SAMSUNG S099MPP2IJ DOME GLASS Premium Film User Guide

SAMSUNG S099MPP2IJ DOME GLASS Premium Film

Please make sure to check the manual and installation video before using the product.

Products damaged or damaged by user usage, cannot be exchanged or refunded.

After checking the Quick guide, check the User guide.

Please check the model and components before using the product.

• Match your device model with the product in advance.
• Please check all the components listed and if there is any problem with the components, please contact us before the installation.

Cautions before Dome glass installation

• Surface scratch restoration is limited to minor scratches.
• It can be immediately restored when writing with a stylus pen gently.
• If pressing too hard, the glass could be restored in a few days but may remain small stains.
• No exchanges or refunds for the customer’s fault.

Components

Reference

• There may be differences in components depending on the model.
• To improve the product, the component’s appearance or specifications, etc. can be changed without prior notice.
• Some components can be purchased separately if necessary.

There are differences in components depending on the model, so please check the components of the product purchased before attaching it.

Installation-Display

STEP 1: Remove pre-installed film.
Use the alcohol wipe and the cleaning cloth to wipe down the screen. Remove any dust on your screen with the dust remover sticker. Attach the stopper. Close the device to the stopper.

STEP 2: Remove liner film.
Align the film starting with the top edges of the screen.

STEP 3:

• Tilt the protective film (1)180° and push with a squeegee to attach it.
• Tilt the protective film (2) at 180° and push with a squeegee to attach it.

STEP 4: Remove any bubbles with a squeeze
With a dust removal sticker remove the front protective film.

• Please do not press the bubbles or lines after the installation, it will be naturally disappeared.

Installation-Body

(There are differences in components depending on the model)

STEP 1:
Use the alcohol wipe and the cleaning cloth to wipe down the device. Remove any dust on your device with the dust remover sticker.

STEP 2: Remove liner film
Align the film starting with the top edges of the device.

STEP 3:

• Tilt the protective film (1)180° and push with a squeegee to attach it.
• Tilt the protective film (2) at 180° and push with a squeegee to attach it.

STEP 4: Remove any bubbles with a squeeze.
With a dust removal sticker remove the front protective film.

• Please do not press the bubbles or lines after the installation, it will be naturally disappeared.

There are differences in components depending on the model

STEP 1:
Use the alcohol wipe and the cleaning cloth to wipe down the device. Remove any dust on your device with the dust remover sticker.

STEP 2: Remove liner film
Align the film starting with the top edges of the device.

STEP 3:
Tilt the protective film (1)180° and push with a squeegee to attach it. Tilt the protective film (2)180° and push with a squeegee to attach it .

STEP 4: Remove any bubbles with a squeeze
With a dust removal sticker remove the front protective film.

• Please do not press the bubbles or lines after the installation, it will be naturally disappeared.

Installation-Body (There are differences in components depending on the model)

STEP 1:
Use the alcohol wipe and the cleaning cloth to wipe down the device. Remove any dust on your device with the dust remover sticker.

STEP 2: Remove liner film.
Align the film starting with the top edges of the device.

STEP 3:

• Tilt the protective film (1)180° and push with a squeegee to attach it.
• Tilt the protective film (2) at 180° and push with a squeegee to attach it.

STEP 4: Remove any bubbles with a squeeze
With a dust removal sticker remove the front protective film.

• Please do not press the bubbles or lines after the installation, it will be naturally disappeared.

Installation-Hinge

(There are differences in components depending on the model)

STEP 1:

• Use the alcohol wipe and the cleaning cloth to wipe down the device.
• Remove liner film[1]. Place it on the device and attach it in position.
• Tilt the protective film (2) at 180° and push with a squeegee to attach it.
• Tilt the protective film (3) at 180° and push with a squeegee to attach it.
• With a dust removal sticker remove the front protective film.

Precautions after installation

• Bubbles or lifting may occur by physical impacts such as drop impact, incompatible phone cases use, excessive strength while cleaning with alcohol wipes or etc.
• No refund or exchange for any type of user damage.

Global A/S

CONTACT US
feedback@whitestonedome.com

HOMEPAGE
www.whitestonedome.com. WARRANTY REQUEST. We always provide friendly and fast service to your questions.

WHITESTONE Ltd.
27, Baekseokgongdan7-ro, SeoBuk-gu, Cheonan-si, Chungcheongnam-do, Republic of Korea.

The unique Component Manufacturer, Whitestone (www.whitestonedome.com) for Mobile devices. Copyright ⓒ 2021 Whitestone Ltd. All rights reserved.

References

• Screen Protector Solution | Patented Liquid Dispersion Tempered Glass – Whitestonedome

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>