HORMANN 700085 Roller Garage Door RollMatic Instruction Manual
- October 30, 2023
- HORMANN
Table of Contents
- HORMANN 700085 Roller Garage Door RollMatic
- Product Information
- Product Usage Instructions
- Roller garage door RollMatic
- Fitting types
- Chamfered bottom profile
- Fixing Points Internal Roller Garage Door
- Fixed element
- Connections for Control and Emergency Release
- Roller garage door RollMatic T
- Fitting types
- Fixing Points Internal Roller Garage Door
- Control connections
- Garage horizontal door RollMatic OD
- Fitting types
- Vertical track fastening and distance back
- Side doors NT 60
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HORMANN 700085 Roller Garage Door RollMatic
Product Information
The user manual provides information about the fitting data status of various roller garage doors including RollMatic, RollMatic IR/AR, RollMatic T, and Overhead Door RollMatic OD. Themanual includes details about the size range, fitting types, fixing points, electrical connections, and door leaf equipment and fittings of these garage doors. The manual also provides information about the required finished floor level and required headroom for installation.
Product Usage Instructions
- Before fitting the garage doors, the door opening and garagefloor must be finished. The fitting types for the Roller Garage Door RollMatic include fitting behind the opening with operator and chain hoist interior left or fitting behind the lintel. For the Roller Garage Door RollMatic fitted behind the opening, there are two types of fittings possible – one with EBT = S (290 or 335) and another with EBT = SBH (290 or 335) with an additional fascia panel required. For the Roller Garage Door RollMatic T, fitting types include those separated by FS 75 and FS 105. For the Overhead Door RollMatic OD, fitting types include vertical track fastening and distance back.
- The user manual provides detailed information about the ordering size width, ordering size height, clear width, clear height, clear passage height, and required headroom for installation. The manual also includes drilling diameters for guide rails without fitting holes and electrical connections for certain models.
Roller garage door RollMatic
Internal (IR) and external roller garage door (AR)
External views
Notes:
Manually operated version only possible with internal roller garage door
Size range
Fitting types
Roller garage door RollMatic, internal roller garage door
Fitting behind the opening
| Version with operator RollMatic | Manually operated version | |
|---|---|---|
| * Clear passage height (LDH) | LH – 100 | LH – 125 |
Fitting behind the lintel
Distance to guide rails
Fitting in the opening with additional fascia panel
| Version with operator RollMatic | Manually operated version | |
|---|---|---|
| * Clear passage height (LDH) | LH – 100 | LH – 125 |
Fitting behind the lintel
Fitting in front of the opening
Notes:
Operator as standard on left when viewed from outside, optionally operator on
right
- Distance from fascia panel / guide rail ≥ 5 mm
- For a visually balanced look the curtain cover can be ordered symmetrically!
Distance to guide rails
Chamfered bottom profile
Roller garage door RollMatic
View of fitting side
- For internal roller garage door, from inside
- For external roller garage door, from outside
* **LH** = (Clear height on short side) = ordering size height (BMH)
* Max. LH = 3100 mm
* Min. LH = 1600 mm
* H = Height difference ≤ 300 mm Notes:
Chamfered bottom profile only for doors with operator
Fixing Points Internal Roller Garage Door
Roller garage door RollMatic
Fitting behind the opening
Fitting in the opening with additional fascia panel
Fitting in front of the opening
Fixed element
Roller garage door RollMatic
Fitting behind or in the opening
Connections for Control and Emergency Release
Roller garage door RollMatic
Roller garage door RollMatic T
Internal (IR) and external roller garage door (AR)
External views
Size range
Fitting types
Roller garage door RollMatic T, internal roller garage door
Fitting behind the opening
| FS 75 | FS 105 | |
|---|---|---|
| * Clear passage height (LDH) | LH – 70 | LH – 110 |
Fitting behind the lintel
Distance to guide rails
Fitting in the opening with additional fascia panel
Notes:
An additional fascia panel is required!
| FS 75 | FS 105 | |
|---|---|---|
| * Clear passage height (LDH) | LH – 70 | LH – 110 |
Fitting behind the lintel
Fitting in front of the opening
Notes:
Operator as standard on left when viewed from outside. Operator on right
optionally available.
| FS 75 | FS 105 | |
|---|---|---|
| * Clear passage height (LDH) | LH – 70 | LH – 110 |
Distance to guide rails
Fixing Points Internal Roller Garage Door
Roller garage door RollMatic T
Fitting behind the opening
Fitting in the opening with additional fascia panel
Fitting in front of the opening
Control connections
Roller garage door RollMatic T
Garage horizontal door RollMatic OD
External views
Size range
Fitting types
Garage horizontal door RollMatic OD
Fitting behind the opening
Distance to guide rails
Fitting in the opening
Fitting in the opening, flush-fitting with fascia frame 95
Fitting behind the opening
Fitting in the opening
Fitting in the opening, flush-fitting with fascia frame 95
Vertical track fastening and distance back
Garage horizontal door RollMatic OD
Fixing variants
Side doors NT 60
With corner frame made of aluminium profiles
Profile type 4
External views
Size range
Ordering size = BRB × BRH
Width × height| DRH from FFL
From 875 × 1800
up to 1284 × 2500
| 1050
Internal fitting opening inwards
External fitting opening outwards
Optimal position of anchors
With block frame made of aluminium profiles
Profile type 4
External views
Size range
Ordering sizes = RAM
Width × height| DRH from FFL
From 855 × 1800
up to 1330 × 2558
| 1050
Fitting behind the opening / opening inwards
Fitting in the opening, opening inwards
Fitting in the opening, opening outwards
Optimal position of anchors
Brand quality for residential and commercial construction
The family-owned company Hörmann offers all important construction components
for building and renovating projects from a single source. We manufacture in
highly-specialised factories using the latest production technologies.
Furthermore, our employees work intensively on new products, continual further
developments and improvements to details. The results are patents and one-
of-a-kind products you can depend on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>