V-TAC 80133970 Smart LED Panel Instruction Manual
- June 9, 2024
- V TAC
Table of Contents
INNOVATIVE LED LIGHTING
WEEE Number: 80133970
INSTALLATION INSTRUCTION
SMART LED PANEL
INTRODUCTION & WARRANTY
*2 YEAR WARRANTY
Thank you for selecting and buying V-TAC SMART LED Lighting. V-TAC will
serve you the best. Please read these instructions carefully before starting
the installation and keep this manual handy for future reference. If you have
any other query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would
void the warranty. This product is warranted for manufacturing defects only.
Multi-Language Manual – QR CODE
** Please scan the QR code to access the manual in multiple languages.
https://www.vtacexports.com/media/pdf/english/VT-5140.pdf
SAFETY WARNING
- LED panels are limited to indoor use and are not advisable for use in humid environment
- LES panels cannot be installed on the surface of ordinary combustible materials. Increase in temperature is normal for panels.
- Do not exert external force or throw on the panels.
- LED Panels should be stored in cool/dry place. Always make sure the environment is clean before installing the panel.
- Do not discard the LED panel with regular trash. Panels are made with electronic components and should be properly disposed at designated locations with unified treatment like traditional electronic equipment.
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Install only by certified Electrician.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
INSTALLATION
- Make a hole ceiling.
- Wiring the DC cable of the panel to the power supply. And wiring the AC source cable to the powersupply
- Put up the panel onto the ceiling.
- Turn on the switch and test the fixture light on.
APP INSTALLATION
Step1: Disconnect the power supply and install the lamp.
Step2: Turn the power ON to test the lamp.
Step3: Scan the given QR code, or download “V-TAC Smart Light’ from the
App Store (iOS) or the Google Play Store (Android).
|
---|---
https://play.google.com/store/apps/details?id=com.vtac.smartlight|
https://itunes.apple.com/cn/app/v-tac-smart-
light/id1406697927?l=en&mt=8
Step4: Open the V-TAC Smart Light app and tap on register for creating a new account.
Step5:
A) Mobile Number: Select the country, then enter your mobile number. Once
done, tap ‘Next’.
B) E-Mail: Enter your email id and tap on ‘Next’.
Step6: Enter the verification code which will be sent to your mobile number/emai id, then assign a new password to your account and tap on “Confirm”.
Step7: Tap on ‘Add Device’ or the + sign. Make sure the lamp is switched on.
Step8: Choose ‘Lighting’ to start pairing the lamp to the app.
Step9: To pair the device with lamp make sure the light is blinks
rapidly.
Once the light blinks rapidly, the lamp is in pairing mode. If the bulb is not
blinking rapidly, you can do one of the following steps:
A. Switch the bulb on & off repeatedly for 3 times, with short intervals of
less than 2 seconds.
B. Tap the ‘How to make light blink rapidly’ link. (ref image below)
Network Modes:
- EZ Mode: Light flashes twice per second
- AP mode: Slow flash, once every 2 second Confirm if the light blinks rapidly, select the WiFi network, and enter the password.
Step10: Once you have successfully completed step 9, you will be
redirected to below page, where the App searches, registers and initializes
the device(lamp) (ref image below)
Step11: Once your device is successfully added, rename the device to your
preference.
Step12: After successfully pairing the lamp with the app, you can start controlling multiple features of the lamp through your mobile– on/off switch, changing the colour temperature,timing & schedules, dimming options, and more.
ALEXA SETTINGS
Step1: Install the Amazon Alexa app via the App Store(iOS) or the Play
Store (Android) and register. If you already have an existing account with
Amazon Alexa, please proceed to logging in.
Step2: Once you are on the Amazon Alexa home page, tap on the lower right
icon –– where the arrow is pointed–– to add a new device and skill.
Step3: Tap on setings and tap on “skills and games” as shown below.
Step4: Search for ‘V-TAC Smart Light’ on the “Skills & Games” page as
shown below.
Step5: Enable the Skill.
Step6: Enter your V-TAC Smart Light login ID and password and tap on
“Link Now”
Step7: Once you tap on Link Now, you will be redirected to a new page
requesting for authorization(Ref Image below).
Tap on “Authorize”
Step8: You will receive confirmation of the account being linked
successfully (Ref Image below)
Step8: Discover your smart device on Alexa. Once you have enabled the
skill
A) You can use voice command ”Alexa discover devices” to the Alexa device
which you have.
B) To add device manually on home page tap on and tap on Add device , select
the device which you are adding and tap on discover device.
Note: Discovering the device must be done every time the device’s name is changed on the app.
ALEXA Commands
Now, you can control your smart device using voice commands on Alexa. Below are a few commands you can use:
- Alexa, turn on/off bedroom light.
- Alexa, set bedroom light to 50 percent.
- Alexa, set bedroom light to warm white.
THINGS TO REMEMBER BEFORE STARTING INSTALLATION:
- V-TAC Smart Light App & Amazon Alexa App
- Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)
- Smart Device – Lamp
- Stable Wifi network
GOOGLE HOME SETTINGS
Step1:
a&b) Install the Google Home app via the App Store (iOS) or the Play Store
(Android) and register.
If you already have an existing account with Google Home, please proceed to
logging in.
c) Create a New Home/Choose from the existing home if any.
d) Power ON the Google Home device and connect it to the App.(Then Proceed to
step 2)
Step2: Once you are on the Google home page, tap on the Add “+” icon– to add a new device and skill. And then tap on Set up device as shown in below image.
Step3: Make sure the Smart Bulb is paired with V-TAC Smart Light app
before starting step 3. Tap on the arrow section as highlighted in the below
image.
Step4: Type “V-TAC Smart Light” on the search bar and tap on the icon of
“V-TAC Smart Light”
Step5: Sign In with your V-TAC Smart Light Login credentials to Link the
Smart Light device
Step6: Tap on Authorize in order to proceed to linking the device.
Step7
a. Account will now be linked, please stay on the page you will be redirected
in few seconds to select the device to add to your home.
b. Select the device and tap on Next as show in image b.
Step8: Select the Home where you would like toadd the Smart Light under.
(Or) you can create a New home in order to add the Smart Light to it.
Step9: You have succesfully added Smart Light device to your Google home
App.
Step10:
a. You can turn the Lamp On/OFF by taping on On/Off options as shown below.
(OR) You can tap on the Smart Lamp.
b. You will be redirected to page(as shown in image b) where you can control
the lights “Power and Dimmingfunctionality”.
Google Commands:
Now, you can control your smart device using voice commands on Google Home.
Below are a few commands you can use:
OK Google, turn on/off bedroom light.
OK Google, set bedroom light to 50 percent.
OK Google, set bedroom light to warm white.
THINGS TO REMEMBER BEFORE STARTING INSTALLATION:
- V-TAC Smart Light App & Google Home App
- Make sure you have Google Home Device
- Smart Device – Lamp
- Stable Wifi network
In case of any query/issue with the product please reach out to us
atsupport@vtacexports.com
V-TAC EUROPE LTD, Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
Documents / Resources
|
V-TAC 80133970 Smart LED
Panel
[pdf] Instruction Manual
80133970 Smart LED Panel, 80133970, Smart LED Panel, LED Panel, Panel
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>