Dongguan Juyou Industrial F918 Household Sofa Bluetooth Speaker Instructions
- June 6, 2024
- Dongguan Juyou Industrial
Table of Contents
Product Instruction
Bluetooth/USB/charging/AUX/multifunctional touch button furniture soundbox
Please carefully read the instruction before using Function introduction
Thank you for choosing our multifunctional sofa soundbox! This soundbox adopts
a full touch button, auto function switch mode, surround sound effects
Sincerely hope that it can bring you who love music with enjoyment in the
digital era. Main functions
****USB: plug USB device to automatically switch to USB flash disk mode, scan
the music file in a USB device and automatically play.
AU X AUX: plug 3.5mm audio cable to AUX port to automatically enter AUX
mode, can connect mobile phone/computer/TV/MP3/MP4/MP5 and another music
player for music play. Under this model, only the volume up and down of the
sound source device can be controlled.
BT/Bluetooth: default Bluetooth mode after the start, Bluetooth search will be
started for matching, after matching is successful, the music can be remotely
played by Bluetooth device, the Bluetooth distance is within 10m in a broad
and open area, and the use distance is different due to different
environments.
USB charging: plug USB data cable to charge mobile phone/mobile power source,
etc. In the situation of playing music, charging may lead to failure of touch,
please cut off power and restart.
Attention: it is recommended to charge after shutdown or stop playing music.
Startup and shutdown button: single click touch or short press for startup,
long press for the shutdown.
MODE MODE/M: the mode switch, when Bluetooth/USB/AUX are connected at the same
time, it can be switched to another mode
Pause mode: perform pause function when the device is playing music
Previous/Next: support local songs in USB flash disk/downloaded. The network
terminal cannot be supported, please
use the sound source device to control it.
Turn down the volume: long press the touch button to turn down the volume
(when overlapped with previous/next function, it is long-press) Short press
and long press are OK if not overlapping.
Turn up the volume: long press the touch button to turn up the volume (when
overlapped with previous/next function, it is long-press) Short press and long
press are OK if not overlapping.
Repair guide and problem solution
Before repairing the product, please check the following solution to find the
possible cause of your problem, some simple checks or minimum adjustments you
make may solve the problem and recover normal operation, if you have a
question on some inspection essential, or have no solution, please ask the
professional repair personnel to repair.
Problem
|
Solution
---|---
Soundless| Volume is set too low or the soundbox is not well connected.
Startup failure| The power source is not plugged in place, if the problem
of the power source is confirmed, replace the power source, if the power
source has no problem, the control box may have a problem, replace the control
box
No response| Please cut off power and try again, check whether the mobile
phone/USB flash disk/AUX is connected.
Button failure| Please cut off power and try again, do not press by force,
check whether there is impurity or
water, and restart.
Music play is disordered, skip| The product is light sensed touch, please
confirm that there is no object over the product touch button.
Bluetooth cannot match| Please shut down all other matched Bluetooth devices,
restart and search. Check whether the list of Bluetooth search devices is
full, delete useless Bluetooth, and connect again
AUX is soundless| Please confirm that the volume of the sound source device TV
or mobile phone is turned on and can normally play music, check whether the
audio cable is plugged in place and in good condition.
Remark| Please contact the dealer if there is another abnormal situation,
sorry for the inconvenience!
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>