RIGID 360-Series Amber White SAE Fog Lights Installation Guide
- June 12, 2024
- RIGID
Table of Contents
RIGID 360-Series Amber White SAE Fog Lights
PRODUCTS INCLUDE
- (2) Amber White Lights (360 or D-Series)
- Mounting hardware
IMPORTANT
THANK YOU FOR PURCHASING RIGID INDUSTRIES’ PRODUCTS FOR YOUR VEHICLE.
Please read through all of these Instructions and tips before proceeding with
the installation. We do our best to provide a simple installation process for
all applications however a professional installation is always recommended.
Always disconnect any power sources connected to your vehicle before servicing fuses or electrical systems.
WIRING LEADS
- RED WIRE = WHITE PROJECTING TRIGGER
- BLACK WIRE = GROUND
- WHITE WIRE = AMBER PROJECTING TRIGGER
INSTALLATION INSTRUCTIONS
MOUNT INSTRUCTIONS & DIAGRAM FOR
360-SERIES
| A | M8x25mm Carriage Bolt | Place through bracket |
|---|---|---|
| B | M8 Flat Washer | Place on carriage bolt |
| C | M8 Lock Washer | Place on carriage bolt |
| D | M8 Nut | Tighten light to bracket |
| E | M6 Ny Lock Nut | Place in Heatsink |
| F | Mounting Bushing | Slide into Heatsink |
| G | 6-32x.375” Socket Head | Tighten mount bushing to Heatsink |
| H | M6 Flat Washer | Place on item I prior to install |
| I | M6x22mm Socket Head | Tighten the bracket to the light (Torque 32in-lbs) |
D-SERIES
| A | LED Light (Housing) | Place through bracket |
|---|---|---|
| B | M6 Allen Socket Head (2) | Place through light and bracket |
| C | M6 Nyloc Nut (2) | Tighten to M6 Allen bolt |
| *D | Mounting Bracket | Place into light housing |
| E | 5/16”- 18 Carriage Bolt | Place through bracket (bottom) |
| F | 5/16” Carriage Washer | Place on carriage bolt (first) |
| G | 5/16” Carriage Lock Washer | Place on carriage bolt (second) |
| H | 5/16”- 18 Carriage Nut | Tighten to 5/16”-18 carriage bolt |
- Bracket can be reversed for additional mounting configurations
Wiring: Wire your lights according to the instructions included with the light. Take care to avoid any heat sources and sharp or abrasive surfaces.
Your installation is now complete.
Welcome to the Rigid Nation!
WARRANTY INFORMATION
For warranty information, visit www.rigidindustries.com/about/warranty 779 N
Colorado St, Gilbert, AZ 85233 •
855-760-5337 |
www.rigidindustries.com
RIGID, 360-Series, D-Series and Rigid Industries are registered and/or common
law marks owned by JST Performance, LLC, a Delaware limited liability company
d/b/a Rigid Industries.
11-14014-A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>