BEGA 51052.6 Ceiling Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 51052.6 Ceiling Luminaire
Product Information
| Parameter | Value |
|---|---|
| Luminaire efficiency | 56.1% |
| Lamp type | Luminaire with screw base E27 |
| Maximum lamp output | 40 W |
| Energy efficiency class | E |
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product Usage Instructions
- Before installing onto the ceiling, insert the luminaire mounting plate into the luminaire housing.
- Pass the mains supply cable through the grommet into the luminaire mounting plate.
- Fix the mounting plate inside the luminaire housing with the provided or any other suitable fixing material onto the mounting surface.
- Dismantle the mains supply cable approximately 60 mm.
- Pull silicone sleeves over the wires and make earth and electrical connection to the terminals.
- Insert the lamp.
- To remove the synthetic cover, turn it anti-clockwise while simultaneously pushing it up against the luminaire fitting.
- To replace the lamp, disconnect from the main supply and unscrew the synthetic diffuser from the luminaire housing by turning it counter-clockwise.
- Change the lamp and screw in the synthetic diffuser by turning it clockwise. Replace a damaged synthetic diffuser if necessary.
For spare parts, the following items are available:
| Item | Code |
|---|---|
| LED lamp | 13 592 15 000 |
| Synthetic cover | 424 63 000 |
| Lampholder | 585 71 003 |
| Shield | 498 B13 |
Instructions for use
Application
Ceiling luminaire · indoor luminaire impact resistant synthetic diffuser and
metal housing for non-glare light deflected downwards.
Product Description
- Ceiling luminaire »STUDIO LINE«
- Aluminium luminaire housing, finish Colour velvet black inside hue matt copper
- Metal luminaire mounting plate, finish Colour velvet black
- Impact-resistant synthetic diffuser, white, with bayonet closure 2 mounting holes ø 5.5 mm
- Distance apart 180 mm 2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@ Connection terminal 2.5@
- Earth conductor connection
- Lampholder E 27
- Safety class I
- – Safety mark
- – Conformity mark
- Weight: 0.95 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Lamp
Luminaire with screw base E 27
Lamp output max. 40 W
This product contains light source of energy efficiency class E
Supplied lamp
BEGA LED lamp 13592
LED 12 W
1400 lm
3000 K
Luminaire efficiency: 56.1%
Detailed technical and lighting data for the lamps can be found in the data
sheets on our website.
Installation
Before installing onto the ceiling the luminaire mounting plate must be
inserted into the luminaire housing. Thereby pass the mains supply cable
through the grommet into luminaire mounting plate. Fix monting plate inside
the luminaire housing with enclosed or any other suitable fixing material on
to the mounting surface. Dismantle the mains supply cable approx. 60 mm. Pull
silicone sleeves over the wires and make earth and electrical connection to
the terminals. Insert lamp. In order to securely install the synthetic cover
in the fitting, the top opening of the synthetic cover must be inserted into
the luminaire housing at an angle. Make sure that at least one of the recesses
in the edge of the synthetic cover matches the position of one of the lugs on
the fitting – see drawing.
IMPORTANT:
Turn the synthetic cover upwards into the fitting as far as it will go. Now
secure the synthetic cover in the fitting by turning it clockwise. Only then
is the synthetic cover held securely in place and resistant to vibration. The
synthetic cover is removed by turning it anti-clockwise as far as it will go
while simultaneously pushing the synthetic cover up against the luminaire
fitting.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Relamping
Disconnect from main supply. Unscrew synthetic diffuser from luminaire housing
by turning it counter-clockwise. Change the lamp. Screw in synthetic diffuser
by turning it clockwise. A damaged synthetic diffuser must be replaced.
Spares
- LED lamp 3000K: 13 592
- Synthetic cover: 15 000 424
- Lampholder: 63 000 585
- Shield: 71 003 498 B13
BEGA Gantenbrink-Leuchten KG
Postfach 31 60
58689 Menden
info@bega.com
www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>