BEGA 23259.3 LED Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 23259.3 LED Wall Luminaire
Product Information
Product Usage Instructions
DIMENSIONS
Instructions for use
Product Description
Safety
Overvoltage protection
Installation
Cleaning · Maintenance
Replacement of the LED module
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 23259.3 LED Wall Luminaire

BEGA-23259.3-LED-Wall-Luminaire-PRODUCT

Product Information

This is a luminaire that is subject to national safety regulations for installation and operation. It is recommended to have a qualified electrician carry out the installation and commissioning. The manufacturer does not accept liability for damage caused by improper use or installation. Any modifications made to the luminaire should be done by the responsible person, who will then be considered the manufacturer. The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website at www.bega.com. The luminaire has a lamp module connected wattage of 19.2 W and a luminaire connected wattage of 22.4 W. The rated temperature is between 25°C and 35°C, and the ambient temperature should also be within this range. The module designation is 3x LED-0425/930. It has a colour temperature of 3000 K and a colour rendering index (CRI) of over 90. The module has a luminous flux of 3165 lm, while the luminaire has a luminous flux of 2170 lm. The luminaire’s luminous efficiency is 96.9 lm/W.

Product Usage Instructions

For mounting and dismantling the luminaire, ensure there is a minimum distance of 450 mm between the removable cap and the wall.
During installation or relamping, avoid touching the light output opening of the LED directly as they are high-quality electronic components.

Spare Parts

Spare Glass: Part Number 11 002 949 .1R
LED Power Supply Unit: Part Number G DEV-0352/1000
LED Module 3000 K: Part Number LED-0425/930
Gasket: Part Number 83 001 179

DIMENSIONS

BEGA-23259.3-LED-Wall-Luminaire-FIG-1

Instructions for use

Application

Wall luminaire · indoor luminaire made of hand-blown opal glass and metal housing, for all lighting tasks in interior applications.
They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

Product Description

Luminaire made of Aluminium, finish Chrome
Hand-blown opal glass 2 elongated fixing holes
Width 6 mm · 450 mm spacing
Insulating housing with cable entry for mains supply cable up to ø 10,5 mm, max. 3 x 1,5@
Connection terminal 2.5@
Earth conductor connection
LED power supply unit 220-240 V x 0/50-60 Hz DC 198-280 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK02
Protection against mechanical impacts < 0.2 joule
– Safety mark
– Conformity mark
Weight: 2.8 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 19.2 W
Luminaire connected wattage 22.4 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 35 °C

23 259.3 K3

Module designation 3x LED-0425/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 3165 lm
Luminaire luminous flux 2170 lm
Luminaire luminous efficiency 96,9 lm / W

Installation

For mounting and dismantling please keep a minimum distance of 450 mm between the removable cap and the wall.
LEDs are high-quality electronic components!Please avoid touching the light output opening of the LED directly during installation or relamping.

Open luminaire:

Loosen knob, remove cap and glass.
Drill mounting holes into the mounting surface – spacing 450 mm.
For the mains supply connecting open the insulation housing – pull open – strip mains supply cable max. 15 mm and lead it into the insulation housing – see sketch.
Make earth conductor connection and electrical connection.
Connect both parts of the insulation housing until they audibly engage.
The outer coating of the cable has to be fully enclosed by the compression nipple.
Fix luminaire with enclosed or any other suitable fixing material onto the mounting surface. Remove bubble wrap underneath LED module. Place glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.
Defective glass must be replaced.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system.
Loosen lateral knob, remove cap and take out glass.
Please follow the installation instructions for the LED module.
Defective glass must be replaced.
Insert glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.