JAMARA 033212 High End Micro Analog Instructions
- July 16, 2024
- JAMARA
Table of Contents
JAMARA 033212 High End Micro Analog Instructions
General information
JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this is due to improper operation or handling errors. The Customer alone bears the full responsibility for the proper use and handling, including without limitation, the assembly, the charging process, the use and choice of the operation area. Please refer to the operating anduser instructions, it contains important information and warnings.
Certificate of Conformity
Hereby JAMARA e.K. declares that the product „High End Micro, No. 033212“
complies with Directive 2014/30/EU und 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the
following Internet address:
www.jamara-shop.com/Conformity
Technical data:
Nominal tension
Torque (kg/cm)
Transit time (Sec./60°)
Gear
Ball bearing
Dimensions (mm)
Weight (g)
4,8V ~ 6,0 V
1,2 kg/cm (4,8 V)
1,4 kg/cm (6,0 V)
0,11 Sec. (4,8 V)
0,09 Sec. (6,0 V)
Plastic
no
32 x 23 x 29,5 mm
12 g
All rights reserved. Copyright JAMARA e.K. 2024
Copying or reproduction in whole or part, only with the expressed permission
of JAMARA e.K
Disposal restrictions
Electrical appliances must not be disposed of in domestic waste and must be
disposed of separately. You are obliged to take out the batteries, if
possible, and to dispose of the electrical equipment at the communal
collection points. Should personal data be stored on the electrical appliance
you must remove them by yourself.
info@jamara.com
www.jamara.com
Service – Tel. +49 (0) 75 65/94 12-777
service@jamara.com
References
- Naslovnica - Net.hr
- t-trade.de is available for purchase - Sedo.com
- jamara.com
- Modellbau Zentral - Peter Hofer - Altdorf UR
- Reitter Modellbau & Robotics - Zubehör, Ersatzteile, Bausätze
- Mooser T-Trade: Dein neuer Lieblings-Online-Shop für Plastik Modellbau
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>