BEGA 50752.6 Floor Lamp for Indoor Use Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 50752.6 Floor Lamp for Indoor Use
Instructions for use
Application
Floor lamp · indoor luminaire with impact resistant synthetic diffuser and
metal housing for shielded light, deflected upwards and downwards.
DIMENSION
Product Description
- Floor lamp »STUDIO LINE«
- Metal housing, finish Colour velvet black Aluminium housing shield,
- Finish Colour velvet black
- inside hue matt copper
- Impact-resistant synthetic cover, translucent white
- Touch-controlled dimmer for
- infinite light adjustment
- Black cable · 2 m, with safety plug
- LED power supply unit
- 220-240 V y 50-60 Hz
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
- Safety class I
- Conformity mark
- Weight: 9.8 kg
- This product contains light sources of energy efficiency class(es) D
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
FEATURES
Lamp
- Module connected wattage 23 W
- Luminaire connected wattage 26.5 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 55 °C
50 752.6 K3
- Module designation 2x LED-0447/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 3790 lm
- Luminaire luminous flux 2275 lm
- Luminaire luminous efficiency 85,8 lm / W
Installation
LED are high-quality electronic components! Please avoid touching the light
output opening of the LED directly during installation or relamping.
Carefully remove the floor lamp from its packaging and set it up. Make sure
that the luminaire is in a firm and secure position. Connect luminaire to
mains supply (230 V). Press sensing device gently to turn the luminaire on or
off.
Holding the sensing device enables to adjust the light intensity infinitely.
Cleaning Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt.
- We recommend that you dry-clean the sensing device.
Replacing the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
- Defective luminaire cover must be replaced. Close the luminaire.
Spares
- Synthetic cover 15 000 424
- LED power supply unit DEV-0338/700i
- LED module 3000 K LED-0447/930
- Shield 71 003 353 B28
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden
info@bega.com
www.bega.com