MARK-10 TT02 Series Torque Tool Testers User Guide
- June 4, 2024
- MARK-10
Table of Contents
TT02 Series Torque Tool Testers
User Guide
OTHER MARK-10 PRODUCTS
A full line of force and torque measurement products and related items,
including force gauges, torque gauges, force, and torque test stands, sensors,
grips, software, and more.
Force and
torque measurements engineered better
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: 631-842-9200
Fax: 631-842-9201
Internet: www.mark-10.com
E-mail: [email protected]
Thank you!
Thank you for purchasing a Mark-10 Series TT02 Torque Tool Tester. We are
confident that you will get many years of service from this product. Please
read through this Quick Start Guide and the complete User’s Guide before using
the tester.
IMPORTANT SAFETY CONSIDERATIONS
Force and torque measuring instruments are sensitive and must be treated with
care. Please review the safety information provided in the User’s Guide prior
to operating the indicator.
LIST OF INCLUDED ITEMS:
| Qty. | Part No. | Description |
|---|---|---|
| 1 | MTT02-12 /MTT02-25 /MTT02-50 /MTT02-100 | Series TT02 digital torque tool |
tester
1| 08-1026| NiMH battery (inside the instrument)
1| –| Certificate of calibration
1| 09-1165| USB cable
1| ST001| Bench mounting kit (optional)
1| ST002| Carrying case (optional)
1| AC1066-1| Rundown fixture (optional)
1| AC1066-2| Rundown fixture (optional)
POWER
To power on the tester, press the button. Press and hold to power off. The tester may be powered either by the internal rechargeable battery or an AC adapter/charger. The battery will last approximately 7 hours with the backlight turned on, and 24 hours with the backlight turned off before recharging is necessary
LITERATURE & SOFTWARE DOWNLOADS
Download at:www.mark-10.com/downloads
-
User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product and read it thoroughly before use. -
USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions
provided in the user’s guide. -
MESUR® family of software – see below.
INSTALLING MESUR® SOFTWARE
Mark-10 offers three data collection applications:
MESUR® Lite
Free basic data acquisition application, for data tabulation and exporting to
Excel.
Compatible with gauges only, not test stands.
MESUR® gauge / MESUR® gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-configurable
start and stop triggers and other tools. Compatible with gauges and test
stands for load vs. time or load vs. travel. MESUR® gauge Plus adds test stand
motion control coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. The minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.