COOPER Lighting Solutions IL51862623 Solar LED Dusk to Dawn and Motion Activated Area Light Instructions

COOPER Lighting Solutions IL51862623 Solar LED Dusk to Dawn and Motion

Activated Area Light

Product Information

The Solar LED Dusk to Dawn & Motion Activated Area Light is an all-in-one design light fixture available in three models: SBL10A50GY, SBL15A50GY, and SBL30A50GY. It provides a convenient and energy-efficient lighting solution for outdoor areas.

Important Safety Instructions

• Do not look directly into the solar motion light when illuminated.
• Allow the light fixture to cool before touching to prevent burn hazards.
• Any unauthorized changes or modifications to the equipment may void the user’s authorization to operate it.

Product Usage Instructions

Optimal Placement and Motion Sensor Considerations

1. Place the fixture where the solar panel is exposed to optimal sunlight. Avoid obstructions such as trees or property overhangs that may impede the light’s ability to generate a charge.
2. Ensure that the motion sensor is unobstructed for best results.
3. Note that high-traffic areas may result in frequent motion events, leading to quick battery depletion. Monitor your installation and adjust as necessary.

Packaging Contents

Optional Accessories (Ordered Separately)

• AA M 6*5.25mm Screws
• BB M8 Screw Washers
• CC AAA Batteries
• DD Remote Control

Items Required for Installation (Purchase Separately)

1. Philips Screwdriver
2. Safety Goggles
3. Adjustable Wrench
4. Work Gloves
5. Ladder
6. Power Drill

Specifications

• Motion Sensor Range: 25ft
• Sensing Angle: About 120 degrees
• Lumens: 1000lm or 1500lm or 3000lm (model-dependent)
• Power Specifications: Solar Panel and Rechargeable Nickel Manganese Cobalt Batteries (nonreplaceable), Battery Lifespan: 500 Cycle
• Operating Modes:
  • Motion, Dusk to Dawn (30 seconds)
  • Motion, Dawn, Motion (60 seconds)
  • +Dusk to Dawn (90 seconds)
  • Manual On, Manual Off

Preparing for Installation
Before installing the light fixture:

• Review the contents of the packaging to ensure all parts are present.
• Compare parts with the hardware included and package contents sections.
• Do not proceed if any part is missing or damaged.

Estimated Installation Time: 30 minutes

Checking the Initial Battery Charge

1. Prior to use, ensure batteries have been charged for 2 full days of sunlight. The battery requires 8 to 12 hours of full, direct sunlight to charge.

Motion Sensor Instructions

1. When deciding where to mount the fixture, consider that the motion sensor has a field of vision of 25ft in front of the light and about a 120-degree detection angle at a surrounding air temperature of 77F.
2. The motion sensor has a first-time use warm-up time of about 60 seconds. Wait at least 60 seconds after the first power-on before testing the motion sensor.
3. When testing the motion sensor during the daytime, cover the solar panel fully using a piece of cardboard and tape to override the Dusk to Dawn functionality. This allows accurate motion sensor performance testing.

Solar LED Dusk to Dawn & Motion Activated Area Light Instructions WITH ALL- IN-1 DESIGN

IMPORTANT SAFETY INSTRUCTIONS

• Product is Wet Location rated for outdoor use only.
• Please read and understand this entire manual before attempting to assemble, install or operate this light fixture
• Save these instructions and warnings for future reference
• This product contains Lithium Ion rechargeable batteries that are NOT replaceable.
• Disassembling this fixture will void the manufacturer warranty
• The Halo Solar LED D2D & Motion Area light is not a toy. Keep it out of reach from small children.
• Please ensure the fixtured is installed where it can receive direct light from the sun.
• If using a step ladder, you may require a second person to help install the solar motion light.
• Before installation, lay out all components and check against the part list section in this manual.

Warning: READ AND FOLLOW THESE INSTRUCTIONS

CAUTION: Please don’t look directly into the solar motion light when illuminated.| NOTICE: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authorization to operate this equipment.| IMPORTANT:

• Please make sure the fixture is placed where the solar panel is exposed to optimal sunlight.
• Be aware of objects such as trees or property overhangs that may impede the light’s ability to generate a charge. Please make sure that the motion sensor is unobstructed for best results. Be aware that high-traffic areas will result in frequent motion events which could lead to the battery being depleted quickly.
• Monitor your specific installation and adjust as necessary.

---|---|---
CAUTION:

• BURN HAZARD.
• Allow the light fixture to cool before touching.

PACKAGING CONTENTS

Hardware Kit (B) Included

Optional Accessories (Ordered Separately)

AAA – Replacement Remote – Catalog Number: SBL-RC

ITEMS REQUIRED
(Purchase separately)

1. Philips Screwdriver
2. Safety Goggles
3. Adjustable Wrench
4. Work Gloves
5. Ladder
6. Power Drill

SPECIFICATIONS

MOTION SENSOR RANGE| SENSING ANGLE| LUMENS| POWER SPECIFICATIONS| OPERATING MODE| MOTION SENSOR TIME OUT SETTING
---|---|---|---|---|---
25FT| 120°|

• 1000lm OR
• 1500lm OR
• 3000lm

|

• Solar Panel and
• Rechargeable Nickel
• Manganese Cobalt
• Batteries (non- replaceable)
• Battery Lifespan: 500 Cycle

|

• Motion, Dusk to Dawn, Motion
• +Dusk to Dawn, Manual On, Manual Off

|

• 30 seconds,
• 60 seconds,
• 90 seconds

PREPARING FOR INSTALLATION

REVIEW THIS INFORMATION TO ENSURE A REVIEW CONTENTS

• Before installing the light fixture, take the contents out of the packaging and ensure that all parts are present. Compare parts with the hardware included and package contents
• sections. Do not attempt to assemble, install, or operate this light fixture if any part is missing or damaged. ESTIMATED INSTALLATION TIME: 30 MINUTES

CHECK THE INITIAL BATTERY CHARGE

1. Prior to use, make sure batteries have been charged for 2 full days of sunlight. (The battery will require 8 to 12 hours of full, direct sunlight to completely charge.) Ensure the fixture is OFF by selecting that button on the included remote. If possible aim the solar panel located on the back of the fixture toward the South and tilt it approximately 50 degrees from horizontal.
2. Check the battery indicator light located in the fixture lens before install (see table below)
3. Actual operating time will vary depending upon how frequently the light is turned on by the motion sensor
4. Solar lighting is not designed to equal standard 120V lighting. The amount of light output is reduced to allow the sun time to fully recharge the battery between lighting cycles.
5. Solar collection is only effective in direct sunlight. Every hour the light is on requires a minimum of 5 hours of sunlight charging.

MOTION SENSOR

1. When deciding where to mount this fixture please keep in mind that the motion sensor that activates the light has a “field of vision” of 25ft in front of the light and about 120-degree detection angle at a surrounding air temperature of 77F.
2. The motion sensor will have a first-time use warm-up time of about 60 seconds. Please wait a minimum of 60 seconds after the first power-on before testing the motion sensor.
3. When testing the motion sensor performance during the daytime the solar panel will need to be covered to override the Dusk to Dawn functionality of the light fixture. Cover the solar panel fully using a piece of cardboard and tape for first time testing.

LED BATTERY INDICATOR GUIDE

FIXTURE STATUS| RED LED| GREEN LED| FIXTURE LED
Charging in progress (battery from 10% to 90%)| OFF| Blinking| OFF
Charging completed (Battery > 90%)| OFF| ON| Remains in the same state
Discharging in progress (battery from 90% to 10%)| OFF| OFF| Remains in the same state
Battery low (<10%)| ON| OFF| Remains in the same state
Motion mode selected| Remains in the same state| Remains in the same state| Blinks once when mode selected
D2D mode selected| Remains in the same state| Remains in the same state| Blinks 2 times when mode selected
Motion + D2D Modeselected| Remains in the same state| Remains in the same state| Blinks 3 times when mode is selected

INSTALLATION

1. When selecting the mounting location for this light fixture the most important thing to remember for the operation to work properly is that it works from the power received from direct sunlight. The solar panel works best when placed on the southern-facing portion, or the highest point, of a structure. The more direct sunlight the solar panel receives in a day, the longer the light will operate. Make sure there is a minimum amount of obstructions between the solar panel and the sun.
2. Mount at a maximum of 15ft high for best results.

WALL MOUNT

1. Drill 3 holes on the chosen mounting surface using the fixture arm as the template or the scale diagram. Fig (1)
2. Use the 3 included mounting lag screw (AA) with 3 washers (BB) to secure the fixture into pre-drilled pilot holes. Ensure fixture is securely fixed to the wall. Fig (2)

POLE (TENON) MOUNT

1. Remove the pole mounting screw from the bottom of the fixture arm as pictured in Fig (3)
2. Slide the fixture onto the tenon pole (sold separately). Fig (4)
3. Using the screw you removed in an early step, re-attach in the same hole and tighten until the fixture is secured to the pole.

CONFIGURING AND TESTING SOLAR AREA LIGHT WITH THE REMOTE CONTROL

1. Remote comes with AAA batteries included.
2. When selecting a mode of operation for this light fixture with the included remote control, the fixture will continue to operate in the selected mode day after day. You don’t need to use the remote after configuring the light fixture to your desired settings. Only if making a change to the settings will the remote be required.

REMOTE CONTROL RANGE:
Max 15ft distance with clear line of sight to the light fixture.

• ON – Manual Fixture on 100%
• OFF – Manual Fixture Off 0%

MODES OF OPERATION CONFIGURATION

• MOTION mode – (Light Blinks Once when selected on remote) – This is the factory default mode. After sundown, the fixture will turn on to 100% light output when motion is detected. It will remain on for 30/60/90 seconds as per the below motion sensor time-out setting selected by the user. After the time out has elapsed and no-motion detected the fixture will turn OFF. .
• DTD mode – (Light Blinks Twice when selected on remote) – After sundown, the fixture will turn on for 12 hours of light at 10% of the rated maximum lumen output of the fixture.
• MOTION+DTD mode – (Light Blinks three times when selected on remote) – After sundown the fixture will turn on continuously at an ambient 8% lumen output and when motion detected the light intensity will increase to 30% rated output and remains on for 30/60/90 seconds as per the below motion sensor time out setting. After the time out setting and no-motion detected the fixture will revert back to the ambient lumen ouput level.

MOTION SENSOR TIME OUT CONFIGURATION

• 30s – Applies to Motion and Motion &D2D Mode only.
  30s auto time out delay after no-motion detected fixture goes to 100% OFF

• 60s – Applies to Motion and Motion &D2D Mode only.
  60s auto time out delay after no-motion detected fixture goes to 100% OFF

• 90s – Applies to Motion and Motion &D2D Mode only.
  90s auto time out delay after no-motion detected fixture goes to 100% OFF

CARE AND CLEANING

• To prolong the original appearance, clean the light fixture with clean water and a soft, damp cloth only.
• Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents or any other chemicals on this light fixture. They could cause a premature deterioration of the finish and may void the warranty.
• Do not spray the light fixture with a hose or power washer.

BATTERY MAINTENANCE

• This fixture comes with rechargeable batteries pre-installed and fully sealed inside the fixture.
• These batteries are not meant to be replaced.

TROUBLESHOOTING

reposition the unit away from the light source.
Fixture is not charging during the day.|

• Solar panel must be receiving direct sunlight to charge during day (reposition if shadowed).
• Solar panel must be clean and free from debris.
• Make sure batteries have been charged for 2 full days of sunlight prior to turning the fixure ON.
• When battery is low, the fixture will automatically turn OFF until the battery is charged to the operating level.

Light comes on for no apparent reason at night| There is motion in the detection zone.|

• Make sure the sensor is not picking up moving objects such as trees, traffic, etc.
• TEST FOR YOURSELF. Cover the sensor lens with black electrical tape to prevent sensor from detecting motion. If the light stays off, something in the detection zone is triggering the sensor.
• Reposition the fixture.
• If the light stays on with the sensor lens covered, contact customer service.

Light stays on at night and does not turn off| There is motion in the detection zone.|

• Make sure the sensor is not picking up moving objects such as trees, traffic, etc.
• Reposition light fixture.
• If the light continues to stay on, contact customer service.

1-YEAR LIMITED WARRANTY

• THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
• Cooper Lighting Solutions warrants to customers that, for a period of one year from the date of purchase, Cooper Lighting Solutions products will be free from defects in materials and workmanship. The obligation of Cooper Lighting Solutions under this warranty is expressly limited to the provision of replacement products. This warranty is extended only to the original purchaser of the product. A purchaser’s receipt or other proof of date of original purchase acceptable to Cooper Lighting Solutions is required before warranty performance shall be rendered.This warranty does not apply to Cooper Lighting Solutions products that have been altered or repaired, that have been subjected to neglect, abuse, misuse or accident (including shipping damages). This warranty does not apply to products not manufactured by Cooper Lighting Solutions which have been supplied, installed, and/or used in conjunction with Cooper Lighting Solutions products. Damage to the product caused by replacement bulbs or corrosion or discoloration of brass components are not covered by this warranty.
• LIMITATION OF LIABILITY: IN NO EVENT SHALL COOPER LIGHTING SOLUTIONS BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS; NOR SHALL THE LIABILITY OF COOPER LIGHTING SOLU-TIONS FOR ANY CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF COOPER LIGHTING PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS THEREFORE, EXCEED THE PURCHASE PRICE OF COOPER LIGHTING SOLUTIONS PRODUCTS GIVING RISE TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR INSTALL FIXTURES.
• To obtain warranty service, please contact Cooper Lighting Solutions at 1-800-334-6871 or via e-mail ConsumerProducts@Cooperlighting.com and include the following information:
  • Name, address and telephone number
  • Date and place of purchase
  • Catalog and quantity purchase
  • Detailed description of problem
• All returned products must be accompanied by a Return Goods Authorization Number issued by the Company and must be returned freight prepaid. Any product received without a Return Goods Authorization Number from the Company will be refused. Cooper Lighting Solutions is not responsible for merchandise damaged in transit. Repaired or replaced products shall be subject to the terms of this warranty and are inspected when packed. Evident or concealed damage that is made in transit should be reported at once to the carrier making the delivery and a claim filed with them.
• Reproductions of this document without prior written approval of Cooper Lighting Solutions are strictly prohibited.
• For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@Cooperlighting.com
• Printed in China

Solar LED Dusk to Dawn & Motion Activated Area Light Instructions www.cooperlighting.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>