MARK-10 Series 5 Digital Force Gauges User Guide
- June 4, 2024
- MARK-10
Table of Contents
MARK-10 Series 5 Digital Force Gauges
Thank you!
Thank you for purchasing a Mark-10 Series 5 Digital Force
Gauge. We are confident that you will get many years of service from this
product. Series 5 gauges may be used in a variety of compression and tension
testing applications. Please read
through this Quick Start Guide and the complete User’s Guide before using the
gauge
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please review the yellow safety information card included in the box, as well as the safety information in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
| Part No.|
---|---|---
Qty.| M5-012 – M5-20| M5-50 – M5-100| M5-200 – M5-500|
M5-1000| M5-2000| Description
1| 12-1049| 12-1049| 12-1049| 12-1049| 12-1049| Carrying case
1
| AC1030 / AC1031 / AC1032 / AC1035| AC1030 / AC1031 / AC1032 / AC1035| AC1030 / AC1031 / AC1032 / AC1035| AC1030 / AC1031 / AC1032 / AC1035| AC1030 / AC1031 / AC1032 / AC1035| AC adapter w/US, EU, UK, or AUS
prong
1
|
08-1026
|
08-1026
|
08-1026
|
08-1026
|
08-1026
| Rechargeable NiMH battery (inside gauge)
1| G1024| G1024| G1031| G1031| G1031| Extension rod
1| G1026| G1026| G1033| G1033| G1033| Cone
1| G1025| G1025| G1032| G1032| G1032| Chisel
1| G1027| G1027| G1034| G1034| G1034| V-groove
1| G1029| G1029| G1036| G1036| G1036| Flat
1| G1028| G1038| G1035| G1035| –| Hook
1| –| G1039| G1037| –| –| Coupling
1| –| –| –| G1041| G1041| Thread adapter
1| –| –| –| –| –| Certificate of
calibration
1| 09-1165| 09-1165| 09-1165| 09-1165| 09-1165| USB cable
POWER
Press the button to power on the gauge. Press and hold to power off. The
gauge may be powered either by the internal rechargeable battery or an AC
adapter/charger. The battery will last approximately 7 hours with the
backlight turned on, and 24 hours with the backlight turned off before
recharging is necessary.
LITERATURE & SOFTWARE DOWNLOADS
Download at: www.mark-10.com/downloads
-
User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product and read it thoroughly before use. -
USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter. Required for communication with a PC. Follow the installation instructions provided in the user’s guide. -
MESUR® family of software – see below.
INSTALLING MESUR® SOFTWARE
Mark-10 offers three data collection applications:
MESUR® Lite
Free basic data acquisition application, for data tabulation and exporting to
Excel. Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-configurable
start and stop triggers and other tools. Compatible with gauges and test
stands for load vs. time or load vs. travel. MESUR®gauge Plus adds test stand
motion control coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>