MARK-10 E Series ME-100 Ergonomics Force Gauges User Guide
- June 4, 2024
- MARK-10
Table of Contents
Series E
ERGONOMICS FORCE GAUGES
Quick Start Guide
Thank you!
Thank you for purchasing a Mark-10 Series E Digital Force Gauge and
accessories. We are confident that you will get many years of service from
this product. Series E gauges may be used in a variety of push and pull
testing application. Please read through this Quick Start Guide and the
complete User’s Guide before using the gauge.
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please review the yellow safety information card included in the box, as well as the safety information in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
| Qty. | Part No. | Description |
|---|---|---|
| 1 | 12-1049 | Carrying case |
| 1 | AC1030 / AC1031 / AC1032 / AC1035 | AC adapter w/US, EU, UK, or AUS prong |
| 1 | 08-1026 | Rechargeable NiMH battery (inside gauge) |
| 1 | – | Certificate of calibration |
| 1 | 09-1165 | USB cable |
OPTIONAL ITEMS:
A number of attachments are available, as pictured below. They may be purchased individually or as kits.
POWER
Press the button to power on the gauge. Press and hold to power off. The gauge may be powered either by the internal rechargeable battery or an AC adapter/charger. The battery will last approximately 7 hours with the backlight turned on, and 24 hours with the backlight turned off before recharging is necessary.
INSTALLING ATTACHMENTS
Attachments are mounted to the gauge’s receptacle via the Click-LockTM mechanism. Line up the attachment with the receptacle, and press in until a click occurs. The attachment may be inserted in 90- or 180-degree orientations. To release the attachment, pull back on the lever in the rear of the housing, as shown at left.
LITERATURE & SOFTWARE DOWNLOADS
Download at: www.mark-10.com/downloads
-
User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product and read it thoroughly before use. -
USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter. Required for communication with a PC. Follow the installation instructions provided in the user’s guide. -
MESUR® family of software - see below.
INSTALLING MESUR® SOFTWARE
Mark-10 offers three data collection applications:
MESUR® Lite
Free basic data acquisition application, for data tabulation and exporting to
Excel. Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-configurable
start and stop triggers and other tools. Compatible with gauges and test
stands for load vs. time or load vs. travel. MESUR®gauge Plus adds test stand
motion control coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
OTHER MARK-10 PRODUCTS
A full line of force and torque measurement products and related items, including force gauges, torque gauges, force and torque test stands, sensors, grips, software, and more.
Force and torque measurement engineered better
Mark-10 Corporation
11 Dixon Avenue Copiague, NY 11726
888-MARK-TEN
Tel: 631-842-9200
Fax: 631-842-9201
www.mark-10.com
info@mark-10.com
32-1213 121119
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>