Merra HCF-0608-GO-BNHD-1 1-Light Modern Wall Sconce Light Fixture Instructions
- October 30, 2023
- MERRA
Table of Contents
Merra HCF-0608-GO-BNHD-1 1-Light Modern Wall Sconce Light Fixture
Product Information
The product is a lamp fixture that requires assembly and electrical connections. It includes a canopy, mounting bracket, lamp holder, mounting bolts, wire nuts, and canopy bolts. The product is designed to hold one G9 bulb with a maximum wattage of 40W.
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of your new lamp and prepare your junction box (not included).
- Remove the canopy bolts (F) and take the mounting bracket (C) off the canopy (G).
- Connect the mounting bracket to your junction box using the mounting bolts (D).
- Make electrical connections using the wire nuts (E).
- Be careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy bolts.
- Install the bulb (A) into the socket on the lamp holder (B).
To ensure safe and proper usage, please refer to the instructions carefully and contact the manufacturer at help@cs-supportpro.com for any questions or concerns. For a PDF copy of the latest version of these instructions, scan the QR code provided.
INSTRUCTIONS
DANGER
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore power to the line until the lamp has been FULLY installed.
- DO NOT use bulbs exceeding the recommended wattage.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Remove the canopy bolts (F) and take the mounting bracket (C) off the canopy (G).
- Connect the mounting bracket to your junction box using the mounting bolts (D).
- Make electrical connections using the wire nuts (E).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy bolts.
- Install the bulb (A) into the socket on the lamp holder (B). This fixture has been rated for one G9 bulb up to 40W.
CONTACT US
Thank you for choosing our products! If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP! For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
HCF-0608-GO HCF-0608-NI HCF-0608-BK Rev. 24 Aug. 2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>