BEGA 50859.2 LED Ceiling Luminaire Aluminium Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50859.2 LED Ceiling Luminaire Aluminium
Product Usage Instructions
Instructions for use
Safety
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50859.2 LED Ceiling Luminaire Aluminium

Product Information:

Product Name: 50 859.2

Product Description: This luminaire is a high-quality lighting fixture that provides efficient and reliable illumination. It is equipped with LED modules and is designed to meet national safety regulations.
Safety: The installation and operation of this luminaire should only be done by a qualified electrician. The manufacturer does not accept liability for damage caused by improper use or installation. Any modifications made to the luminaire should be done by a qualified person.

Overvoltage Protection: The luminaire is equipped with electronic components that are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components.

Product Usage Instructions

Installation: Ensure that the installation is carried out by a qualified electrician who adheres to national safety regulations.
Cleaning: Regularly clean the luminaire using solvent-free cleansers to remove dirt and maintain its appearance.
Avoid Direct Contact: During installation or relamping, avoid touching the light output opening of the LED directly to prevent damage to the components.
LED Module Replacement: If the LED module needs to be replaced, follow these steps:
- Disconnect the electrical installation.
- Open the luminaire according to the installation instructions.
- Locate the label inside the luminaire indicating the designation of the LED module.
- Select a BEGA replacement module with matching light color and light output.
- Replace the module using standard tools.|
- Close the luminaire.
Spare Parts: The following spare parts are available for this luminaire:
- Trim ring: Part number 20 000 042 B2
- LED power supply unit: Part number DEV-0305/350i
- LED module 3000 K: Part number LED-0978/930
- Reflector: Part number 75 002 766

Ceiling luminaire · downlight for indoor use

50 859.2

Instructions for use

BEGA-50859.2-LED-Ceiling-Luminaire-Aluminium-1

Application
Ceiling luminaire downlight · indoor luminaire with symmetrical light distribution.
Non-glare light deflected downwards.

Product Description

Ceiling luminaire downlight »STUDIO LINE« Cast aluminium luminaire housing,finish Colour velvet black,inside hue aluminium matt
Trim ring · Chrome finish
Light-diffusing silicone lens
Reflector made of pure anodised aluminium
2 mounting holes ø 4.5 mm
Distance apart 70 mm
Connecting terminals 2.5@
Earth conductor connection
2-pole connection terminals for digital control LED power supply unit
220-240 V x 0/50-60 Hz
DC 196-250 V
DALI-controllable
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
– Safety mark
– Conformity mark
Weight: 1.6 kg

This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 11.5 W
Luminaire connected wattage 13.5 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C

50 859.2 K3

Module designation LED-0978/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1735 lm
Luminaire luminous flux 1220 lm
Luminaire luminous efficiency 90,4 lm / W

Lighting technology
Half beam angle 32°

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Remove mounting plate from the luminaire housing.
Unplug the earth conductor connection (plug contact).

Please note:

If the luminaire is to be mounted onto a metallic, electroconductive surface, it is mandatory to make sure that the mounting surface is connected conductive to the earth conductor of the luminaire!
Lead the power connecting cable through the mounting plate.
Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection.
The two connecting terminals marked DA, DA are provided for digital control purposes.
If these terminals are not assigned, the luminaire will work with full light output.
Establish the earth conductor connection to the luminaire housing (plug contact).
Press the luminaire housing firmly against the mounting plate and turn it clockwise firmly against the stop.
Screw enclosed trim ring with attached reflector into the luminaire housing by turning it clockwise.

Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the electrical installation.
Open the luminaire.
Please follow the installation instructions for the LED module.
Close the luminaire.

Spares