BEGA 67937 Ceiling and Wall Luminaire for Indoor Use Instruction Manual

: June 13, 2024
: BEGA

Table of Contents

Instructions for use
Safety
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**BEGA 67937 Ceiling and Wall Luminaire for Indoor Use Instruction Manual

**

Instructions for use

Application

Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and metal housing, for all lighting tasks. They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

Lamp

Luminaire with screw base E 27
Lamp output max. 75 W
This product contains light sources of energy efficiency class E

Supplied lamp

BEGA LED lamp 13548
LED Retrofit 7 W · 805 lm · 2700 K
dimmable

Supplied lamp

BEGA LED lamp 13586
LED Retrofit 7 W · 805 lm · 3000 K
dimmable

Luminaire efficiency: 59%

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product description

Luminaire made of aluminium alloy
Finish Colour white
Hand-blown opal glass, satin matt, with sliding-bolt closure 2 mounting holes ø 5.5mm
Distance apart 230mm
2 cable entries for through-wiring for mains
cable up to ø 10.5 mm max. 3 × 1.5@
Connection terminal 2.5@
Earth conductor connection
Lampholder E 27
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK06
Protection against mechanical impacts < 1 joule
r – Safety mark
c – Conformity mark
Weight: 3.5 kg

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

Lead the mains supply cable through the cable entry into the luminaire housing. For wall installation note position of applicationof luminaire »arrow down«. Fix luminaire housing with enclosed or anyother suitable fixing material on to the mounting surface. It is imperative to use the enclosed gaskets.Make earth conductor connection. Push silicone sleeves over the lines and make electrical connection to the terminal. Insert the lamps. Insert the opal glass into sliding bolt glass closure and turn clock-wise up to the stop

Place glass to the luminaire housing and observe that the holding spring bolts fit into the notches of the glass. Turn the glass clockwise until it is locked. Thus, you reach a safe and vibration-resistant holding of the glass.
To release the glass from the luminaire housing, turn it counter-clockwise.

Relamping · Maintenance

Disconnect from main supply.
Unscrew glass from luminaire housing by turning it counter-clockwise.
Clean glass and luminaire regularly with solvent-free cleansers from dirt. Change the lamp.
Screw in glass by turning it clockwise beyond the stop.

Accessory · Trim rings

For this luminaire metal trim rings in 4 surfaces are optional available.
Trim rings are accessories and must be ordered separately.

Item Part.