Glossary Of Symbols for Omron Devices
- June 8, 2024
- Omron
Table of Contents
The following is a glossary of labeling symbols on Omron devices. For symbols on the Omron blood pressure device, please review the Omron blood pressure monitor manual.
Symbol| | Standard No. / Standard Title| Standard Reference No. / Symbol
Title| Symbol Meaning
---|---|---|---|---
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.1.1 / Manufacturer|
Indicates the medical device manufacturer
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.1.2 / Authorized
representative in the European Community| Indicates the authorized
representative in the European union. Symbol is accompanied by the name and
address of the authorized representative adjacent to the symbol
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.1.3 / Date of Manufacture|
Indicates the date when the medical device was manufactured
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.1.4 / Use-by-date|
Indicates the date after which the medical device is not to be used
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.1.5 / Batch code|
Indicates the manufacturer’s batch code or lot can be identified
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.1.6 / Catalogue number|
Indicates the manufacturer’s catalogue number so the medical device can be
identified
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.1.7 / Serial number|
Indicates the manufacturer’s serial number so that a specific medical device
can be identified
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.2.8 / Do not use if
package is damaged| Indicates a medical device that should not be used if the
package has been damaged or opened
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.3.1 / Fragile, handle with
care| Indicates a medical device that can be broken or damaged if not handled
carefully
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.3.4 / Keep dry| Indicates
a medical device that needs to be protected from moisture
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.3.5 / Lower limit of
temperature| Indicates the lower limit of temperature to which the medical
device can be safely exposed
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.3.6 / Upper limit of
temperature| Indicates the upper limit of temperature to which the medical
device can be safely exposed
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.3.7 / Temperature limit|
Indicates the temperature limits to which the medial device can be safely
exposed
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.3.8 / Humidity limitation|
Indicates the range of humidity to which the medical device can be safely
exposed
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.3.9 / Atmospheric pressure
limitation| Indicates the range of atmospheric pressure to which the medical
device can be safely exposed
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.4.3 / Consult instructions
for use| Indicates the need for the user to consult the instructions for use
| | ISO 15223-1 / Medical devices-Symbols to be used with medical device
labels, labelling and information to be supplied| 5.4.4 / Caution| Indicates
the need for the user to consult the instructions for use for important
information such as warnings and cautions
| | IEC 60417 / Graphical symbols for use on equipment| 5333 / Type BF applied
part| Identifies a type BF applied part complying with IEC 60601-1
| | IEC 60417 / Graphical symbols for use on equipment| 5840 / Type B applied
part| Identifies a type B applied part complying with IEC 60601-1
| | IEC 60417 / Graphical symbols for use on equipment| 5335 / Type CF applied
part| Identifies a type CF applied part complying with IEC 60601-1
| | IEC 60417 / Graphical symbols for use on equipment| 5172 / Class II
equipment| Identifies equipment meeting the safety requirements specified for
Class II equipment according to IEC 61140
| | IEC 60417 / Graphical symbols for use on equipment| 5926 / Polarity of d.
c. power connector| Identifies the positive and negative connections of a d.
c. power supply
| | IEC 60417 / Graphical symbols for use on equipment| 5957 / For indoor use
only| Identifies electrical equipment designed for indoor use
| | IEC 60417 / Graphical symbols for use on equipment| 5032 / Alternating
Current| Indicates that the equipment is suitable for alternating current
only; to identify relevant terminals
| | IEC 60417 / Graphical symbols for use on equipment| 5031 / Direct current|
Indicates that the equipment is suitable for direct current only; to identify
relevant terminals
| | IEC 60417 / Graphical symbols for use on equipment| 5140 / Non-ionizing
electromagnetic radiation| Indicates generally elevated, potentially
hazardous, levels of non-ionizing radiation, or to indicate equipment or
systems e.g. that intentionally apply RF electromagnetic for diagnosis or
treatment
| | IEC 60417 / Graphical symbols for use on equipment| 5009 / Stand-by|
Identifies the switch or switch position by means of which part of the
equipment is switched on in order to bring it into the standby condition
| | IEC 60417 / Graphical symbols for use on equipment| 5016 / Fuse|
Identifies fuse boxes or their locations
| | IEC 60417 / Graphical symbols for use on equipment| 5008 / “OFF”|
Indicates disconnection from the mains, at least for mains switches or their
positions, and all those cases where safety is involved
| | IEC 60417 / Graphical symbols for use on equipment| 5007 / “ON”| Indicates
connection to the mains, at least for mains switches or their positions, and
all those cases where safety is involved
| | IEC 60417 / Graphical symbols for use on equipment| 5104 / Start; start of
action| Identifies the start button
| | ISO 7010 / Graphical symbols — Safety colours and safety signs —
Registered safety signs| M002 / Refer to instruction manual / booklet|
Indicates that the instruction manual / booklet must be read
| | ISO 7010 / Graphical symbols — Safety colours and safety signs —
Registered safety signs| P007 / No access for people with active implanted
cardiac devices| Indicates that people with active implanted cardiac devices
are prohibited from entering a designated area
| | ISO 7000 / Graphical symbols for use on equipment| 0623 / This way up|
Indicates the correct upright position of a package
| | IEC 60529 / Degrees of protection provided by enclosures (IP Code)| N/A|
Protected against solid objects over 12.5mm (e.g., a finger) and no protection
against liquids
| | IEC 60529 / Degrees of protection provided by enclosures (IP Code)| N/A|
Protected against solid objects over 12.5mm (e.g., a finger) and protected
against vertically falling drops of water or condensation
| | IEC 60529 / Degrees of protection provided by enclosures (IP Code)| N/A|
Protected against solid objects over 12.5mm (e.g., a finger) and protected
against falling drops of water, if the case is disposed at any angle up to 15
degrees from vertical
| | IEC 60529 / Degrees of protection provided by enclosures (IP Code)| No
specific reference no. / IP Classification| Protected from limited dust
ingress. Protected from water spray from any direction, limited ingress
protection
| | IEC 60529 / Degrees of protection provided by enclosures (IP Code)| No
specific reference no. / IP Classification| Protected from limited dust
ingress. Protected from water jets from any direction, limited ingress
protection
| | 21 CFR 801.109 / Prescription Devices| Prescription Device| Indicates that
the product is a medical device and Federal Law (USA) restricts this device to
sale by or on the order of a physician
| | Medical Devices Directive 93/42/EEC| CE Marking| CE marking indicates that
a product complies with applicable European Union regulations
| | BS EN 50419, Marking of electrical and electronic equipment in accordance
with article 11(2) of Directive 2002/96/EC (WEEE)| Crossed out wheelie bin|
Indicates a product should not be disposed of in a landfill; the black bar
indicates that the equipment was manufactured after 2005
| | Federal Communications Commission| FCC Marking| FCC marking indicates the
electronic device, which sold in the United States, is certified and the
electromagnetic interference from the device is under the limits that are
approved by Federal Communications Commission
| | N/A| Cuff Positioning| Indicates the correct positioning for the monitor
on the wrist
| | N/A| Cuff Positioning| Indicates the correct positioning for the monitor
on the wrist
| | N/A| Artery Marks| Types of marks used to indicate the correct positioning
of the artery for the upper arm
| | N/A| Cuff Positioning| Indicator on the cuff for left upper arm
| | N/A| Cuff Indicator| Range pointer and brachial artery alignment
positioning indicator on the cuff
| | N/A| Cuff Identifier| Identifies the type of cuff that is compatible with
the blood pressure monitor
| | N/A| Cuff Identifier| Identifies the type of cuff that is compatible with
the blood pressure monitor
| | N/A| Arm Circumference Range| Indicates the range of arm circumferences to
help with selection of the correct cuff size
| | N/A| Warnings| Various warning symbols to indicate a potentially hazardous
situation which, if not avoided, could result in death or serious injury
| | N/A| Marking for the position of the replaceable air tube| Indicates the
position to insert the air tube
| | ISO 7000 / Graphical Symbols for use on equipment – Registered symbols|
3125 / Wash by Hand| Indicates that cleaning the article is allowed only by
washing by hand
| | ISO 7000 / Graphical Symbols for use on equipment – Registered symbols|
3124 / Do not bleach| Indicates that bleaching the article is not allowed
| | ISO 7000 / Graphical Symbols for use on equipment – Registered symbols|
3109 / Do not tumble dry| Indicates that tumble drying is not allowed
| | ISO 7000 / Graphical Symbols for use on equipment – Registered symbols|
3104A / Line drying in shade| Indicates that line drying in the shade is
allowed
| | ISO 7000 / Graphical Symbols for use on equipment – Registered symbols|
3113 / Do not iron| Indicates that ironing is not allowed
| | ISO 7000 / Graphical Symbols for use on equipment – Registered symbols|
3114 / Do not dry clean| Indicates that dry cleaning is not allowed
| | ISO 7000 / Graphical Symbols for use on equipment – Registered symbols|
3122 / Do not professional wet clean| Indicates that wet cleaning in the
profession dry cleaning process is not allowed
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>