BEGA 67 544.3 Table Lamp for Indoor Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 67 544.3 Table Lamp for Indoor
Product Information
Product Description| Luminaire made of Aluminium, finish Polished aluminium
Hand-blown opal glass, satin matt
---|---
Weight| 1.5 kg
Lamp Luminaire| Screw base E 27
Lamp Output| Max. 75 W
Luminaire Efficiency| 80%
Product Usage Instructions
1. Insert the lamp into the lampholder.
2. Place the glass into the notches of the glass support.
3. Connect the luminaire to the mains supply (230 V).
4. To turn the luminaire on or off, use the toggle switch in the lamp base.
Note: Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Safety Information
The installation and operation of this luminaire are subject to national safety regulations. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible forthese modifications shall be considered the manufacturer.
Spares
| Ersatzteile | Replacement Part Number |
|---|---|
| Ersatzglas | 11 002 897 .0R G |
| LED-Leuchtmittel 2700 K | 13 548 |
| LED-Leuchtmittel 3000 K | 13 586 |
| Fassung Druckschalter | 63 000 339 |
| 63 000 421 |
Dimension
Table lamp for indoor use
Application
Table lamp · indoor luminaire made of metal base and hand-blown opal glass, satin matt for free radiating and glare-free light.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 75 W
- This product contains light sources of energy efficiency class E
- Supplied lamp
- BEGA LED lamp 13548
- LED 7 W · 805 lm · 2700 K dimmable
- Supplied lamp
- BEGA LED lamp 13586
- LED 7 W · 805 lm · 3000 K dimmable
- Luminaire efficiency: 80%
- Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product description
- Luminaire made of Aluminium,
- finish Polished aluminium
- Hand-blown opal glass, satin matt
- Built-in toggle switch
- Black cable · 2 m, with safety plug
- Lampholder E 27
- Safety class I
- – Conformity mark
- Weight: 1.5 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
- Insert lamp into lampholder.
- Place glass into the notches of the theglass support.
- Connect luminaire to mains supply (230 V).
- To turn the luminaire on or off use the toggle switch in the lamp base.
Relamping · Maintenance
- Disconnect the electrical installation.
- Take off glass from luminaire housing.
- Clean luminaire and glass.
- Use only solvent-free cleansers.
- Change the lamp.
- Fix the glass.
Spares
Spare glass 11 002 897 .0R G
LED lamp 2700 K 13 548
LED lamp 3000 K 13 586
Lampholder 63 000 339
Push buttom 63 000 421
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>