HORMANN 2087633 B0-17-2023-DX Garden Box Instruction Manual

: June 12, 2024
: HORMANN

HORMANN 2087633 B0-17-2023-DX Garden Box

HORMANN 2087633 B0-17-2023-DX Garden Box

About These Instructions

These instructions are divided into a text section and an illustrated section. The illustrated section can be found after the text section.

Enter the serial number (see data label on the inside of the cover), key number of your product.

All specified dimensions in the illustrated section are in mm.

Symbols used

Important note for avoiding personal injury
Important note for avoiding damage to property
Correct arrangement or activity
Non-permissible arrangement or activity
See text section
See illustrated section
Check
Use a lot of force
Do not use force
Unlocked
Locked

Warnings used

The general warning symbol indicates a danger that can lead to injury or death. In the text, the general warning symbol will be used in connection with the caution levels described below. In the illustrated section, an additional instruction refers back to the explanation in the text section.

CAUTION
Indicates a danger that can lead to minor or moderate injuries.

ATTENTION
Indicates a danger that can lead to damage or destruction of the product.

Dissemination as well as duplication of this document and the use and communication of its content are prohibited unless explicitly permitted. Noncompliance will result in damage compensation obligations. All rights reserved in the event of patent, utility model or design model registration. Subject to changes.

Safety Instructions

CAUTION
Risk of injury in the event of non-observance of these instructions for use .
These instructions contain important information on the safe use of the product. Possible dangers are emphasised.

Read through all of the instructions carefully.
Follow all safety instructions provided in this document.
Keep these instructions accessible.

Intended use

The product described is a garden box for private use.
The product is intended for storage of, for example, cushions, coatings, padding and objects for leisure purposes.
The product must not be used for the following purposes:

For storing hazardous materials
For accommodating people or animals
As a seat
As shelving

General safety instructions

In the following cases, the manufacturer accepts no liability for damage or injury:

Non-observance of these instructions
Non-intended use of the product
Improper fitting and handling of the product
Use of parts or spare parts that are not manufactured or approved by the manufacturer
Damage to the product or individual components
Unauthorised modifications or alterations of the product
Keep all the small parts provided away from young children.
Choking hazard when swallowed
Keep the packaging material out of reach of children
The base is designed for a maximum distributed load of 75 kg / m2

Product Description

The product is available in two sizes:

Symbol	Size (W × D × H)	Scope of delivery
1360 mm × 674 mm ×
724 mm

▶ 3 .1

| 1660 mm × 874 mm ×
724 mm|

▶ 3 .2

Fitting

Safety instructions for fitting

CAUTION
Danger of injury in the event of nonobservance of these fitting instructions .
This section contains important information on the safe fitting of the product.

Before starting fitting work, carefully read through this section.
Follow all safety instructions.
Perform the fitting as described.
Ensure that the following conditions are met when performing fitting work:
– The working area is cordoned off.
– Large and bulky parts are only moved by two people.
– All parts are undamaged and in flawless condition.
To prevent injuries due to sharp-edged objects and falling parts:
Wear protective gloves while carrying out fitting work.
Do not fit the product in windy conditions. Fitting under wind exposure may be dangerous.

Preparing for fitting

Familiarise yourself with the fitting situation and the related documents.
Gather the required tools.

Requirements for the fitting site

The product may only be fitted if the requirements for the fitting site are fulfilled.

Ensure that the subsurface is level and clean.
Make sure there is sufficient water run-off in the area of the base.

ATTENTION
Danger of material damage due to scratches .
The surfaces of the individual elements may be damaged if carelessly placed on rough ground.

After unpacking and during fitting, store the individual elements on a smooth surface.

Use

Safety instructions for use

CAUTION
Danger of injury in the event of nonobservance of these instructions for use .
This section contains important information on the safe use of the product.

Before using, carefully read through this section.
Follow all safety instructions.
Do not sit or stand on the product cover. The cover is not designed for loads of this type.
Do not sit or stand in the product. The base of the product is not designed for loads of this type.
Make sure that children do not climb inside the product and close the cover.
Do not place objects on the cover. This can scratch the surface.
Protect the product from aggressive and caustic substances, such as:
– Acids
– Alkaline solutions
– Road salt
– Fertilisers
– Other chemical substances
Do not store heat-sensitive materials in the product.
The inside can reach very high temperatures in summer.
Keep the product free from ice and snow in winter.

Maintenance

Locking cylinders

ATTENTION
Danger of damage due to improper maintenance .
Unsuitable lubricants may cause damage and impair function.

Only use specialised lubricants for locking cylinders.
Do not use oil or graphite.
Lubricate the locking cylinder at least once a year with a suitable lubricant.

Hinges

Oil the hinges on the cover at least once a year with a commercially available lubrication oil.

Cleaning and Care

Surfaces

Clean the surfaces with clear water and a soft sponge or with conventional paint cleaners.
Remove leaves and other dirt from the product at regular intervals.

Dismantling and Disposal

Dismantle the product in accordance with these fitting instructions in the logically correct reverse order.
Be sure to dispose of the product correctly in accordance with the requirements in your country.