HORMANN Receiver HEI 3 BiSecur Instruction Manual

Receiver HEI 3 BiSecur
Instruction Manual

Dissemination as well as duplication of this document and the use and communication of its content are prohibited unless explicitly permitted. Noncompliance will result in damage compensation obligations.
All rights reserved in the event of patent, utility model or design model registration. Subject to changes.
Dear Customer,
We thank you for choosing a quality product from our company.

About These Instructions

Read through all of the instructions carefully, as they contain important information about the product. Pay attention to and follow the instructions provided, particularly the safety instructions and warnings.
Further information about handling radio components can be found on the Internet. Please keep these instructions in a safe place and make sure that they are available to all users at all times.

Safety Instructions

2 .1 Intended use
The HEI 3 BiSecur receiver is a unidirectional receiver for the actuation of operators and controls. It has three channels and is operated via the BiSecur radio. The third channel is only active/functional in combination with special operator models.
Other types of application are prohibited. The manufacturer is not liable for damage caused by improper use or incorrect operation.
2 .2 Safety instructions for operating the receiver
CAUTION
Danger of injuries due to unintended door travel
▶ See warning in section 7
ATTENTION
Functional impairment due to environmental influences
Non-compliance with these instructions can impair function!
Protect the receiver from the following conditions:

• Direct sunlight (permissible ambient temperature: -20°C to +60°C)
• Moisture
• Dust

NOTES:

• If there is no separate garage entrance, perform all programming changes and extensions of radio systems while standing in the garage.
• After programming or extending the radio system, check the functions.
• Only use original components when putting the radio system into service or extending it.
• Local conditions may affect the useful range of the radio system!
• When used at the same time, GSM 900 mobile phones can affect the range.

Scope of delivery

• Receiver HEI 3 BiSecur
• Fixing material
• Receiver holder
• Operating instructions

Description of the receiver

HEI 3 BiSecur

1. Receivers
2. LED, blue
3. Programming button P (P button)
4. Connecting lead, 7.0 m
5. Receiver holder
6. Fitting screw

4 .1 LED display
Blue (BU)

the learning
Flashes slowly for 5 seconds
Flashes quickly for 2 seconds| Device reset is being implemented or completed
Off| Operation mode

Fitting

NOTE:
By selecting an appropriate fitting location, the range can be optimises. The best alignment to achieve an optimum range must be established by trial and error.

Connection

Teaching in a radio code

CAUTION
Danger of injuries due to unintended door travel
Unintended door travel may occur while teaching in the radio code.
▶ Pay attention that no persons or objects are in the door’s area of travel when teaching in the radio code.
A maximum of 300 radio codes can be taught in the receiver. They can be distributed over the existing channels. If the same radio code is taught in on two different channels, it will be deleted on the first taught-in channel.
In learn mode, the channels of the receiver can be switched by pushing the P button, as long as no radio code has been recognized.
To activate / switch a channel:
▶ Press the P button once, to activate channel 1.
▶ Press the P button twice, to activate channel 2.
▶ Press the P button 3 times, to activate channel 3.
To abort the learn mode:
▶ Press the P button 4 times, or wait for the timeout.
Timeout
If no valid radio code is recognized within 25 seconds, the receiver automatically returns to the operation mode.
7 .1 Teaching in a radio code

1. Press the P button to activate the desired channel.
   – The LED will flash slowly in blue for channel 1.
   – The LED will flash blue twice for channel 2.
   – The LED will flash blue three times for channel 3.

2. Put the hand transmitter , whose radio code is to be inherited, into the Inheriting / Transmitting mode.
   If a valid radio code is recognised, the LED flashes quickly in blue for then goes out.
   The receiver is in the operation mode.

Operation

In the operation mode, the receiver signals the recognition of a valid radio code by illuminating the LED.
NOTE:
If the radio code for the taught-in hand transmitter was copied from another hand transmitter, the hand transmitter button must be pressed a second time during initial start-up.
A valid radio code channel 1 is discovered = The LED is illuminated briefly once
A valid radio code channel 2 is discovered = The LED is illuminated briefly twice
A valid radio code channel 3 is discovered = The LED is illuminated briefly 3 times

Reset

All radio codes are deleted by the following steps:

1. Press and hold the P button.
   – The LED slowly flashes in blue for 5 seconds.
   – The LED flashes rapidly in blue for 2 seconds.

2. Release the P button.
   All radio codes have been deleted .

NOTE:
If the P button is released prematurely, the device reset will be aborted and the radio codes are not deleted.

Disposal

recycling facilities.
****| Dispose of the batteries separately. Each consumer is legally required to leave batteries with a collection point in their community, their district, or with a trader.

Technical data

HEI 3 BiSecur receiver

EU and UK Declaration of Conformity

Hörmann KG Verkaufsgesellschaft and Hörmann UK Ltd. herewith declares that the radio equipment type HEI 3 BiSecur receiver complies with the EU Directive 2014/53/EU and the UK Regulations 2017 No. 1206.
The complete text of the EU Declaration of Conformity and of the UK Declaration of Conformity can be found on the following website:

http://www .hoermann-docs.com/279225

Hörmann KG Verkaufsgesellschaft
Upheider Weg 94-98
33803 Steinhagen
Deutschland 4581527 B3 / 09-2023 / RE

References

• hoermann-docs.com/279225

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>