MARK-10 ME-100 E Series Advanced Ergonomics Kits User Guide

June 4, 2024
MARK-10

MARK-10 ME-100 E Series Advanced Ergonomics Kits

Thank you!
Thank you for purchasing a Mark-10 Series, E Ergonomics Kit. Please read through this Quick Start Guide and the complete force gauge User’s Guide before using this kit.

IMPORTANT SAFETY CONSIDERATIONS

Force gauges are sensitive instruments that must be treated with care. Please review the yellow safety information card included in the box, as well as the safety information provided in the User’s Guide prior to operating the gauge.

LIST OF INCLUDED ITEMS

Qty.| Part No.| Description| EKE (Advanced Kit)| EKE (Professional Kit)
---|---|---|---|---
-100-1| -200-1| -500-1| -100-2| -200-2| -500-2
1| ME-100| Ergonomics force gauge, 100 lbF| | –| –| | –| –
1| ME-200| Ergonomics force gauge, 200 lbF| –| | –| –| | –
1| ME-500| Ergonomics force gauge, 500 lbF| –| –| | –| –|
1| 08-1022| AC adapter body with US, EU,

UK, or AUS prong

|
1| 08-1026| Battery (inside the gauge)|
1| 09-1165| USB cable|
4| 10-1023| Thumb screw, #6-32|
1| E1002| Padded attachment, square| –|
1| E1003| Padded attachment, rectangular|
1| E1004| Padded attachment, curved|
1| E1005| Padded attachment, circular| –|
1| E1006| Snap Hook|
1| E1007| Chain / hook assembly| –|
1| E1008| Single handle grip| –|
1| E1009| Double handle grip|
1| E1010| Pistol grip| –|
1| E1000| Carrying case, small| | –
1| E1001| Carrying case, large| –|

INSTALLING ACCESSORIES

Double and Single Handles

Attach the force gauge to the double handle grip (AC1003) or single handle grip (AC1003-1) by mating the male dowel pin in the cradle to the corresponding hole in the rear of the force gauge housing. Then, fasten the gauge to the cradle with four included thumb screws (10-1023), as shown at left.

Attachments

Ergonomics attachments (E1002 – E1010) are mounted to the gauge’s receptacle via the Click-Lock® mechanism. Line up the attachment with the receptacle and press until a click occurs. The attachment may be inserted in 90° or 180° orientations as shown below. To release the attachment, pull back on the lever in the rear of the housing, as shown below:

MARK-10-ME-100-E-Series-Advanced-Ergonomics-Kits-FIG-4

POWER

Press the button to power on the gauge. Press and hold to power off. The gauge is powered either by the internal rechargeable battery or an AC adapter/charger. The battery will last approximately 7 hours with the backlight turned on, and 24 hours with the backlight turned off before recharging is necessary.

INSTALLING MESUR® SOFTWARE

MESUR® Lite

Free basic data acquisition application, for data tabulation and exporting to Excel.

MESUR®gauge

Data tabulation, graphing, analysis, and reporting, with user-configurable start and stop triggers and other tools. Compatible with all Mark-10 instruments. Free 90-day evaluation.

USB driver

For Mark-10 instruments and the model RSU100 RS-232 to USB converter. Required for communication with a PC. Follow the installation instructions provided in the user’s guide.

LITERATURE & SOFTWARE DOWNLOADS

User’s Guide

Download user’s guides, data sheets, software, solid models, and more.

Mark-10 Corporation

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals