DynaScan DK651DR5 65 Inch 4000 nits Dual Sided Ultra High Brightness Outdoor Kiosk User Manual

DynaScan DK651DR5 65 Inch 4000 nits Dual Sided Ultra High Brightness

Outdoor Kiosk

Specifications

• Model: DK651DR5

Energy Usage:

• Power On Mode: Typ. 1000W / Max. 1600W
• Standby Mode: < 50W
• Manufacturer: DynaScan Technology Corp.
• Manufacturer Address: 6F, No. 88 Wenmao Rd., Guishan Dist,
• Taoyuan City 333001, Taiwan

Product Usage Instructions
Safety Precautions

CAUTION: Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements.

WARNING: Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord as it might cause electric shock or fire. The power cord must comply with local safety regulations.

Important Safety Information

• Do not bend, twist, or damage the power cord.
• Do not damage or modify the prongs/pins and the ground contact on the power cord plug.
• Avoid placing the LCD on an unleveled surface or an unstable vehicle.
• Do not cover the vents and/or the heat sink.
• Do not install the LCD beside radiators or other heat sources.
• Avoid using the Signage in hot, humid, dusty, or fumy environments.
• Handle the LCD with care and save the packaging materials for transport later.
• Clean the LCD backside at least once a month for dust and other particles.

Operating Suggestions

Avoid displaying a stationary image for a long period of time to prevent image sticking.

Cleaning the Panel

• Use a soft, lint-free cloth to gently wipe dust off from the screen panel.
• Do not use any hard material to wipe the panel.
• Avoid poking the panel with your hand or any sharp object (such as a pen or a nail) or exerting pressure.

USER MANUAL

Please read this manual carefully before operating the product and keep it for future reference. The use of diagrams and illustrations in the manual are for reference only, the actual product may be different.

FOR MORE INFORMATION
For more information about DynaScan, visit our site at www.dynascan.com. Copyright © DynaScan Technology Inc. All rights reserved. All specifications and descriptions are subject to change without notice. Reproduction in whole or in part without permission is prohibited.

Material Contents Declaration

Recycling and Energy Information

DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products’ impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations.

Energy usage

Disposal
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge.

LICENSES
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Declaration of Conformity

FCC
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

• Manufacturer Name DynaScan Technology Corp.
• Manufacturer Address 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan

This device complies with Directive 2014/53/EU issued by the Commission of the European Community.

Safety Precautions

WARNING

• Please power off the LCD and the video source before plugging in the DVI, DP or HDMI cable.
• Please installed the display in well-ventilated place, do not install in a confined space.
• Suitable for mounting on concrete or other non-combustible surface only.
• If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer.
• Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning.
• Do not use extreme force or any sharp or pointed objects to touch the display.
• Do not drop or allow any object to fall to the display.
• Do not operate the display with wet hands to avoid electric shock.
• Do not discard this product with general household waste. Please be sure to comply with the local waste regulations.
• This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC).
• When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the  manufacturer’s warranty.
• In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen.
• Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure.
• Power cord shall be connected to a socket-outlet with earthing connection.

Important Safety Information

• Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements.
• Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources.
• Do not place heavy objects on the power cord. A damaged power cord might cause electric shock or fire.
• Do not bend, twist, or damage the power cord.
• The power cord must comply with the local safety regulations.
• Do not damage or modify the prongs/pins and the ground contact on the power cord plug.
• Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over and cause substantial damage.
• Do not cover the vents and/or the heat sink.
• Do not install the LCD beside radiators or other heat sources. The installation site should have sufficient ventilation so the heat generated by the LCD can be dissipated.
• Do not use the Signage in a hot, humid, dusty, or fumy environment.
• Handle the LCD with care. Save the packaging materials for transport later.
• Clean the LCD backside at least once a month for dust and other particles.

Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:

• Damaged power cord or power plug.
• If liquid or foreign object has entered the LCD.
• If the LCD has been exposed to rain or water.
• If the LCD has been dropped or the casing has become damaged.
• If any structural damage such as cracks or unnatural vibration is found.
• If the LCD cannot be operated following the steps outlined in this manual.
• If the LCD emits smoke or other odors, or generates strange noises.

Operating Suggestions

• Avoid displaying a stationary image for a long period of time in order to prevent image sticking.

Cleaning the Panel

• Use a soft, lint-free cloth to gently wipe the dust off from the screen panel.
• Do not use any hard material to wipe the panel.
• Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exertexcessive pressure on the panel to prevent any damage.
• Do not use any cleaning solutions on the panel as it might cause discoloration.

Cleaning the Casing
Unplug the power cord.

• Gently wipe the casing with a soft cloth.

Attention

• Do not use any of the following solutions to clean the casing as they may damage the paint andcause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution,glass cleaner, wax, polisher, or detergent.

Getting Started

Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products.

• DK651DR5 Professional LCD.
• Remote Control x 1 pc.
• Batteries (1.5V / AAA) x2 pcs.

Installing and Replacing Remote Control Batteries

1. Open the battery compartment cover.
2. Insert 2 new AAA batteries.
3. Close the battery compartment cover.

Warning

• Incorrect usage of batteries may cause leakage or explosion.
• Pay attention to the polarity when installing the batteries.
• Do not mix different types of batteries or new and used batteries. Doing so may shorten the battery life or cause leakage.
• Remove or replace the batteries when they are empty in order to prevent acid leaking in the battery compartment.
• Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so may hurt human skin.

Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control.

Installation

Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident.

Connecting to a Power Source
Using the power cable, connect it in the power terminal inside the front door of the display shown in the diagram below. Connect the power cable to a 200-240 volt, 50 / 60Hz 15A AC power outlet.

Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard.

Connecting an External Video Source
Turn OFF the power of both LCD , external video device and open the front side door. Using the DP cable (or HDMI cable), insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) which shown in the diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video source. Refer to your video device’s manual for additional information.

Input / Output Terminals

• A. RJ-45 1 (IN): RJ45 network input connection.
• B. RJ-45 2 (IN): RJ45 network input connection.
• C. RS-232 (IN): RS232C network input connection for remote control from PC.
• D. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable.
• E. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable.
• F. DP (IN): Connect the DP output of a PC or an AV device via a DP cable.
• G. USB 3.0 port1: Support for USB flash drive storage, mouse and keyboard.
• H. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302).
• I. Micro SD card: Support for up to 128GB, FAT32 format is supported.
• J. Thermal: Extension Connector for optional Extension thermal kit (ETK302).
• K. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device.
• L. AC (IN): Connect the supplied power cord to the wall outlet.
• M. Power Switch: Press to switch the main power on/off.
• N. HDMI 3 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable.

*USB 3.0 port: A standardized port to connect a variety of devices like mouse, keyboard, and flash drive. Support USB storage devices formatted with NTFS, FAT32 (32G) file system.

Operating Instructions
Powering On/Off the Display
To turn on/off the display, press the power switch on the side of the display as shown in the diagram below.

NOTE: The remote control only works when the power switch is ON.

Using the Remote Control

• When using the remote control, aim the remote at the IR receiver on the display. The IR receiver on the DK651DR5 model is at the front of the display with a receiving angle of 100 degrees. The IR receiver configurations of the model are shown in the figure below.
• The operating range of the remote control is 2.5 meters (8 feet).
• Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity.

IR Receiver

*Color and shape may vary by model.

Navigating the On Screen Display (OSD) Menu

Press the MENU button on the built-in keypad or remote control to show the OSD. Use the navigation arrows to select and adjust the menu items.
*The change of each setting can only enable when you press “LEFT” (refer to p.12) to back to the last menu layer.

1. Input Source
   
   

2. Picture
   

3. Brightness

4. Time
   
   

5.  Advanced
   
   
   

6. System Info
   

7.  Status
   

Some functions may not be available for all models.

Specifications

Design and specifications are subject to change without notice.

Input Mode

Pin Assignments

Troubleshooting

If you are still having trouble with your DynaScan DS² Professional LCD, contact your dealer or DynaScan directly for more assistance.

About DSM365

DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet.

How to Switch to DSM365

• Press the MENU button on either the rear panel control or remote control to show the OSD.
• Use the navigation arrows to select and adjust the Input Source. [Input Source → Main → DSM365]

www.dynascandisplay.com

Copyright © DynaScan Technology, Inc. All Rights Reserved.

DK651DR5 User Manual 26

References

• DynaScan – Indoor and Outdoor High Brightness LCDs

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>