RIGID 11-14108-A Bronco Triple Fog Mount Kit Installation Guide
- June 13, 2024
- RIGID
Table of Contents
RIGID 11-14108-A Bronco Triple Fog Mount Kit
Product Information
- The product is the 2021+ Ford Bronco Triple Fog Mount Kit by Rigid Industries. The kit includes (2) Mount #46730. Please note that lights are sold separately. The recommended tool for installation is a T40 Torx Bit.
- Rigid Industries is the manufacturer of this product. They provide a simple installation process for all applications, but professional installation is always recommended.
- It is important to always disconnect any power sources connected to your vehicle before servicing fuses or electrical systems.
- The product comes with a warranty. RIGID, SR-M Series, and Rigid Industries are registered and/or common law marks owned by JST Performance, LLC, a Delaware limited liability company d/b/a Rigid Industries.
Product Usage Instructions
- Step 1: Assemble the standard surface mounting brackets to the SR-M pod lights. Make sure to use the passenger bracket as shown. The brackets are labeled P for the passenger side and D for the driver side. The main mounting brackets have slotted tabs for height adjustment.
- Step 2: Remove the (3) existing factory bolts per side using a T40 Torx. Re-use these bolts to install the new RIGID bracket. It is recommended to apply blue thread locker when re-installing the factory bolts.
- Step 3: Use the supplied wiring harness to supply a power source to the lights. Wire your lights according to the instructions included with the light. Take care to avoid any heat sources and sharp or abrasive surfaces.
- Your installation is now complete. Enjoy your Rigid Industries’ product!
PRODUCT INCLUDES
- (2) Mount #46730
- Lights sold separately
RECOMMENDED TOOLS
T40 Torx Bit
THANK YOU FOR PURCHASING RIGID INDUSTRIES’ PRODUCTS FOR YOUR VEHICLE.
Please read through all of these Instructions and tips before proceeding with the installation. We do our best to provide a simple installation process for all applications however a professional installation is always recommended.
IMPORTANT
Always disconnect any power sources connected to your vehicle before servicing
fuses or electrical systems.
INSTALLATION INSTRUCTIONS
- STEP: 1
Assemble the standard surface mounting brackets to the SR-M pod lights.
Note: Passenger bracket as shown. Brackets are labeled P for passenger side and D for driver side.
The main mounting brackets tabs are slotted for height adjustment as shown in the second picture.
-
STEP: 2
Remove the (3) existing factory bolts per a side with a T40 Torx. Re-use these bolts to install the new RIGID bracket. It is recommended to apply blue thread locker when re-installing the factory bolts. -
STEP: 3
Use the supplied wiring harness to supply a power source to the lights.
Wiring: Wire your lights according to the instructions included with the
light. Take care to avoid any heat sources and sharp or abrasive surfaces.
Your installation is now complete.
Welcome to the Rigid Nation!
WARRANTY INFORMATION
For warranty information, visit www.rigidindustries.com/about/warranty 779 N
Colorado St, Gilbert, AZ 85233 •
855-760-5337
www.rigidindustries.com
RIGID, SR-M Series, and Rigid Industries are registered and/or common law
marks owned by JST
Performance, LLC, a Delaware limited liability company d/b/a Rigid Industries.
11-14108-A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>