BERSN Vesta-W4 LED Driver Owner’s Manual
- June 1, 2024
- BERSN
Table of Contents
BERSN Vesta-W4 LED Driver
Product Information
Specifications
- Product Name: Vesta-W4 LED Driver
- Power: 20W
- Current: 250-500mA
- Voltage: 40V
- Channels: 4-Channels RGBW
- Compatibility: Bridgelux LED
- Input Voltage: 120-277V AC
- Control: WiZ RGBTW
Product Usage Instructions
Features and Benefits
The Vesta-W4 LED Driver is designed to work with Bridgelux RGBW LEDs, offering color and tunable white control features. It enables a simple and cost- effective wireless lighting system for energy-saving and comfort.
Installation and Setup
- Ensure proper wiring connections as per the provided specifications.
- Use the dip-switch operation instructions to set the desired output mode for the LED channels.
- Connect the Vesta-W4 LED Driver to the Bridgelux RGBW LED.
- Connect the driver to a power source (120-277V AC).
Control and Operation
- The dual-protocol module allows for local messages for installation and connectivity to the WiZ cloud over a Wi-Fi network.
- This enables various functionalities from simple wireless dimming to cloud-based operations.
Maintenance
- Regularly check the wiring connections and ensure the proper functioning of the LED driver for optimal performance.
FAQ
What is the maximum cable length supported by the Vesta-W4 LED Driver?
The maximum cable length supported is 0.3 meters.
How do I connect the Vesta-W4 LED Driver to the Bridgelux RGBW LED?
You can connect them using compatible wiring connections based on the provided specifications and guidelines.
Features
Vesta-W4 LED Driver
- 20W 250-500mA DIP 40V WiZ RGBTW 120-277V CC 4-Channels RGBW LED Bridgelux
- Vesta-W4 LED Driver connected by WiZ PRO can work with Bridgelux RGBW LED to enable colors and tunable white control features.
- It enables simple, cost-effective wireless lighting systems for energy saving and comfort.
- The advanced design of the smart LED driver helps to build a reliable and standardized connected lighting system with different functionalities from simple wireless dimming to cloud-based operations
Features
- Easy wireless dimming and scheduling for energy saving and convenience
- No gateway needed
- Energy metering feature with 10% accuracy
- Wi-Fi dual protocol module which enables local messages for installation and connectivity to WiZ cloud over Wi-Fi network
- Future-proof flexibility, support OTA (Over-The-Air) firmware update
- Protective features (short-circuit, open-circuit, over-load, no-load)
- Reliable, flicker-free
- 5-year warranty.
Applications
Bridgelux RGBW Solution
Electrical Data
Item | Vesta-W4 LED Driver |
---|---|
Model No. | BXDR-PS-20BS-U405W-01- A |
Rated Power | 20W |
Output Channels | 4CH (RGBW) |
Output Current (4CH) | 500/400/300/250mA |
Output Voltage (4CH) | 18…40Vdc |
Nominal Input Voltage | 120…277VAC |
Nominal Input Current | 0.09-0.20A |
Max Input Current | 0.25A |
Nominal Input Frequency | 50…60Hz |
Power Factor | 0.9 @ rated output power |
Eff (type) | 84%@rated output power |
Total Harmonic Distortion | ≤15% @ rated output power |
Output Current Tolerance | ±5% |
Output Current Ripple LF | 5% |
Mains Surge Capability | L-N 1kV; |
Ambient Temperature | -20…+50°C |
Tcase Maximum | 80°C |
Humidity | 10~90% |
Lifetime | 50,000 hrs |
Control Mode | Wireless protocol = Wi-Fi |
Standby Power | ≦0.5W |
Dimming range | 10…100% Dimming Via WiZ App |
Isolation controls input to output | SELV (acc. IEC61347-1) |
Open load protection | YES |
Short circuit protection | YES |
Over power protection | YES |
Hot wiring | YES |
Certificate | CE-RED ENEC UKCA UL FCC |
RF Data
Work mode | . |
---|
Wi-Fi: 802.11b/g
Work frequency|
Wi-Fi: 2.4… 2.4835 GHz
Modulation mode|
Wi-Fi: CCK/DS/OFDM
RF output power|
Wi-Fi: 20 dBm
Rx sensitivity|
Wi-Fi: -98
Wi-Fi: -74
Wiring and Connections
Input wire cross-section | 0.75…1.5 mm2 / AWG 18…16 |
---|---|
Input wire strip length | 8.5.. 9.5 mm |
Output wire cross-section | 0.5…1.5 mm2 / AWG 20…16 |
Output wire strip length | 8.5.. 9.5 mm |
Maximum cable length | 0.3 m |
Dip-switch Operation Instructions
Dimensions
Dimensions (mm)
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This device must operate with a minimum distance of 20 cm between the radiator
and the user body.
Documents / Resources
|
BERSN Vesta-W4 LED
Driver
[pdf] Owner's Manual
Vesta-W4, Vesta-W4 LED Driver, LED Driver, Driver
---|---