BEGA 22261 Wall Luminaire LED Light Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 22261 Wall Luminaire LED Light
Product Information
This product is a wall luminaire designed for orientating lighting tasks. It is made of aluminum casting with a frosted safety glass and silicone seal. The luminaire has a distance of 150 mm, a protection class of I, and an IP 64 protection rating, making it dustproof and protected against splashing water. It has an impact resistance of IK07, providing protection against mechanical damage. The luminaire has a power supply of LED 220-240 V x 0/50-60 Hz and weighs 0.7 kg. It also features Dark-Sky technology, which directs the light evenly onto the surface to be illuminated and emits less than 1% of the luminous flux into the upper half-space of the luminaire.
Product Usage Instructions
- The installation and commissioning of this luminaire should only be carried out by a qualified electrician in accordance with national safety regulations.
- Ensure that the power supply is switched off before installing or modifying the luminaire.
- Mount the wall luminaire securely using appropriate mounting hardware.
- Connect the luminaire to the power supply, making sure to follow the correct wiring instructions.
- Once the luminaire is properly installed, switch on the power supply.
- The luminaire can be used for orientating lighting tasks, providing illumination for specific areas or objects.
- To achieve optimal lighting, position the luminaire at the desired angle and distance from the surface or object to be illuminated.
- The luminaire can be operated in temperatures within the rated temperature range specified in the user manual.
- Avoid exposing the luminaire to extreme temperatures or environmental conditions that may affect its performance.
- Regularly clean the luminaire to remove dust and dirt buildup, ensuring optimal light output.
- If any issues or abnormalities occur during the usage of the luminaire, switch off the power supply and consult a qualified electrician or contact the manufacturer for assistance.
Instructions for use
Application
Wall luminaire for orientating lighting tasks.
DIMENSION
Product Description
- Luminaire made of aluminium alloy, aluminium and stainless steel
- BEGA Unidure® coating technology
- Matt safety glass
- Silicone gasket
- 2 mounting holes ø 4.3mm
- Distance apart 150mm
- 2 cable entries for through-wiring of connecting cable ø 7-10,5mm
- Connection terminal 2.5@
- Earth conductor connection
- LED power supply unit
- 220-240 V x 0/50-60 Hz
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components withoutswitching off the luminaire
- Safety class I
- Protection class IP 64
- Dust-tight and protection against splash water
- Impact strength IK07
- Protection against mechanical impacts < 2 joule
- Safety mark
- Conformity mark
- Weight: 0.7 kg
- This product contains light sources of energy efficiency class(es) D
Dark Sky
The light from this luminaire is directed evenly and highly efficiently onto
the surface to be illuminated and emits less than 1% of the luminaire luminous
flux into the upper halfspace of the luminaire.
Safety
- The installation and operation of this luminaireare subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
FEATURES
Lamp
- Module connected wattage 4 W
- Luminaire connected wattage 5.2 W
- Rated temperature ta=25 °C
- Ambient temperature ta max=55 °C
22 261K3
- Module designation 2x LED-0234/830
- Colour temperature 3000 K
- Colour rendering index CRI >80
- Module luminous flux 690 lm
- Luminaire luminous flux 437 lm
- Luminaire luminous efficiency 84 lm/W
22 261K4
- Module designation 2x LED-0234/840
- Colour temperature 4000 K
- Colour rendering index CRI >80
- Module luminous flux 700 lm
- Luminaire luminous flux 443 lm
- Luminaire luminous efficiency 85,2 lm/W
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Installation
- Luminaire in exterior application to be directed downward only.
- Undo screws and lift off luminaire top.
- LED are high-quality electronic components!
- Please avoid touching the light output opening of the LED directly during installation or relamping.
- Lead the mains supply cable through the cable entry into the luminaire back housing.
- Fix luminaire back housing with enclosed or any other suitable fixing material onto the mounting surface.
- It is absolutely essential to use the enclosed ring gaskets.
- Make earth conductor connection.
- Push silicone sleeves over the lines and make an electrical connection.
- Make earth conductor connection between the luminaire top and the luminaire base. Install luminaire top part.
- Make sure that gasket is in the correct position. Install the luminaire top, press on and manually tighten the screws evenly
Cleaning Maintenance
- Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
- Do not use high-pressure cleaners.
Replacing the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted.
- The module can be replaced by qualified persons using standard tools.
- Disconnect the system and open the luminaire.
- Please follow the installation instructions for the LED module.
- Inspect and, if necessary, replace the luminaire gaskets.
- The defective glass must be replaced.
- Close the luminaire.
Spares
- LED power supply unit DEV-0450/350
- LED module 3000 K LED-0234/830
- LED module 4000 K LED-0234/840
- Gasket 83 001 283
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden ·
info@bega.com
www.bega.com
References
Read User Manual Online (PDF format)
Loading......