COOPER Lighting Solutions RCQK-RC3DE-CONF Room Controller QuicKit Owner’s Manual

: June 12, 2024
: COOPER Lighting Solutions

Table of Contents

COOPER Lighting Solutions RCQK-RC3DE-CONF Room Controller QuicKit
Top Product Features
Dimensional Details
Room Controller QuicKit
Product Specifications
- Electrical
Overview
Operation
Installation
Wiring Diagrams
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COOPER Lighting Solutions RCQK-RC3DE-CONF Room Controller QuicKit

Product Information
The Room Controller QuicKit is a versatile all-in-one package solution designed to provide complete control over various aspects of a room. It includes a range of components such as room controllers, dimming switches, occupancy sensors, and more. The QuicKit is available in different configurations to suit different needs, including options that comply with the Buy American Act (BAA) requirements.

Top Product Features

All-in-one package solution
Multiple configuration options
Compliant with Buy American Act (BAA) requirements (select configurations)
Includes room controllers, dimming switches, occupancy sensors, and more
User-friendly interactive menu
Product certification
Dimensional details and additional product diagrams available
Five-year standard warranty

Product Specifications

Mechanical Size: 14″ W x 8 1/2″ H x 11″ D (355.6mm x 215.9mm x 279.4mm)
Electrical Input Requirements: Standard 2mA each
Emergency Output (RC3DE/RC3DEHC only): UL 924

Order Information
To order a Room Controller QuicKit, refer to the catalog number associated with your desired configuration. The included components vary depending on the chosen configuration.

Catalog Number: RCQK-RC3DE-CONF

Included Components:

Room controller – Dimming, emergency relay, plenum rated
20A receptacle switchpack
Daylight sensor/infrared receiver
Corner/Wall mounted dual tech occupancy sensor
Input/Output device
Quick connect cables (10 ft., 6 inch, and 25 ft. plenum rated)
6 button Preset Wall station
6 button 3-zone dimming wall station
Handheld personal remote

Note: This is just one example configuration. Refer to the Room Controller page on our website for more information on other available configurations.

Please note that some configurations are built to be compliant with the Buy American Act of 1933 (BAA). Refer to the DOMESTIC PREFERENCES website for more information.

Greengate
Room Controller QuicKit

The Room Controller QuicKits provide a complete, all-in-one package solution

Typical Applications

Office • Education • Healthcare • Hospitality

Interactive Menu

Order Information page 2
Additional Resources page 3
Wiring Diagrams page 4
Product Warranty

Product Certification
Product Features

Top Product Features

Easy to order, QuicKits are designed and packaged for immediate in-room installation.
The Room Controller includes three relays and up to three 0-10 VDC dimming outputs to control compatible dimmable ballasts. The switching relays and 0-10 VDC outputs are controlled separately, allowing flexibility in wiring and control.
The Room Controller is shipped preconfigured to work out-of-the-box when connected to Room Controller devices, allowing quick and easy daylighting controls, occupancy/vacancy sensing and manual switching.
Packages for Conference Rooms, Offices, Classrooms, and Healthcare
Click & Go ready, RJ45 connections
Preconfigured for automatic functionality upon power-up
Manual or Automatic On, bi-level, tri-level and dimming control strategies
Integral Demand Response input with four levels of preconfigured energy reduction
Built in tubular lighting control with preconfigured wallstation controls
Integral pillow speaker connections for GPCS (RC3DEHC)
Integral Solatube® connection for classrooms
Guaranteed compatibility with Cooper Lighting Solutions LED and 0-10V fluorescent fixtures
Ladderless UL 924 Emergency Mode testing (RC3DE & RC3DEHC)
Options to meet Buy American Act requirements

Dimensional Details

Room Controller QuicKit

Order Information

Catalog Number

	Catalog Number	Included Components	Description

[Blank] =Standard

BAA = Buy American Act

| RCQK-RC3DE-CONF| RC3DE-PL (QTY1)| Room controller – Dimming, emergency relay, plenum rated
SPRC-R-20-120 (QTY1)| 20A receptacle switchpack
DSRC-FMOIR (QTY1)| Daylight sensor/infrared receiver
OAWC-DT-120W (QTY1)| Corner/Wall mounted dual tech occupancy sensor
OCC-RJ45 (QTY1)| Input/Output device
GGRJ45-10P-G (QTY1)| Quickconnect cable 10 ft. plenum rated
GGRJ45-006-G (QTY1)| Quickconnect cable 6 inch
GGRJ45-25P-G (QTY3)| Quickconnect cable 25 ft. plenum rated
RC-6TSB-P2 (QTY1)| 6 button Preset Wallstation
RC-6TSB-ZAD (QTY1)| 6 button 3-zone dimming wallstation
HHPR-RC (QTY1)| Handheld personal remote
RCQK-RC3D-OFFICE| RC3D-PL (QTY1)| Room controller – Dimming, plenum rated
SPRC-R-20-120 (QTY1)| 20A receptacle switchpack
OAC-DT-2000-R (QTY1)| Ceiling mounted dual tech occpancy sensor
DSRC-FMOIR (QTY1)| Daylight sensor/infrared receiver
OCC-RJ45 (QTY1)| Input/Output device
GGRJ45-10P-G (QTY1)| Quickconnect cable 10 ft. plenum rated
GGRJ45-25P-G (QTY3)| Quickconnect cable 25 ft. plenum rated
RC-5TSB-OS2 (QTY1)| 5 button Preset Wallstation
RCQK-RC3DE-CLASS| RC3DE-PL (QTY1)| Room controller – Dimming, emergency relay, plenum rated
SPRC-R-20-120 (QTY1)| 20A receptacle switchpack
DSRC-FMOIR (QTY1)| Daylight sensor/infrared receiver
OAC-DT-2000 (QTY1)| Ceiling mounted dual tech occpancy sensor
OCC-RJ45 (QTY1)| Input/Output device
GGRJ45-10P-G (QTY1)| Quickconnect cable 10 ft. plenum rated
GGRJ45-25P-G (QTY4| Quickconnect cable 25 ft. plenum rated
RC-4TSB-TS5 (QTY1)| 4 button Preset Wallstation
RC-6TSB-TS4 (QTY1)| 6 button Preset Wallstation
RCQK-RC3DEHC| RC3DEHC-PL (QTY1)| Room controller – Dimming, emergency relay, healthcare, plenum rated
OCC-RJ45 (QTY1)| Input/Output device
DSRC-FMOIR (QTY1)| Daylight sensor/infrared receiver
GGRJ45-25P-G (QTY4)| Quickconnect cable 25 ft. plenum rated
GG37P (QTY1)| 37 pin receptacle
GPCS-3Z-DIM (QTY1)| Patient control station 3 zone raise/lower
RC-6TSB-HC2 (QTY1)| 6 button Preset Wallstation
RC-4TSB-HC1 (QTY1)| 4 button Preset Wallstation
Note

(1) Only product configurations with this designated prefix are built to be compliant with the Buy American Act of 1933 (BAA). Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements.

Please refer to the Room Controller page on our website for more information.

Product Specifications

Key Features

The Room Controller QuicKits provide a complete, all-in-one package solution. Easy to order, QuicKits are designed and packaged for immediate in-room installation.
The Room Controller includes three relays and up to three 0-10 VDC dimming outputs to control compatible dimmable ballasts. The switching relays and 0-10 VDC outputs are controlled separately, allowing flexibility in wiring and control. The Room
Controller is shipped preconfigured to work out-of-the-box when connected to Room Controller devices, allowing quick and easy daylighting controls, occupancy/vacancy sensing and manual switching.
Packages for Conference Rooms, Offices, Classrooms, and Healthcare
Click & Go ready, RJ45 connections
Preconfigured for automatic functionality upon power-up
Manual or Automatic On, bi-level, tri-level and dimming control strategies
Integral Demand Response input with four levels of preconfigured energy reduction
Built in tubular lighting control with preconfigured wallstation controls
Integral pillow speaker connections for GPCS (RC3DEHC)
Integral Solatube® connection for classrooms
Guaranteed compatibility with Cooper Lighting Solutions LED and 0-10V fluorescent fixtures
Ladderless UL 924 Emergency Mode testing (RC3DE & RC3DEHC)

Mechanical
Size: 14” W x 8 1/2” H x 11” D (355.6mm x 215.9mm x 279.4mm) Environment:

Operating temperature: 32°F to 104°F (0°C to 40°C)
For indoor use only

Electrical

Input Requirements :

120-277 VAC 60Hz
Maximum 20A combined load per Room Controller
- Ballast load: 20A @ 120/277 VAC (LED)
- Incandescent load: 15A @ 120 VAC
- Motor load: 1HP @ 120 VAC
- LED Drivers: Requires isolated LED drivers for optimal performance LED, Ballast or Incandescent Load: 3A
- Emergency Output (RC3DE/RC3DEHC only): UL 924
- Class 2 Dimming Output:
0-10 VDC, sinks up to 100mA per (40 µA max per circuit leakage to line)
Each 0-10V output supports up to 50 ballasts/drivers that draw the standard 2mA each
Emergency Output (RC3DE/RC3DEHC only): UL 924

Standards/Ratings

UL Approved
UL 508 Listed
UL 924 Listed
cULus Listed

Warranty
Five year warranty standard

Overview

The Room Controller QuicKits provide a complete, all-in-one package solution. Easy to order, QuicKits are designed and packaged for immediate in-room installation.
The Room Controller includes three relays and up to three 0-10 VDC dimming outputs to control compatible dimmable ballasts. The switching relays and 0-10 VDC outputs are controlled separately, allowing flexibility in wiring and control. The Room Controller is shipped preconfigured to work out-of-the-box when connected to Room Controller devices, allowing quick and easy daylighting controls, occupancy/vacancy sensing and manual switching.

Operation

The Room Controllers are connected to a 120 VAC or 277 VAC 20 Amp circuit to provide unit power and input power to the individual relays. The wallstations, occupancy/vacancy sensors, daylight sensors and receptacle control devices connect via QuickConnect cables providing a Class 2 connection. Upon power up the pre-engraved wallstation automatically controls the On/Off relays
and/or adjust the dimming outputs. The daylight sensor will immediately adjust the lighting levels based on natural light.

Installation

The line voltage section of the Room Controller provides the installing contractor space to make all line voltage connections and direct conduit access, reducing the need for additional junction boxes, while providing easy access to line voltage circuits. Low voltage devices are connected using Cat5 cables (See page 4 for included cables).
UL 924 relay is provided on some units for automatic emergency lighting control. The UL 924 relay automatically tracks with output 1 and can be connected to any of the three 0-10V dimmers. The UL 924 relay automatically closes and disconnects the 0-10V control upon loss of normal power providing adequate egress lighting control. Ladderless maintenance testing of the UL 924 relay can be acheived by pressing the ALL OFF button four times.