Growee Smart pH Balancer User Guide

June 12, 2024
Growee

pH Balancer Growee Smart pH BalancerQuick Start Guide

What’s In The Box

Add more Nutrient Doser units and create your own talored feeding solution automation Growee Smart pH Balancer - Fig

Set Up Your pH Balancer

Step 1: Disconnect the Hydro Master from the power supply Step 2: Install the pH Balancer on the wall
A. Place the pH Balancer on the left side of the Hydro Master or the Nutrient Doser, if already installed, at a maximum distance of 3.5 inches.
B. Use a 4/7 mm irrigation pipe for the pumps. The tube length must not exceed 23 inches.
C. Make sure the ends of the tubes can reach the tank and are well above the water level at all times. Avoid all contact between the tubes and the water in the tank.Growee Smart pH Balancer - Balancer 1 Step 3: Connect the pH Balancer to the Hydro Master
Important notice:
Before connecting the pH Balancer ensure that the Hydro Master is disconnected from the power source
A. Use the connecting cable to connect the pH Balancer to the Growee Hydro Master or Nutrient Doser, if already installed.Growee Smart pH Balancer -
Balancer 3B. Connect the Hydro Master to the power supply and wait until the
Growee Hydro Master indicator light is solid green.
It should take up to 1 minute.Growee Smart pH Balancer - Balancer
2 Step 4: Connect tubes to the pH Balancer pumps
Important notice:

  • The pump marked + is designated for the pH up solution.
  • The pump marked – is designated for the pH down solution.

A. Connect the pump fittings marked with to your preferred pH solution.Growee Smart pH Balancer - Balancer 4B. Connect the pump fittings marked with to the water tank. Make sure the ends of the tubes are above the tank water at all times. Avoid all contact between the tubes and the water in the tank.Growee Smart pH Balancer - Balancer
5 Step 5: Balance the pH level using the app
A. Go to www.MyGrowee.com or to your smartphone app and log in with your username and password.
B. On the main Dashboard, press on the “pH level” button.Growee Smart pH
Balancer - AppC. Choose the desired pH range and press start D. The pH Balancer will maintain the pH level within the defined range.

For support and instructional videos, visit our website:
www.GetGrowee.com
If you still need help, don’t hesitate to contact us at
Contact@GetGrowee.com 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals