MARK-10 TT05 Series Digital Torque Testers User Guide
- June 4, 2024
- MARK-10
Table of Contents
MARK-10 TT05 Series Digital Torque Testers
Thank you!
Thank you for purchasing a Mark-10 Series TT05 Torque Tester. We are confident
that you will get many years of service from this product.
Please read through this Quick Start Guide and the com-plete User’s Guide
before using the tester.
IMPORTANT SAFETY CONSIDERATIONS
Force and torque measuring instruments are sensitive and must be treated with care. Please review the safety information provided in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
| Qty. | Part No. | Description |
|---|---|---|
| 1 | MTT05-12 / MTT05-25 / MTT05-50 / MTT05-100 | Series TT05 digital torque |
tester
1| AC1030 / AC1031 / AC1032 / AC1035| AC adapter/charger w/US, EU, UK, or AUS
prong
1| 08-1026| Rechargeable NiMH battery (inside the instrument)
1| –| Certificate of calibration
1| 09-1165| USB cable
POWER
To power on the tester, press the button. Press and hold to power off. The tester may be powered either by the internal rechargeable battery or an AC adapter/charger. The battery will last approximately 7 hours with the backlight turned on, and 24 hours with the backlight turned off before recharging is necessary
LITERATURE & SOFTWARE DOWNLOADS
Download at: www.mark-10.com/downloads
-
User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product and read it thoroughly before use. -
USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter. Required for communication with a PC. Follow the installation instructions provided in the user’s guide. -
MESUR® family of software – see below.
INSTALLING MESUR® SOFTWARE
Mark-10 offers three data collection applications:
MESUR® Lite
Free basic data acquisition application, for data tabulation and exporting to
Excel. Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-configurable
start and stop triggers and other tools. Compatible with gauges and test
stands for load vs. time or load vs. travel. MESUR®gauge Plus adds test stand
motion control coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. The minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>