LIFE Wall Mounted Bathroom Air Heater 2000W User Manual

LIFE Wall Mounted Bathroom Air Heater 2000W

Wall mount bathroom fan heater with IP23 protection, 2000W

This product is only suitable for well insulated places or occasional use

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
Read the operating instructions carefully before putting the appliance into operation and keep the instructions, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

USER MANUAL SYMBOLS
Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING: This sign warns you of dangers to your health and indicates possible injury risks.

CAUTION: This sign refers to possible hazards to the machine or other objects.

NOTE: This sign highlights tips and information.

SAFETY INSTRUCTIONS

1. & WARNING: The appliance is designed exclusively for its intended purpose. Use the appliance according to the following instructions. There is a possibility of injury from misuse of the appliance.

2. This appliance is intended for wall mounting only. You should never use it as a portable appliance.

3. This appliance must be placed in such a way that the warm air vent faces downwards and not in any other direction.

4. The appliance must be installed in such a way that the switches and other buttons cannot be used by a person who is in the bathtub or shower.

5. The appliance is suitable for installation on surfaces with normal flammability limits, e.g., wood, plasterboard, masonry. It is not suitable for installation on highly flammable surfaces (e.g., made of polystyrene, fabric).

6. Before drilling the mounting surface, check that there are no obstacles hidden under the mounting surface, such as pipes or cables.

7. The chosen location of the appliance must ensure that the product is well fixed (e.g. to a fixed wall) and securely connected to the power supply.

8. Check that the voltage indicated on the appliance rating label corresponds to the voltage in the mains.

9. Always plug the appliance into an outlet that is earthed. Risk of electric shock!

10. Do not place the appliance in front of or below the power outlet.

11. Make sure the appliance is placed on a stable, flat surface.

12. Do not use the appliance outdoors.

13. Keep a safe distance from flammable objects such as furniture, curtains, paper, etc.

14. Do not operate the appliance without supervision. If you should leave the workplace, always unplug the appliance.

15. Never use the appliance near hot surfaces.

16. Never use the appliance in rooms where flammable materials (e.g., gasoline) are stored, when working with flammable materials, gas leakage or other flammable materials such as varnish or glue.

17. The room which is to be heated should not contain any easy inflammable materials (e.g., petrol, solvents, spray cannisters etc.) or other easy combustible materials (e.g., wood or paper). Keep such materials away from equipment. Risk of fire!

18. Do not place or hang the following, similar or other flammable materials such as paper, plastic, etc., on, in front of or inside the appliance.

19. WARNING: In order to avoid overheating, do not cover the heater. Risk of fire!

20. WARNING: Do not cover or block the heat outputs or air intakes of the appliance.

21. Do not let the power cord hanging off the edge of a table or bench, or come into contact with sharp edges and hot surfaces.

22. The surface temperature of the appliance may be very high during operation. Never touch these parts of the appliance. Risk of injury and burns!

23. CAUTION: Do not place the appliance on carpets.

24. CAUTION: Do not place the power cable under carpets.

25. CAUTION: The purpose of the protective grill is to avoid direct access to the heated parts when the device is in use. Do not place objects inside the device. Never block the inlet and outlet grills. Risk of fire and electric shock!

26. WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

27. Always remove the plug from the socket after usage (pull the plug itself, not the lead).

28. Always unplug the appliance and let it cool down when you want to move it to another location, store it or clean it.

29. Always switch off and unplug the appliance when inserting/ removing accessories or when it’s not being used.

30. Always unplug the heater when moving it from one location to another.

31. Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way.

32. Do not wind the cord around the appliance or bend it.

33. Regularly check the appliance and cable for signs of damage. Do not continue to operate the appliance in case of damage.

34. Do not operate the appliance with a damaged cord. In order to avoid the risk of an electric shock, never try to repair the appliance by yourself. Bring it to the authorized service station for repair. Use only the original spare parts.

35. If the surface is cracked, disconnect the appliance from the power supply to avoid electric shock.

36. If the surface of the appliance gets wet, unplug the appliance from the power supply to avoid the possibility of electric shock.

37. This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are under supervision or have been given instructions concerning use of the appliance in a safe way and understand the hazards involved.

38. CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

39. Keep the appliance and its cord out of the reach of children and pets.

40. Children being supervised not to play with the appliance.

41. ln order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
    WARNING: Do not allow small children to play with the foil. Danger of suffocation!

42. Never immerse the appliance into water during cleaning. Check “CLEANING” paragraph for cleaning instructions.

43. Never immerse the appliance into water or any other liquid.

44. To protect again electric shock, do not immerse the cord, plug or unit in water or any other liquid.

45. Do not touch the appliance with wet or damp hands.

IMPORTANT SECURITY WARNING: This is an additional heating appliance. Never leave the appliance unattended for several hours. Do not leave the house without turning off the heater.
RISK OF BURNS: The air develops a high temperature!! Please do not allow children to play unattended near the appliance.

APPLIANCE INSTALLATION

1. Remove all packaging materials and keep out of reach of children.
2. After unpacking the device, check for possible damage. In case of damage or visible problem, do not use the device and contact the store where you bought it.
3. Check that the voltage of the mains you will use matches the operating voltage of the device and that they are in correspondence.

To properly place the device, you must ensure enough space around it and take into account the safety instructions. The device must be placed in a space based on the following diagram:
This air heater is suitable for installation in Zone 3 or the safe zone of a bathroom (or similar space) only if the permanent connection to the mains supply is made in accordance with the requirements of building regulations
(including wiring regulations).
If in doubt, consult a qualified electrician.

WALL MOUNTING

After choosing the appropriate place for placement in your space, place the device on the wall as shown in the diagram below.

1. Mark the position of the three holes to be drilled so that the
   distance between holes A and B on
   the wall corresponds to the distance between the two sockets located at the back of the device (15.2cm) and the third hole at the bottom to be located in the middle of the distance of the top two holes and the height of the hole to be 37cm down from the middle of the top holes.
   NOTE: The screw at point C must be tightened sufficiently.

2. Place a dowel in each hole.

3. Screw in two screws, one in each hole (at points A and B). Allow the head of the screw to protrude a little (about 10mm) so that the device can be hung.

4. Hang the device on the screws.

5. Insert a screw at point C and hang the device on the screws until the device is properly locked in place.

PARTS IDENTIFICATION

1. Control panel with display
2. Towel hanger
3. Air exhaust grid

CONTROL PANEL

1. Power button
2. Mode selection key
3. Timer button
4. Power-on indicator light
5. Fan operation indicator
6. Timer icon
7. LED screen
8. Indicator of operation of the 1st heating level (1000W)
9. Indicator of operation of the 2nd level of heating (2000W)
10. Weekly timer icon
11. Open window icon
12. Delay mode icon

REMOTE CONTROL

1. Power button
2. 24H timer button
3. Mode selection key
4. Lock button (child safety)
5. Function key for open window
6. On/off time selection key
7. Weekly timer button
8. “+” key
9. “-” key
10. “Set” button

INITIAL USE OF THE HEATER

Turn the main power switch to the “I” position and connect the plug to a properly installed protected and grounded 220-240V~, 50/60Hz outlet. A beep will then be heard and the activation indicator light on the control panel will light up. The default temperature will then appear on the display and flash for 3 seconds.

SET DATE AND TIME
Set the device time before turning on the device.

1. Before turning on the device, press the” ” button on the remote control. The control panel display will activate and the room temperature will be displayed.
2. Press the “SET” key once, the “ W ” indicator light will light up, then select the correct day of the week (1= Monday, 2= Tuesday and sq on) using the “ ” keys.
3. Press the “SET” key again, the “ ” indicator light will light up, then set the correct time (0l=lam, 02= 2am, 00=24 and so on) using the “ ” keys.
4. Press the “SET” key for the third time, the indicator light” ‘ will light up, then set the correct minutes of the hour (01=1 minute, 02= 2 minutes, 25= 25 minutes and so on) using the keys
   “ “,
   The display will flash for 5 seconds. Press the “SET” button again to confirm the above settings within this time, otherwise the device will return to standby mode.

NOTE: In case you do not confirm by pressing the “SET” button in time, the device will keep the time settings until it is turned off.

HOW TO USE

1. Activate the air heater by pressing the activation button on the control panel or from the remote control. The power-on indicator light “ ” will light up on the display, the appliance will start blowing out cold air, and the fan indicator light will light up.
2. Press the “ ” button once to select the first power level (1000W). The appliance will emit hot air and the “ and fan “ ” indicator lights will light up.
3. Press the “ ” button again to select the second power level (2000W). The appliance will emit hot air and the and fan “ ‘ indicator lights will light up.
4. Press the” ” button a third time to select the fan mode and the fan indicator light “ ‘ will light up.

TEMPERATURE ADJUSTMENT (ONLY FROM THE REMOTE CONTROL)
Set the desired temperature using the “ ” buttons on the remote control. The adjustable temperature range is from 10°C to 49°C.
When the air temperature of the room drops by 2°C lower than the desired temperature you set, the device is activated at the first power level (1000W) and the corresponding indicator light” ” on the screen lights up.
When the air temperature of the room drops by 4°C lower than the desired temperature you set, the device is activated at the second power level (2000W) and the corresponding indicator light “ ” on the screen lights up.
When the room air temperature is greater than or equal to the desired temperature you set, the fan function (cold air) is activated.

NOTE: During initial use and due to the insulating materials surrounding the resistors, an unpleasant odor and/or smoke may occur. This is not a malfunction of the air heater and subsides after the first heating of the resistors.

CAUTION: If the air heater is damaged, switch it off immediately and unplug it from the outlet. If the cable is damaged or worn, visit a qualified technician for repair or replacement

TIMER SETTING

24 hour timer:
The timer can be set to turn off the device at a certain time (0-24 hours).
To set the 24-hour timer, press the “ ” button on the control panel or the “ ” button on the remote control. Then press the “ ” key to successively increase the setting time ((00= device off, 01=1Q, 02=2Q … 24=24 Hours and so on). When you select the desired time, the indicator light “ ” on the display.

NOTE: “00” means the timer is off.

Weekly timer:
Set a timer to turn on the appliance

1. Press the” ” button on the remote control and the “ W ” indicator light will light up. The number “1” corresponding to the day Monday will appear on the screen.

2. Press the “ ” key again, the “ ‘” indicator light will light up, then set the correct time (01=1am, 02= 2am, 00=24 and so on) using the” “keys.

3. Press the” ” key for the third time, the” ” indicator light will light up, then set the correct minutes of the hour (01=1 minute, 02= 2 minutes, 25= 25 minutes and so on) using the ‘ ‘ keys.
   Set a timer to turn off the appliance

4. Press the” “key for the fourth time, the” indicator light will light up, then set the correct time (01=1am, 02= 2am, 00=24 and so on) using the “ ” keys.

5. Press the” ” key again, the” ” indicator light will1igitr”up, then set the correct minutes of the hour (01=1 minute, 02= 2 minutes, 25= 25 minutes and so on) using the keys “ ‘·
   NOTE: The above settings refer to Monday.

6. Press the” ” button one more time, the indicator light “ ‘” will light up and the number “2” corresponding to Tuesday will appear on the screen. To set the timer for Tuesday follow the same steps as the instructions above for setting for Monday.

7. Once you have finished setting all the days of the week you want by selecting 1-7 (l=Monday, 2=Tuesday … 7=Sunday, etc.), press the” “button on the remote control to set the temperature
   using the “ ” keys. The adjustable temperature range is from 10°c to 49°C.

NOTE: In the weekly setting, the device will turn on as soon as you complete the settings for the current day. You can set the time of activation, deactivation as well as the desired temperature for all days of the week.

OPEN WINDOW MODE (ADJUSTABLE FROM REMOTE CONTROL ONLY)
Press the “ ” button and the “ ” indicator light on the display will light up. In this mode, the device works as an energy-saving appliance in which it detects and stores the ambient temperature automatically. The device will automatically stop its operation when the ambient temperature changes significantly (change greater than or equal to 3°C). The device can be activated again via the “ON/OFF” button.

To turn off the open window function, press the “ ” button again and the “ ” indicator light from the display will turn off.

DELAY FUNCTION (ADJUSTABLE FROM REMOTE CONTROL ONLY)
The time delay function can be applied when the device is turned on and off.
Press the” ” button and the corresponding operation indicator will light up on the screen. Press the” “button once and “ ” and “ ” will appear on the screen. Set the activation time using the “ “keys (01=1 hour, 24=24 hours … 00= off etc.)
Press the “ ” button again and “ ” and “ ” will appear on the screen. Set the switch-off time using the “ ” keys (01=1 hour, 24=24 hours … 00=function disabled, etc.)

NOTE: Press the” ” key. The display of the corresponding number will flash for 5 seconds.
The setup must be completed within this time or the device will return to standby mode. This function should be set every time after switching on the device.

CHILD LOCK FUNCTION (SETTING FROM THE REMOTE CONTROL ONLY)
Press the” “button on the remote control once to activate the child safety function. All indicators and the LED display are off except the “ ” indicator.
Press the “ ” button again to turn off the function

CLEANING

1. Always unplug the appliance from the power supply and allow it to cool thoroughly before cleaning or assembling.
2. Do not pour water on or inside the fan heater.
3. Clean the appliance housing and control panel with a soft damp cloth.
4. Do not use anything abrasive that can scratch or damage the appliance. Do not use a wire brush or other abrasive utensils for cleaning.

STORAGE

1. Always unplug the appliance before storing it.
2. Always make sure that the appliance is cold, dry and clean before storing.
3. Always store the appliance out of the reach of children.
4. Always store the appliance in a safe and clean place. For the better protection of the appliance,store it in its original packaging.

DISPOSAL OF APPLIANCE AND ACCESSORIES
This symbol appearing on the product, its accessories or accompanying manuals indicates that the product and its electronic accessories should not be disposed of with other household trash.
In order to avoid possible harmful effects on the environment or health due to uncontrolled waste disposal, please separate these products from other types of waste and recycle them.
Household users should contact either the store where they purchased this product or their local services for details of where and how they can return these products for environmentally safe recycling.

DISPOSAL OF BATTERIES
This marking on the battery, manual or packaging indicates that the batteries of this product should not be disposed of with other household waste at the end of their life cycle.

Ionias Kalochori, 570 09 Thessaloniki, Greece, TEL. +30 2310 700.777
e-mail: info@sun.gr-www.life.gr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>