elgato Wave Panels Starter Set User Guide
- June 4, 2024
- elgato
Table of Contents
elgato Wave Panels Starter Set
Contents
Assemble EasyClick frames
Mount on smooth wall
Clean frame surface with rubbing alcohol or silicone-free glass cleaner before applying tesa” adhesive strips. Clean wal surface with a dust-free cloth. Attach white side of self-adhesive strips to EasyClick frames, blue side must point towards the wall. tesa adhesive strips are not suitable for use on vinyl wallpapers, anti-stick surfaces and porous materials such as styrofoam, fabric, etc. For removing, hold EasyClick frame frmly without pressing and puill tesa adhesive strips downwards approx. 25 cm in parallel to the wall
Mount on textured wall
- Mount a panel with a single screw and let it hang in place.
- Use a spirit or laser level for accurate orientation.
- Appropriate mounting materials must be selected according to wall conditions.
Connect EasyClick frames
Use a combination of tesa” adhesive strips, clips, and a few screws to achieve maximum stability with minimal drilling.
Apply acoustic foam
- Be especially careful when setting up near children (small parts pose chocking hazard).
- Do not attach items to the panels
- Do not leave panels exposed to direct sunlight.
- Do not set up in areas susceptible to strong air currents.
- Only mount on straight walls. Do not mount panels on ceilings.
Get creative and enjoy!
Read User Manual Online (PDF format)
Loading......