BEGA 24 199 Ceiling Wall and Pillar Luminaire Instruction Manual

BEGA 24 199 Ceiling Wall and Pillar Luminaire

Product Information

The Decken-, Wand- und Pfeilerleuchte is a ceiling, wall, and pillar luminaire with a high protection class (IP65). It is made of an aluminium alloy and features impact-resistant crystal glass with light-diffusing structures. The luminaire has a weight of 2.7 kg and uses an E27 screw base for the lamp. It comes with a light source that has a maximum output of 60W and an efficiency rating of 47%. Additionally, it is dimmable and compatible with radio- controlled versions (Zigbee 3.0). BEGA LED lamps can be used as replacements for this luminaire.

Usage Instructions

1. Ensure that the installation and operation of the luminaire comply with national safety regulations.
2. Only a qualified electrician should perform the installation and commissioning.
3. Do not make any modifications to the luminaire without proper authorization.
4. To install the luminaire, follow these steps:
5. Loosen the screws.
6. Install the lamp with the screw base (E27).
7. Place the glass with the provided gasket and ring.
8. Do not use high-pressure cleaners for cleaning the luminaire. Instead, open the luminaire and clean it using appropriate cleaning products.
9. Close the luminaire after cleaning.
10. For spare parts, the following items are available:
    • Spare glass: 11 002 814
    • LED lamp 3000K: 11 13 584
    • Lampholder: 63 000 355
    • Gasket: 83 001 831

For more detailed technical and lighting data, refer to the data sheets available on the manufacturer’s website.

Application

• Shielded ceiling, wall, and pillar luminaire with high protection class.
• A luminaire made of aluminum alloy and impact resistant crystal glass with light-diffusing structures.

Product Description

• Luminaire made of aluminum alloy, aluminum and stainless steel
• BEGA Unidure® coating technology
• Crystal glass coated 2 mounting holes ø 5.5 mm
• Distance apart 144 mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
• Connection terminal 2.5@
• Earth conductor connection
• Lampholder E 27
• Safety class I
• Protection class IP 65
• Dust-tight and protection against water jets
• Impact strength IK08
• Protection against mechanical impacts < 5 joule
  • Safety mark
  • Conformity mark
• Weight: 2.7 kg

Safety

• The installation and operation of this luminaire are subject to national safety regulations.
• Installation and commissioning may only be carried out by a qualified electrician.
• The manufacturer accepts no liability for damage caused by improper use or installation.
• If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Lamp Specification

• Luminaire with screw base E 27
• Lamp output max. 60 W
• This product contains light source of energy efficiency class E

Supplied lamp

• BEGA LED lamp 13 584
• LED Retrofit 7 W · 805 lm · 3000 K
• Luminaire efficiency: 47%

Additional BEGA LED lamps are available for this luminaire:

• 13 586 LED 7 W · 805 lm · 3000 K dimmable
• 13 588 LED 8 W · 1055 lm · 3000 K
• 13 590 LED 12 W · 1400 lm · 3000 K
• 13 592 LED 12 W · 1400 lm · 3000 K dimmable

Radio-controlled version (Zigbee 3.0):

• 13 555 LED 9 W · 805 lm · 2700 K dimmable
• 13 556 LED 9 W · 805 lm · 2700 – 6500 K dimmable · tunable white
• 13 557 LED 9.5 W · 805 lm · 2700 – 6500 K dimmable · tunable white · RGBW

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Installation

• Undo screws.
• Remove the frame and glass with the gasket.
• Lead the main supply cable through the cable entry of the luminaire base.
• Fix the luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
• Be sure to use the gasket rings supplied.
• Make an earth conductor connection.
• Push silicone sleeves over the lines and make an electrical connection.
• Insert lamp.
• Insert glass with gasket and frame.
• Make sure that the gasket is positioned correctly. Tighten screws evenly.

Dimension

Cleaning And Maintenance

• Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
• Do not use high-pressure cleaners.

Relamping And Maintenance

• Disconnect the electrical installation.
• Open the luminaire and clean it.
• Use only solvent-free cleaning agents. Change the lamp.
• Check the gasket and replace, it if necessary.
• Close the luminaire.
• For cleaning, do not use high-pressure cleaners.

Spares

• Spare glass 11 002 814 11
• LED lamp 3000K 13 584
• Lampholder 63 000 355
• Gasket 83 001 831

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com.

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>