accurate position indication
This position indicator covers 6” of travel per setting with a 5-digit display (0.0005” resolution) and a computer interface for automated data collection. It may be easily installed by the user.

DIMENSIONS
in [mm]

SPECIFICATIONS

3” [76.2 mm] per rev.

Weight (test stand, only)| 12 lb [5.4 kg]
Optional digital travel display resolution| 0.0005“ [0.01 mm]

TSC1000/TSC1000H

1. Mount the test stand to a firm, flat, and level working surface for maximum safety and accuracy using four 5/16 screws (not included). Use the included mounting hole drill template to accurately drill the holes (TSC1000, only). Testing can take place without securing the test stand in such a manner, however, it is strongly recommended that the stand be secured, especially for large forces.
2. Install a force gauge onto the gauge plate with four thumb screws. Mark-10 force gauges mount directly to the stand without adapters.
3. Install any needed attachments, including grips, adapters, and other materials necessary for your test sample. Make sure these items are set up in a secure and safe manner.
4. Zero out the force gauge, then begin the test by turning the hand wheel clockwise for compression or counter-clockwise for tension.

Note:
To maintain the smooth functioning of the stand, avoid overloads and repetitive shock loads.

Optional Equipment

Digital Travel Display Kit – for accurate position indication
This position indicator covers 6” of travel per setting with a 5-digit display (0.0005” resolution) and a computer interface for automated data collection. It may be easily installed by the user.

SPECIFICATIONS

0.1” [2.54 mm] per rev.

Weight (test stand, only)| TSC1000: 25 lb [9.0 kg],

TSC1000H: 20 lb [11.3 kg]

Digital travel display (optional)| Resolution: 0.0005” [0.01 mm]

DIMENSIONS
in [mm]

TSC1000

TSC1000H

OTHER MARK-10 PRODUCTS

A full line of force and torque measurement products and related items, including force gauges, torque gauges, force and torque test stands, sensors, grips, software, and more.

WARRANTY

Mark-10 Corporation expressly warrants to its buyer for three (3) years from the date of delivery that the goods sold are free from defects in workmanship and materials. Mark-10 Corporation will, at its option, repair or replace or refund the purchase price of goods found to be defective. This remedy shall be the buyer’s sole and exclusive remedy. Any modification, abuse, exposure to corrosive environment or use other than intended will void this warranty. This warranty is in lieu of all other warranties, including implied warranties of merchantability and fitness for an intended purpose. In no event shall Mark-10 Corporation be liable for any incidental and consequential damages in connection with goods sold or any part thereof?

Mark-10 Corporation has been an innovator in the Force and Torque measurement fields since 1979. We strive to achieve 100% customer satisfaction through excellence in product design, manufacturing and customer support. In addition to our standard line of products, we can provide modifications and custom designs for OEM applications. Our engineering team is eager to satisfy any special requirements. Please contact us for further information or suggestions for improvement.

We make a measurable difference in force and torque measurement

Mark-10 Corporation

• 11 Dixon Avenue Copiague, NY 11726 USA
• 1-888-MARK-TEN
• Tel: 631-842-9200
• Fax: 631-842-9201
• Internet: www.mark-10.com.
• Email: info@mark-10.com.

References

• Mark-10 Force and Torque Measurement

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>