SHARGEEK STM2E-1 130W Portable Power Bank User Manual

USER MANUAL
130W Portable Power Bank

Specifications

Name: SHARGEEK 130W Portable Power Bank
Model: STM2E-1
Output Port: USB.CX1, USBAX1
Material: Fireproo (V0) PC + Oxidized Aluminum Alloy
Battery Cell: 21700 Lithium-ion
Rated Capacity: 12000 mAh (/3
Typical Capacity: 20000 mAh/72Wh
Dimension: 156X65X30.4 mm
Weight: 450g
USB-CInput: 5V/SV/12V/15V=34, 20V~3.25 65 W Max)
USB-A Output: 5V~3A, 9V~3A, 12V=2.5A (30W Max)
USB-C Output: SV/9V/12V/15V=3A, 20V~5A
PPS Output: 33-21V-5A
USB-C + USB-AOutput: 100W -+ 30W (130W Max)

Important Safety Notes

1. Store the product in a cool and dry place.
2. Operating temperature should be between 32°F to 113°F (0°Cto 450
3. DO NOT disassemble the product. Take it o a qualified service person when service or repair i required. Incorrect reassembly may resultin a isk ofire or injury to persons
4. DO NOT use power supplies without authentic certification, or it may resultin a isk offire o injury to persons.
5. If the product s not to be used for a ong period of time, you should charge (to 80%) and discharge (to 20%) the product every 3 months.
6. The product may get warm during charging process,itis a normal condition, and there’ no need to worry aboutit.
7. Innormal conditions, the battery if will decrease over several years,
8. DONOT dispose the product in heat or fire.
9. DONOT clean the product with harmful chemicals or detergents.
10. Misuse, dropping, or excessive force may cause product damage.
11. When disposing of secondary cells or batteries, keep cells or batteies o ifferent electrocherical systems separate from each other.

**** This symbol indicates that this product shall not be treated as household waste. instead it shall be handed over to the applicable collection point for the recycling of electronic equipment.

Notice

Declaration of Conformity
Hereby, SHARGEEK declares that the product type STM2E-L is in compliance with Directive 2014/30/€U.
FCC Statement
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conitions: 1) This device may not cause harmiful interference, and (2) this device must acceptany interference received, including interference that may cause undesired  operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC.
Rules, These limits are designed to provide reasonable protection againstharmfulinterference n aresidential instalation.
This equipment generates, uses, and can radiate radio frequency.

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/ TV technician for help.

Terms Introduction

1. EMOS: Energy Management 0, s a patented operating system used for electric power management, developed by SHARGEEK’ 5 RD tear.
2. Voltage nit: V| Current Unit: A| Power Unit: W Temperature Unit: °C
3. Short Press: Press and release immediately
4. Long Press: Press and hold for more than 2 seconds, then release.

Top GUI Introduction

The top GU includes 5 diffeent information groups, each group information i described as belov:

1. Port tatus
   This group displays connected port, ca either be Us3-C USE A .

2. Input tatus
   This groupdisplays the input information when the productis being charged. The input information includes charging voltage (such a5 ),charging current (such as ), charging power and the charging port thi product can only be charged Via USB-C). The charging portis also displayed as an icon such as .

3. Output Status
   This group displys the output information when the product is charging other device, The output nformationincludes output voltage(such as ) output curent (such as ) and the output power ofspecfc port the output port could ther be USB.C,  ROLL or TOTAL which s displayed 35 an con shown asbelow:

Only when the product s charging mltile devices, can the display method be changed via shor pess the main button Note that when the display mode s i ROLL status, it wil isplay ‘each port’s output status in turn, and whenitis in TOTAL status, it will display  the otal output pover.

4. Battery nformation
   This group shows curent sttus of the batery pack, ncluding battery life, the voltage of the total battery pack and real-time curren. Note the the battery icon designed with diferent colors based on different battery level, and its expressed as 2 percentage (ex.  30 means 30%). The con colordefntion is shown asbelow:

5. System status
   System status shows the temperature ofthe battery pack (following the icon ), the temeperature ofthe crcuit board (following the icon ), and the running time of the whole system

Second-Level GUI Introduction

Long press the main button (when the system s in the Top-Level Ul wilentr the seconcklevel GUI,providin items below:

1. & Detal information about the bttery pack
2. Configure the it of temperature
3. Reset the system running time.
4. Conligure the display settings
5. System power off
6. Exit (Return back to Top-Level GUI)

You can enter above items when corresponding icons lashing via Long Pressing the main button. f ot partculary indicated, “Short Press”is used toselecttems while “Long Press” s used to change parameters

1. Battery Information
   Thistem displays detailed information about the battery pack.
   It shows the vltage of each battery cell sampled by the nternal Rardware coulometer.The coulometer keeps monitoring each batterycel (including volage, temperature etc) to ensure.
   saety.
   Note that fyou fnd the voltage ofa attery cell is abnormally igh orlow (normal range is 2.6V~4.21), and the power barik stops charging or eing charged, please contact us.
   

2. Temperature Unit Configuration
   You can configure the unit of the temperatre either in celsius.
   (¢€) or fahrenheit (F).
   

3. System Running Time Reset
   You can reset the system running time to get the relative charging time for specific devices.
   

4. Display Configuration
   You can modify the display sleep time to or disable sleep Function or change thedisplay direction to or .
   

5. System Power Off
   Turn off the system to save power, especially when you are not intend to useit for a long period of time:
   

6. Return to Top-Level GUI
   Once youfinish the configuration or information checking, you an return to Top-Level GUI via Long Pressing EXIT.
   

Warning information

EMOS owns a complete,strict policy to ensure the use safety. Users mustfully understand each type of warning message. Warning messages includes:

• DCOutput Warning,
• Circuit Over-Temperature Warning
• Low Energy Warning
• Battery Over-Temperature Warning,
• Battery Low-Temperature Warning.

We designed a message box for each warning containing corresponding information.

1. Circuit Over-Temperature Warning
   The circuit board will generate heat during power conversion, when the temperature exceeds 80°C, the over-temperature protection will be triggered, and it will pop the message below.
   

2. Low Energy Warning
   When the voltage of the battery pack i lower than pre-defined threshold (for Lithium-ion cells combined in series of 4, the threshold voltage s 11.61) the system will pop out the message below.
   

3. Battery Over-Temperature Warning
   Battery isvery sensitve to environment temperature, extreme temperature willaffect the performance of bttery cells, decrease thebattery e and may even cause permanent damage. When the battery temperatureis bove 65°C, battery over-temperature  protection will be tiggered and the system will tum off outputs. In this situation, please turm off the system if applicable and let the prodiuct ool down.
   

4. Battery Low-Temperature Warning.
   When you use the product with EMOS i cold areas, the battery may get too cold (below -15°C) o provide sufficient power, EMOS willalso turn off the system output to avoid unstable output power. Please put the productin a warm environment to recover.
   

NoTE
SHARGEEK reserve the ights o change this manual based on actual products without nofifcations,please contact us via email (info@shargeek.com) if you have any questions.

Customer Service

18-month Lmited warranty
Lifetime technical Support
info@shargeek.com

NOTE *:
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. The warranty can either be Refund, Replacement or Repair based on different situations.
The warranty does not cover defects or damages caused by accident, improper care, improper use, negligence or excessive ware and tear.
SHARGEEK warrants that this product is free from defects in material and workmanship for a period of 18 months from the date of purchase.

https://www.instagram.com/shargeek/| https://www.facebook.com/qr/102735655342941
---|---

www.shargeek.com
Madein China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>