WAITIEE Z5S 3-in-1 Fast Wireless Charger User Manual

WAITIEE Z5S 3-in-1 Fast Wireless Charger User Manual

Notice: To ensure charging 3 devices safely and efficiently, you must use 9V/2A adapter and quick charge cable, if including 15W fast charging phones, you must use 9V/2.7A or 12V/2A adapter and quick charge cable (if not use the appropriate adapter and quick charge cable, the charger may not charge phone fast, or may not charge 3 devices simultaneously, or may even damage the charger)

Product Introduction

The 3-in-1 wireless charger, a compact charging house, powered from only one outlet, can charge 3 devices simultaneously.For charging your mobile phone and apple watches, just put them on, all this will make your desk clean and tidy, and make your life easier. The charger is so space-saving designed that can help you integrate your mobile phone intelligent life very well, especially for Apple user. Besides, it is fashion that the light ring is so shining and has breathing effect showing the charging state, if you want to turn off or turn on the light, just touch the touch-sensitive key.

Product Appearance

Operation Steps

Touch ON/OFF the light

1. Connect the charger to a 9V/2A, 9V/2.7A or 12V/2A adapter through a type-C quick charge cable to switch on the power;
2. Put your phone on then charge;
3. Insert the USB plug of the apple watch charging cable into the USB connection of this wireless charger’s apple watch charging cable, and then put the cable into the storage area of the apple watch cable. Put the apple watch on and suck it up to charge(roll the watchband to minimize to charge better);
4. Plug your earphone case in the connector to charge.

LED Light Ring Instructions

Green light is on:
Standby mode or not charging the phone

Blue light is breathing:
Wireless charging the phone

Blue and Green light flash:
Foreign body is detected or the phone is misaligned (the phone charging will automatically stop)

Charging Schematic Diagram

Charging 3 Apple devices simultaneously

Applicable Devices

1. Smart Phone:
   Apple: iPhone 12,12 Pro,12 Pro Max,12 mini, SE,11,11 Pro, 11 Pro Max, Xs, Xs Max, XR, x, 8,8 Plus.
   Samsung: Galaxy S: 21 5G, 21 + 5G, 21 Ultra 5G, FE 5G, 20 5G, 20+ 5G, 20 Ultra 5G, 10, 10+10e, 9, 9+, 8, 8+, 7, 7 edge, 6, 6 edge, 6 edge+, 6 G9209, 6 Active; Galaxy Note: 10, 10e, 10+, 9, 8, 7, 6, 5.
   Huawei: P30 Pro, P40 Pro, P40 Pro+; Mate: 40E, 40 RS, 40 Pro+, 40 Pro, 40, 30E Pro, 30 5G, 30 Pro 5G, 30, 30 Pro, 30 RS, 20 Pro, 20 RS, RS;
   Xiaomi: 10, 10 Pro, 9, 9Pro, Mix 3, Mix 2s. Including other devices with wireless charging receiver built-in; (Note: All devices must meet the Qi standard).

2. Smart Watch:
   Apple: iWatch S1, S2, S3, S4, S5, S6, SE.

3. Earbuds:
   Apple: AirPods 1, AirPods 2, AirPods Pro

Product Specification

Input: 9V/2A,9V/2.7Aor 12V/2A
Phone Output: 15W/10W/7.5W/5W
Watch Output: 2.5W (Apple Watch S1,52,S3,S4,55,S6,SE)
Earbuds Output: 2.0W Lightning (Apple AirPods 1, 2,AirPods Pro)
Input Socket: Type-C
Transmission Distance(Phone): ≤5mm
Conversion Rate(Phone): ≥73%
Product Size: 136X101X136mm
Weight: 329g

Accessories List

Wireless Charger 1, Type-C quick charge cable1, QC3.0 adapter1, User manual1

Attention

1. Please keep the charger away from water or other liquid;
2. If you need to clean the charger, please make sure it is not connected power supply;
3. Using Environment temperature remains 0-45°C.

Answer questions

1. If you’re experiencing interrupted or slow charging, check the following:
   (1) The back of your phone should not have any metal, pop sockets, or credit cards.
   (2) Put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).
   (3) The wireless charging coil on Sony phones is located slightly below center
   (4) Phone cases should be no thicker than 5 mm for effective charging.
   (5) Check whether the adapter is QC3.0 fast charger.

2. If you’re failing to charge your device, please try out the following:
   (1) Please restart your cell phone and test with other USB cable.
   (2) Please check whether the indicator turns on or not.
   (3) Please check the Adapter is QC3.0 Quick Charger (Output:9V/2A) or not, iPhone original adapter does not match the wireless charger.
   (4) Please check your Phone case thickness(<=5mm). Metal ring or Magnetic Pad will not be available.

3. If you’ reusing the recommended wireless charger with the QC3.0 Adapter and have removed any potential charging obstructions, but are still experiencing issues, try:
   (1) Replacing the cable connecting your wireless charger.
   (2) Rebooting your phone.
   (3) Unplug the adapter and reinsert.

After-sales service

If your problem has not been solved by following the above steps, please reach out to us via Amazon’s message centerorinfo@waitiee.com. In order to solve it for you faster, please have the following information at hand: your phone’s model, the type of wall charger you are using, and the type of phone case you are using (with a link if possible) Optionally, you may include a video to illustrate the problem you are having.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>