MARK-10 M7I Force and Torque Indicator User Guide
- June 4, 2024
- MARK-10
Table of Contents
Model M7I
FORCE / TORQUE INDICATOR
Quick Start Guide
OTHER MARK-10 PRODUCTS
A full line of force and torque measurement products and related items, including force gauges, torque gauges, force, and torque test stands, sensors, grips, software, and more.
Force and torque measurement engineered better
Thank you!
Thank you for purchasing a Mark-10 Model M7I Advanced Force/ Torque Indicator.
We are confident that you will get many years of service from this product.
The M7I is designed to work with a wide range of Mark-10 Plug & Test® remote
smart force and torque sensors. Please read through this Quick Start Guide and
the complete User’s Guide before using the gauge.
IMPORTANT SAFETY CONSIDERATIONS
Force and torque measuring instruments are sensitive and must be treated with
care. Please review the safety information provided in the User’s Guide prior
to operating the indicator.
LIST OF INCLUDED ITEMS:
| Part No.| Description
---|---|---
Qty.| M7I| M7IE| M7IU| M7IA
1| 12-1049| 12-1049| 12-1049| 12-1049| Carrying Case
1| AC1030| AC1031| AC1032| AC 1035| AC adapter w/US, EU, UK, or AUS prong
1| 08-1026| 08-1026| 08-1026| 08-1026| Rechargeable NiMH Battery (inside
gauge)
1| –| –| –| –| Certificate of calibration
1| 09-1165| 09-1165| 09-1165| 09-1165| USB cable
OVERVIEW
To power on the indicator, press the
button. Press and hold to power off.
The indicator may be powered either by the internal rechargeable battery or an
AC adapter/charger. The battery will last approximately 7 hours with the
backlight turned on, and 24 hours with the backlight turned off before
recharging is necessary.
The M7I indicator must be used with a Plug & Test® remote smart sensor. All
configuration and calibration data is saved within the sensor’s connector.
Although the menu may be accessed if the sensor is not connected, changes will
not be saved. Refer to the M7I User’s Guide for further details.
LITERATURE & SOFTWARE DOWNLOADS
Download at:www.mark-10.com/downloads
- User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product and read it thoroughly before use.
2. USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions provided in the user’s guide.
3 . MESUR® family of software – see below.
INSTALLING MESUR® SOFTWARE
Mark-10 offers three data collection applications:
MESUR® Lite
Free basic data acquisition application, for data tabulation and exporting to
Excel. Compatible with gauges only, not test stands.
MESUR® gauge / MESUR® gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-configurable
start and stop triggers and other tools. Compatible with gauges and test
stands for load vs. time or load vs. travel. MESUR® gauge Plus adds test stand
motion control coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. The minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: 631-842-9200
Fax: 631-842-9201
www.mark-10.com
[email protected]