COOPER Lighting Solutions RPTR EXPS-24V Greengate Network Repeater Instructions
- June 12, 2024
- COOPER Lighting Solutions
Table of Contents
COOPER Lighting Solutions RPTR EXPS-24V Greengate Network Repeater
Product Information
The Greengate Network Repeater is an accessory designed to extend the lighting control network beyond the specified 4,000 feet or more than 32 panels. It provides a level of isolation between network segments, minimizing potential disruption from network faults. The repeater has a mechanical size of 5.5H x 4W x 1.25D inches (140mm x 102mm x 31mm).
Ordering Information:
- Catalog Number: RPTR
- Description: Repeater with power wiring whip for connection to a 24V DC power source
In addition, an external 24V power supply (Catalog Number: EXPS-24V) is required when using the repeater on Room Controller networks.
Product Specifications:
- Mechanical Size: 5.5H x 4W x 1.25D inches (140mm x 102mm x 31mm)
- Operating System: Consult the website for warranty information
Product Usage Instructions
Wiring:
- Connect the Network Termination Jumper J51 to only the two end panels on the entire lighting control panel.
- Match positive to positive and negative to negative when wiring.
- Disconnect the shield.
Connecting the Repeater:
- Connect the Network Repeater to a CK-T panel for power purposes.
Please note that specifications and dimensions are subject to change without notice. For further details and warranty information, please visit the website of Cooper Lighting Solutions.
Greengate
RPTR – Network Repeater
Provides the ability to extend the lighting control network beyond the
specified 4,000 feet or more than 32 panel
Typical Applications
- Office
- Education
- Healthcare
- Hospitality
- Retail
- Industrial
- Manufacturing
Interactive Menu
- Order Information
- Additional Resources
- Wiring Diagrams
- Product Warranty
Top Product Features
- Allows the expansion of the network wire beyond the specified 4,000 feet limitation
- Assists in minimizing the potential for network disruptions from ground faults present on the lighting control low-voltage wiring between network ports
- In addition to allowing the network length to extend beyond the specified 4,000 ft., the Network Repeater also provides a level of isolation between network segments minimizing potential disruption from network faults
Dimensional Details
Order Information
This is an accessory for all ControlKeeper and Room Controller network products. When ordering these Lighting Control Systems specify the Network Repeater as a separate system accessory
Catalog Number
Catalog Number | Description |
---|---|
RPTR | Repeater with power wiring whip for connection to a 24V DC power |
source
EXPS-24V| External 24V power supply for RPRT – required when RPTR is
used on Room Controller networks
Product Specifications
Key Features
- Can expand network wire beyond the specified 4,000 feet limitation
- Minimizes the potential for network disruptions from ground faults
Mechanical
- Size: 5.5”H x 4”W x 1.25”D (140mm x 102mm x 31mm)
Electrical
Operating system:
- 2 Network Wiring Terminal Blocks
- 1 Power Wiring Cable Whip
- Power draw: 91mA when powered by 24VDC
Warranty
- Consult the website for warranty information
Wiring
Lighting Control Panel (CK-T shown)
Additional Wiring
Network Repeater connected to a CK-T panel for power purposes
Control Systems
- Greengate
- DLVP
Cooper Lighting Solutions
- 1121 Highway 74 South
- Peachtree City, GA 30269
- P: 770-486-4800
- www.cooperlighting.com
- © 2022 Cooper Lighting Solutions
- All Rights Reserved.
- Specifications and dimensions are subject to change without notice.
References
- Building Lighting - Control Panels - Greengate | Cooper Lighting Solutions
- Search | Cooper Lighting Solutions