Aver M5 Document Camera User Guide
- June 7, 2024
- AVer
Table of Contents
Aver M5 Document Camera User Guide
Package Content
M5 Unit
Optional Accessories
-
Carrying Bag
-
Anti-glare Sheet
Connecting the M5 to a PC/Laptop
Software, FAQ, Training Videos
To download AVerTouch software, and check out frequently asked questions and training videos, please go to: https://www.averusa.com/education/support/
Overview
- ) USB 2.0 Cable
- Stand Base
- Mechanical Arm
- Capture/AF/LED Lamp Buttons
- Camera Lens
- LED Lamp
- Camera Head
- LED Status Indicator – solid green indicates power on.
- Built-in Mic
|
- Press for 1 second to capture a still image via AVerTouch.
- Press and hold 3 seconds to start recording via AVerTouch. To stop
- recording, press and hold 3 seconds again via AVerTouch.
---|---
|
- Press for 1 second to automatically adjust the focus.
|
- Press for 1 second to adjust the LED lamp brightness. 1st press: lamp on (level 1). 2nd press: lamp on (level 2). 3rd press: lamp on (level 3). 4th press: lamp off.
- Press and hold 3 seconds to rotate 180°.
| Press together for 1
second to freeze via AVerTouch.
Camera Head Angle
Move the camera head as figure shown.
[CAUTION] To avoid damage the camera head, hold the edge of the camera head to
rotate the camera head.
Camera Body Angle
[CAUTION] To avoid damage the camera unit, DO NOT pull the arm angle over
91.5°.
Shooting Area
When camera position is 350mm (13.78”) high, the shooting area will be A3 size
Unfold the Camera
[CAUTION] To avoid damage the camera head, DO NOT grab the camera head to
unfold the camera.
Specification
| Image Sensor | 1/3.2” CMOS |
|---|---|
| Pixel Count | 8 megapixels |
| Frame Rate | Max. 60fps @1920×1080 Max. 15fps @3264×2448 |
| Output Resolution | 3264×2448, 1920×1080, 1280×1024, 1280×720, 1024×768, |
800×600, 640×480, 640×360, 320×240, 320×184, 320×180
Focus| Auto (button)/Manual (via software)
Shooting Area| Larger than A3, 420mm x 315mm (16.53” x 12.4”)
Zoom| 16X Digital Zoom (via software)
Power Source| USB 2.0, 5V/0.5A
Consumption| 1.7Watts (lamp on) 1.3Watts (lamp off)
Operating Conditions| Temperature: 0°C to +40°C (+32°F to +104°F)
Humidity: 10% to 90%
Storage Conditions| Temperature: -30°C to +60°C (-22°F to +140°F)
Humidity: 10% to 90%
Lamp Type| LED
USB| USB 2.0 (for power and computer connectivity)
Mic| Built-in
Operating (L x W x H)| 313.4mm x 108.6mm x 370.0mm (12.34” x 4.28” x
14.57”)
Folded (L x W x H)| 115.9mm x 108.6mm x 323.6mm (4.56” x 4.28” x 12.74”)
Net Weight| 0.78kg (1.72lbs)
Gross Weight| 1.1kg (2.42lbs)
Software**| AVerTouch
Specifications are subject to change without prior notice
- It is suggested that the operating temperature should between 0°C and +35°C (+32°F and +95°F) when LED lamp is on.
WARNING
-
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Warranty will be void if any unauthorized modifications are done to the product. -
Do not drop the camera or subject it to physical shock.
-
Use the correct power supply voltage to avoid the damaging camera.
-
Do not place the camera where the cord can be stepped on as this may result in fraying or damage to the lead or the plug.
-
Hold the bottom of the camera with both hands to move the camera. Do not grab the lens or arm to move the camera.
-
Do not pull the camera arm and camera part in the opposite direction
Contact Information
AVer Information Inc.
https://www.averusa.com
668 Mission Ct., Fremont, CA 94539, USA
Tel: +1 (408) 263 3828
Toll-free: +1 (877) 528 7824
Technical support:
support.usa@aver.com
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-003.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>