BEGA 34 162 Ceiling and Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 34 162 Ceiling and Wall Luminaire
Product Information
| Product Name | Luminaire |
|---|---|
| Model Number | 34 162 |
| IP Rating | IP 44 |
| Luminaire Efficiency | 67% |
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Instructions for use
Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass,
satin matt and metal housing, for all lighting tasks. They are ideal for
places where a soft and uniform lighting distribution is required. Luminaire
with a high protection class.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 2 × 40 W
- This product contains light sources of energy efficiency class E
- Supplied lamp 2 × BEGA LED lamp 13548 LED 7 W · 805 lm · 2700 K dimmable
- Supplied lamp 2 × BEGA LED lamp 13586 LED 7 W · 805 lm · 3000 Kdimmable
- Luminaire efficiency: 67%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product Description
- Luminaire made of aluminium alloy and stainless steel, finish Colour white
- Hand-blown opal glass, satin matt
- 2 mounting holes ø 4.8mm
- Distance apart 255mm
- 1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@
- Connection terminal 2.5@
- Earth conductor connection
- Lampholder E 27
- Safety class I
- Protection class IP 44
- Protected against granular foreign bodies ≥ 1 mm and splash water
- Impact strength IK04
- Protection against mechanical impacts < 0.5 joule
-
- Weight: 1.3 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Installation
- Lead the mains supply cable through the cable entry into the luminaire back housing.
- Fix luminaire back housing with enclosed or any other suitable fixing material onto the mounting surface.
- It is imperative to use the enclosed gaskets.
- Make earth conductor connection.
- Push silicone sleeves over the lines and make electrical connection.
- Insert lamp.
- Insert the opal glass into the lower spring clips, centralise and push it into the upper spring clips.
Relamping · Maintenance
- Disconnect the electrical installation.
- Pull glass out of the spring clips and remove from the luminaire back housing.
- Clean luminaire back housing and glass.
- Use only solvent-free cleansers.
- Change the lamp.
- Snap the glass into the lower spring clips, centralise and push it into the upper spring clips.
Dimension
Spares
- Spare glass 11 002 172 .0RG
- LED lamp 2700 K 13 548
- LED lamp 3000 K 13 586
- Lampholder 63 000 052
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden
info@bega.com
www.bega.com