AGIOSTAR 100500H5N LED Flood with Solar Panel Instruction Manual
- June 13, 2024
- AGIOSTAR
Table of Contents
AGIOSTAR 100500H5N LED Flood with Solar Panel
Product parameter
No.| Model| Power (W)| Lamp size(mm)| Photovoltaic pan.el size (mm)| Lamp
beads| CCT| Luminous flux (Im)
---|---|---|---|---|---|---|---
1| ZQJ·AAL085| sow| 20517042| 27018017| 5730/46PCS| 6500K| 400Im
2| ZQJ-ABL170| 100W| 26021542| 35029017| 5730/107PCS| 6500K| 800Im
3| ZQJ-ACL250| 200W| 29024042| 40035017| 5730/166PCS| 6500K| 1200Im
4| ZQJ-AEL420| 300W| 35029043| 53035017| 5730/358PCS| 6500K| 2000Im
No.| Model| Photovoltaic panel| Lithium iron phosphate battery| IP| Charge
time| Working time| Charge cycle
---|---|---|---|---|---|---|---
1| ZQJ-AAL085| 6W5V| 5000mAh3. 2V| 66| 4-6h@40000 Lux| >13h| >1200
2| ZQJ·ABL170| 12W SV| 10000mAh3. 2V| 66| 4-6h@40000 Lux| >13h| >1200
3| ZQJ-ACL250| 18W SV| 15000mAh3. 2V| 66| 4-6h@40000 Lux| >13h| >1200
4| ZQJ-AEL420| 25W SV| 25000mAh3. 2V| 66| 4-6h@40000 Lux| >13h| >1200
|
Use position
| Remote control distance|
The install height less than SMM/relevant glass panel protection methods and fixing device
|
Usage scenario
|
Net weiPaht(g) (Include am & solar pane)
| Wall installation| 8-10m| Glue/Tempered glass/Buckle| Outdoor| 1185
| Wall installation| 8·10m| Glue/Tempered glass/Buckle| Outdoor| 1855
| Wall installation| 8-10m| Glue/Tempered qlass/Buckle| Outdoor| 2465
| Wall installation| 8·10m| Glue/Temoered class/Buckle| Outdoor| 3945
Remote control parameter
Installation instruction
-
Drill ho les in the the installation position(Drill holes according to the bracket position of solar photovoltaic panel and the lamp), insert the expansion screw into the holes and knock-in, take down the nut on the expansion screws and fix the photovoltaic panel and lamp with it.
-
Fix the photovoltaic panel with butterfly nuts and screws; fix the lamp with hexagon nut and screws.
-
Adjust the ang l e: the photovoltaic panel faces 5-10 degrees to the south by west which form a certain angle with the horizontal.(South: 30°, North: 45 ° ), tighten it after selection. The angle of the lamp: choose the direction that needs lighting(Avoid the light of the lamp irradiating on the photovoltaic panels), tighten it after selection.
-
Connection: Plug the male and female well; and tighten the waterproor cap. Check whether the installation is secure and check the switch by remote contro l when finished the installation. If it is normal after checking, then complete the installation.
Cautions
- .Put away the install and keep it ~ from children.
- Built-in battery and the battery can be recycled, please do not throw it around.
- Built-in battery, do not place the product on fire or it might explode.
- Do not connect to AC1 10/220V to avoid damage the lamp.
- Please install the product on a flat and stable surface, and fix the photovoltaic panel well to avoid hurting people when wind blowing or other reasons.
- ln order not to affect the use effect, clean the dust or debris on the solar photovoltaic panels surf ace every 3-4 months.
- lt is normal that the charge effect will be weaken, and the luminous time will be shorten if encounter the weather like cloudy or rainy days in autumn and winter.
- Avoid installing the lamp, near the air condition heating objects or high voltage power grail system.
Customer Support
ZQJ-AAL085
ZQJ-ABL170
ZQJ-ACL250
ZQJ-AEL420
ITALIA MARKET SRL
VIA DELLE INDUSTRIE, 9/1
20883 MEZZAGO(MB), ITALIA
P.IVA: IT10502730962
HTTP://WWW.AIGOSTAR.COM
MADE IN CHINA
