Outsunny 84A-082 Hammock Stand Metal Black Instruction Manual
- June 1, 2024
- Outsunny
Table of Contents
Outsunny 84A-082 Hammock Stand Metal Black Instruction Manual
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
PARTS
Place both leg assemblies on the ground with the upward curving elbows facing
away from each other. Take the center-pole and place on the ground between the
two leg assemblies. Locate the holes on each end of the center-pole and face
them up. Slide one end of the center-pole over the end of one elbow pole on
the foot assembly. Push in silver lock-pin (figure 1) and continue to
slide pole until the lock-pin pops through the hole. Repeat on the other side.
Both upright poles have a pre-attached s-hook and end cap on one end and a lock-pin hole on the other. Take one upright-pole and align the lock-pin hole with the other lock-pin on the elbow pole of the foot assembly. Slide the upright pole over the elbow pole, push lock-pin down (figure 1) and continue to slide pole until the lock-pin pops through the hole (figure 2). Repeat on the other side.
If you have any questions, please contact our customer care center. Our
contact details are below.
001-877-644-9366
customerservice@aosom.com.
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
