SoundCore Rave Party 2 Party Speakers A3399 User Manual

SoundCore Rave Party 2 Party Speakers A3399

USER MANUAL

At a Glance

1. PartyCast
2. Volume up
3. Play/Pause
4. Volume down
5. Light mode
6. BassUp
7. Power
8. Bluetooth
9. Mic reverb
10. Mic gain
11. Mic volume
12. AUX
13. USB-A for USB playback and charging out
14. DC for charging in
15. Microphone

Charging

Charge your Speaker

Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.

Check Battery Level

Charge your USB Devices

Charge your USB devices through the USB port.

Powering On/Off

This speaker will power off automatically after 20 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode

With this speaker, you can enjoy music through your Bluetooth-enabled devices.

• This speaker can pair with 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button once to re-enter Bluetooth pairing mode.
• This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
• Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

TWS (True Wireless Stereo) Mode

Two identical Rave Party 2 speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as L channel and the other as R channel).

1. Connect either speaker with your Bluetooth device.
2. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.

To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.

PartyCast Mode

You can wirelessly connect up to 100 identical Rave Party 2 speakers together.

1. Connect a Rave Party 2 speaker with your smartphone or tablet as Speaker

1. 2. Press the PartyCast button once on Speaker 1 and all the additional speakers to enter the pairing mode. When successfully connected, you will hear a prompt sound.

• PartyCast 2.0 technology can sync up stereo sound and is compatible with PartyCast 1.0. Any Rave Party 2 speaker can connect with a speaker supporting PartyCast 1.0.
• To exit the PartyCast mode, press the PartyCast button once on any Rave Party 2 speaker.

MIC/USB/AUX Mode

Insert a microphone, a USB storage device, or a 3.5 mm audio cable.

When using AUX mode, control audio playback via the connected device.

Button Controls

Reset

Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.

Light Effects

Download the Soundcore app to check all available light modes.

• Campfire Vibes
• Romantic Stroll
• Neon Night
• Flow
• Spring Break
• Party
• Euphoric Dance

Soundcore App

Download the Soundcore app to enhance your experience.

Product information: Check the product name and software version, or read the user manual.

Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.

Battery status: Indicates the remaining battery level of your speaker.

Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.

EQ settings: There are 6 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.

• Soundcore Signature: Normal EQ mode with well-balanced sound.
• Voice: Voices stand out more clearly from other ambient sounds.
• Treble Boost: High frequencies are enhanced.
• Balance: No enhancement for high-frequency and low-frequency sounds.
• Custom: Customize the EQ setting to suit you in the app.
• BassUp: Turn on BassUp to enhance the low-frequency sound.

Set Auto-power off time: Set an auto-power off time (5/10/20/60 minutes, 20 minutes by default), the speaker will automatically power off when the time is up. Voice prompt: Mute or restore the voice prompt while powering on/off.

Specifications

Specifications are subject to change without notice.

Support Videos

How to pair Rave Party 2 with Flare 2

How to pair Rave Party 2 with Rave PartyCast

How to pair Rave Party 2 with Rave Neo

How to use an external mic with Rave Party 2

How to pair Rave Party 2 with Select Pro

Rave Party 2 FAQ

1. How do I fix the “no-sound” issue when Rave Party 2 is paired with

other PartyCast™ speakers?

Double press the PartyCast™ button on Rave Party 2.

2. What is the size and weight of Rave Party 2?

The size is 7.5 × 7.8 × 15.7 in (19.1 × 19.8 × 40 cm). The weight is 11.7 lb (5.3 kg).

3. What is Rave Party 2’s frequency range?

Rave Party 2 plays sounds from 50 Hz to 20 kHz.

4.What is Rave Party 2’s driver size?

The woofer is 4″ and the two tweeters are 2″ each.

5. How do I turn off Rave Party 2’s voice prompts?

1). Connect your device to Rave Party 2.

2). Open the Soundcore app.

3). Press the settings button in the top right corner to access more options.

4). Turn off prompt tones.

6. How do I reset Rave Party 2?

Turn on the speaker, then hold the Bluetooth and Volume + buttons simultaneously for 5 to 8 seconds.

7. I haven’t used Rave Party 2 for a while. Why won’t it turn on?

If you haven’t charged or used Rave Party 2 in a long time, the battery may be depleted. Charge it for at least one hour before turning it on.

8. What is the water-resistance rating of Rave Party 2?

IPX4. Rave Party 2 can handle light water splashes.

9. How do I pair two Rave Party 2 speakers via TWS?

1. Turn on the two Rave Party 2 speakers and connect either one to your device via Bluetooth.

2. Hold the Bluetooth button for 2 to 3 seconds on both speakers until they flash white.

3. Wait for 3 to 5 seconds until you hear the chime. This means they are successfully paired.

4. Once paired, the primary speaker’s Bluetooth shows a steady blue light, while the secondary speaker’s Bluetooth shows a white light.

10. Can I use Rave Party 2 to charge other devices?

Yes, there is a USB-A port for charging other devices.

11. Can I connect a microphone to Rave Party 2 for karaoke?

Yes, connect your microphone to the MIC port on the back of the Rave Party 2.

12. How do I upgrade Rave Party 2’s firmware via the Soundcore app?

1. Open the Soundcore app and press Update Firmware.

2. Do not use your phone while the firmware is updating unless you’ve set the Soundcore app to run in the background.

3. Rave Party 2 will restart automatically after upgrading.

13. How do I pair Rave Party 2 speakers together wirelessly via

PartyCast™?

You can wirelessly connect up to 100 Rave Party 2 speakers together via Partycast™. Follow these steps:

1. Connect a Rave Party 2 speaker with your smartphone or tablet as a master speaker.

2. Press the PartyCast™ button once on the master speaker and all the additional speakers to enter pairing mode. When successfully connected, you will hear a chime.

14. How long does it take to fully recharge Rave Party 2?

By using the original charger, you can recharge to 100% in 5.5 hours.

15. What should I do if the speaker and my phone fail to pair?

1. Confirm that the speaker is fully charged and not paired with other devices.

2. Forget all Bluetooth pairing records on your device.

3. Restart your speaker and your device.

4. Disable and enable Bluetooth on your device.

5. Reset the speaker.

6. Try to connect the speaker to another device.

16. Is a PIN or password needed when pairing Soundcore Rave Party 2

with a device?

A PIN or password is not needed when pairing a soundcore speaker with a device. If you encounter an issue during the pairing process, please try these steps:

1. Confirm that Rave Party 2 is fully charged and not connected to other devices.

2. Forget all Bluetooth pairing records on your device.

3. Restart Rave Party 2 and your device.

4. Disable and then enable Bluetooth on your device.

5. Reset Rave Party 2 by holding the Bluetooth and Volume+ buttons simultaneously for 5 to 8 seconds.

6. Connect Rave Party 2 to a different device.

17. How do I fix the Soundcore Rave Party 2 noise issues？

1. Confirm that the speaker is fully charged.

2. Reset the speaker.

3. Restart your speaker and your device.

4. Try connecting the speaker to another device. If possible, try using another app or audio source.

5. Ensure there are no physical objects interfering with the Bluetooth connection, such as a doorway or wall.

18. What should I do if Soundcore Rave Party 2 doesn’t emit sound?

1. Confirm that the speaker is fully charged.

2. Reset the speaker.

3. Restart your speaker and the device it is paired with to test again.

4. Try connecting the speaker to a different device. If possible, try another app or audio source.

5. Make sure the volume on both the speaker and the paired device are turned up.

19. What should I do if the speaker is not charging?

1. Make sure the charger is working properly.

2. If you can still turn on your Rave Party 2, reset it.

3. Recharge the speaker for at least half an hour to prevent over-discharge.

20. How do I fix the “no-sound” issue when Rave Party 2 is paired with

other PartyCast™ speakers?

Double press the PartyCast™ button on Rave Party 2.

DOWNLOAD

SoundCore Rave Party 2 Party Speakers A3399 User Manual – [Download PDF]

SoundCore Rave Party 2 Party Speakers A3399 Quick Start Guide – [Download PDF]

A3399 Rave Party 2 Declaration of Conformity – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>