MARK-10 M3-012 Series 3 Digital Force Gauges User Guide
- June 4, 2024
- MARK-10
Table of Contents
MARK-10 M3-012 Series 3 Digital Force Gauges
Thank you for purchasing a Mark-10 Series 3 Digital Force Gauge. We are confident that you will get many years of service from this product. Series 3 gauges may be used in a variety of compression and tension testing applications. Please read through this Quick Start Guide and the complete User’s Guide before using the gauge
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please review the yellow safety information card included in the box, as well as the safety information provided in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS
| Part No.|
---|---|---
Qty.| M3-012 – M3-20| M3-50 – M3-100| M3-200 – M3-500|
Description
1| 12-1049| 12-1049| 12-1049| Carrying Case
1
| AC1030 / AC1031 / AC1032/ AC1035| AC1030 / AC1031 / AC1032/ AC1035| AC1030 / AC1031 / AC1032 / AC1035| ****
AC adapter/charger w/US, EU, UK, or AUS prong
1| 08-1026| 08-1026| 08-1026| Rechargeable NiMH Battery (inside gauge)
1| G1024| G1024| G1031| Extension rod
1| G1026| G1026| G1033| Cone
1| G1025| G1025| G1032| Chisel
1| G1027| G1027| G1034| V-groove
1| G1029| G1029| G1036| Flat
1| G1028| G1038| G1035| Hook
1| N/A| G1039| G1037| Coupling
1| 09-1165| 09-1165| 09-1165| USB cable
POWER
Press the button to power on the gauge. Press and hold to power off. The gauge may be powered either by the internal rechargeable battery or an AC adapter/charger. The battery will last approximately 7 hours with the backlight turned on, and 24 hours with the backlight turned off before recharging is necessary.
LITERATURE & SOFTWARE DOWNLOADS
Download at: www.mark-10.com/downloads
-
User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product and read it thoroughly before use. -
USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter. Required for communication with a PC. Follow the installation instructions provided in the user’s guide. -
MESUR ® family of software – see below.
INSTALLING MESUR® SOFTWARE
Mark-10 offers three data collection applications:
MESUR® Lite
Free basic data acquisition application, for data tabulation and exporting to
Excel. Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-configurable
start and stop triggers and other tools. Compatible with gauges and test
stands for load vs. time or load vs. travel. MESUR®gauge Plus adds test stand
motion control coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
Force and torque measurement engineered better
Mark-10 Corporation
11 Dixon Avenue Copiague, NY 11726 888-MARK-TEN
- Tel : 631-842-9200
- Fax : 631-842-9201
- Internet : www.mark-10.com
- E-mail : info@mark-10.com