BEGA 31027 Wall Luminaire Berlin Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
Wall luminaire » Berlin «
31 027
31027 Wall Luminaire Berlin
Instructions for use
Application
Wall luminaire with antique glass.
Lamp
| Module connected wattage | 3.9 W |
|---|---|
| Luminaire connected wattage | 5 W |
| Rated temperature | ta = 25 °C |
| Ambient temperature | ta max = 35 °C |
31 027 K3
| Module designation | LED-0480/830 |
|---|---|
| Colour temperature | 3000 K |
| Colour rendering index | CRI > 80 |
| Module luminous flux | 715 lm |
| Luminaire luminous flux | 356 lm |
| Luminaire luminous efficiency | 71,2 lm / W |
**Product description
**
Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Antique glass
2 mounting holes ø 5.2 mm
Distance apart 70 mm
1 cable entry for mains supply cable up to ø 10,5 mm
Connecting terminal 2.5◻ with plug connection
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit
220-240 V ≂ 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 23
Protected against granular foreign bodies
≥ 12 mm and showers up to 60°
Impact strength IK03
Protection against mechanical impacts < 0.35 joule
– Safety mark
****– Conformity mark
Weight: 3.2 kg
This product contains light sources of energy efficiency class(es) C
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be carried out by a qualified
electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation.
If subsequent modifications are made to the luminaire, the person responsible
for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we
recommend separate overvoltage protection components. You can find them on our
website at www.bega.com.
Installation
Undo screw at wall box and remove the mounting plate.
Lead the mains supply cable through the cable entry of the mounting plate.
Note position of application of the mounting plate “arrow down”.
Fix the mounting plate with enclosed or any other suitable fixing material
onto the mounting surface.
Be sure to use the gasket rings supplied.
Make earth conductor connection and electrical connection to the connecting
terminal (plug connection).
Make earth conductor connection between luminaire housing and mounting plate.
Push plug into coupler as far as it will go.
Note position of application of the luminaire “arrow down”.
Place wall bracket onto mounting plate, adjust and fix with screw.
Place luminaire cage on wall bracket and secure with cap nuts firmly.
Assemble luminaire top.
**Cleaning · Maintenance
**
Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.
Spares
| Spare glass internal bowl | 11 301 441 |
|---|---|
| Spare glass | 14 033 804 |
| LED power supply unit | DEV-0303/350 |
| LED module 3000 K | LED-0480/830 |
| Gasket glass internal bowl | 83 141 2 |
BEGA Gantenbrink-Leuchten KG
Postfach 31 60
58689 Menden
info@bega.com
www.bega.com
Documents / Resources
| BEGA
31027 Wall Luminaire
Berlin
[pdf] Instruction Manual
31027 Wall Luminaire Berlin, 31027, Wall Luminaire Berlin, Wall Luminaire,
Luminaire
---|---