BEGA 24053 Wall Luminaire Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
**BEGA 24053 Wall Luminaire Instruction Manual
**
Application
Wall luminaire with shielded light.
Light exit 360°.
The light is deflected by means of a conical reflector onto the surface to be
illuminated.
Product description
Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Borosilicate glass
Silicone gasket
Reflector made of pure anodised aluminium
All-side light output 360° 2 mounting holes ø 4.8mm
Distance apart 134mm
2 cable entries for through-wiring of mains supply cable ø 7-10.5mm
Connecting terminal and earth conductor terminal 2.5@
LED power supply unit
220-240 V 0/50-60 Hz
DC 170-280 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK09
Protection against mechanical impacts < 10 joule
– Safety mark
– Conformity mark
Weight: 1.8 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be carried out by a qualified
electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation.
If subsequent modifications are made to the luminaire, the person responsible
for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend
separate overvoltage protection components.
You can find them on our website at www.bega.com.
Lamp
Module connected wattage 19.1 W
Luminaire connected wattage 23 W
Rated temperature ta=25 °C
Ambient temperature ta max=30 °C
24 053K3
Module designation LED-0791/830
Colour temperature 3000 K
Colour rendering index CRI >80
Module luminous flux 3050 lm
Luminaire luminous flux 1262 lm
Luminaire luminous efficiency 54,9 lm/W
24 053K4
Module designation LED-0791/840
Colour temperature 4000 K
Colour rendering index CRI >80
Module luminous flux 3350 lm
Luminaire luminous flux 1387 lm
Luminaire luminous efficiency 60,3 lm/W
Installation
LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during
installation or relamping.
Undo hexagon socket head screws – wrench size 3 – up to the stop and lift
luminaire top.
Pull plug-connection of the LED connecting cable carefull out of the luminaire
top.
Disconnect plug connection.
Lead the mains supply cable through the cable entry of the luminaire base.
Notice position of use “arrow down” of the luminaire back plate.
Fix luminaire base with enclosed or any other suitable fixing material onto
the mounting surface.
Be sure to use the gasket rings supplied.
Make the earth conductor connection and the electrical connection.
In order to guarantee the maximum service life of the electrical components,
the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the
position marked by the red information label immediately before finally
closing the luminaire.
Make earth conductor connection between luminaire top and luminaire base.
Push plug into coupler as far as it will go.
Make sure that gasket is positioned correctly.
Install the luminaire top, press-on and tighten screw.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.
Spare glass 11 003 184
LED power supply unit DEV-0277/700
LED module 3000 K LED-0791/830
LED module 4000 K LED-0791/840
Reflector luminaire base 76 001 483
Reflector luminaire top 76 001 618
Gasket housing 83 001 523
Gasket glass 83 001 555
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>