BEGA 31047 LED Wall Luminaire Instruction Manual

BEGA 31047 LED Wall Luminaire

Product Information

Luminaire for versatile applications where a highly robust construction and corrosion resistance are required.

Product Usage Instructions

1. Technical Specifications:****
   Parameter| Value
   ---|---
   Lamp Module connected wattage| 13.7 W
   Luminaire connected wattage| 16 W
   Rated temperature| 25°C to 45°C
   Ambient temperature| max. 45°C
   Module designation| LED-0905/830
   Colour temperature| 3000 K
   Colour rendering index (CRI)| CRI > 80
   Module luminous flux| 2360 lm
   Luminaire luminous flux| 890 lm
   Luminaire luminous efficiency| 55.6 lm/W

2. Overvoltage Protection:
   The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against transients, it is recommended to use separate overvoltage protection components. These components can be found on our website at www.bega.com.

3. Safety:
   The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should carry out the installation and commissioning. The manufacturer does not accept liability for any damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for those modifications will be considered the manufacturer.

4. Installation:
   LEDs are high-quality electronic components. During installation or relamping, avoid touching the light output opening of the LED directly.

5. Bronze:
   The luminaire is made of massive cast bronze and is delivered with the metal’s natural surface. Over time and due to weather factors, a natural patina characteristic for bronze will develop.

6. Spare Parts:****
   Spare Part| Part Number
   ---|---
   Spare glass| 11 002 313
   LED power supply unit| 11 DEV-0312/700
   LED module 3000 K| LED-0905/830
   Gasket| 83 000 461

Instructions for use

Application

• Impact resistant wall luminaire made of massive cast bronze.
• Luminaire for versatile applications where a highly robust construction and corrosion resistance are required

Product Description

• Luminaire made of cast bronze and stainless steel
• Crystal glass with optical texture, white inside
• Silicone gasket 2 mounting holes ø 5.5mm
• Distance apart 140mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5mm
• Connection terminal 2.5@
• Earth conductor connection
• BEGA Ultimate Driver®
• LED power supply unit 220-240 V x 0/50-60 Hz
• DC 176-276 V
• DALI-controllable
• Basic insulation is provided between the mains and control cables
• BEGA Thermal Control®
• Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
• Safety class I
• Protection class IP 65
• Dust-tight and protection against water jets
• Impact strength IK09
• Protection against mechanical impacts < 10 joule
• • Weight: 5.7 kg
• This product contains light sources of energy efficiency class(es) D

Lamp

• Module connected wattage 13.7 W
• Luminaire connected wattage 16 W
• Rated temperature ta=25 °C
  Ambient temperature ta max=45 °C

31 047K3

• Module designation LED-0905/830
• Colour temperature 3000 K
• Colour rendering index CRI > 80
• Module luminous flux 2360 lm
• Luminaire luminous flux 890 lm
• Luminaire luminous efficiency 55,6 lm/W

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.

• Undo screws.
• Remove luminaire top with glass and gasket.
• Lead the mains supply cable through the cable entry into the luminaire back housing.
• Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
• Be sure to use the gasket rings supplied.
• Make the earth conductor connection and the electrical connection.
• For digital control please use the connecting terminal DA, DA.
• In case this terminal is not used the luminaire will be operated at full light output.
• Insert glass with gasket and luminaire top.
• Make sure that the gasket is in correct position.
• Tighten screws firmly

Replacing the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
• The module can be replaced by qualified persons using standard tools.
• Disconnect the system and open the luminaire.
• Please follow the installation instructions for the LED module.
• Inspect and, if necessary, replace the luminaire gaskets.
• Defective glass must be replaced.
• Close the luminaire.

Bronze
The luminaire is made of massive cast bronze and delivered with the metal’s natural surface. Time and weather factors create the natural patina characteristic for bronze.

Spares

• Spare glass 11 002 313 11
• LED power supply unit DEV-0312/700
• LED module 3000 K LED-0905/830
• Gasket 83 000 461

BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden · [email protected]
www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>