Westfalia 94 54 55 Power Safe Light Instruction Manual

: June 12, 2024
: Westfalia

Table of Contents

Westfalia 94 54 55 Power Safe Light
Product Information
Product Usage Instructions
SAFETY NOTES
INSTRUCTION
Operation
Cleaning and Storing
Technical Data
EC DECLARATION OF CONFORMIT
CUSTOMER SERVICES
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Westfalia 94 54 55 Power Safe Light

Product Information

Product Name: LED-Sicherheitslicht Power Safe Light
Article Number: 94 54 55 Available
Languages: DE (German), GB (English), FR (French), NL (Dutch), IT (Italian)

Product Usage Instructions

Safety Instructions: – Do not look directly into the LED and do not direct the light beam of the lamp directly into the eyes of humans or animals. – Do not mix batteries with
rechargeable batteries. Only use batteries or rechargeable
batteries of the same type. –

Note: The product emits UV light.

Operation

Inserting/Replacing the Batteries:

Open the battery compartment by sliding the cover downwards and remove it from the lamp.
Insert three new LR03 batteries correctly into the battery compartment, following the polarity markings. Please make sure to follow the safety instructions and use the correct type of batteries when using the LED-Sicherheitslicht Power Safe Light

Dear Customer,
Operating instructions provide valuable information on how to use your new product. They will enable you to use all the functions and will help you to avoid misunderstandings and damage. Please take the time to read this manual carefully and keep it for future reference.

SAFETY NOTES

WARNING
Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damages or physical injuries:

Dispose of the packaging materials carefully; the plastic bags may become a deadly toy for children.
Keep the lamp out of reach of children. The lamp is not a toy.
Do not stare directly into the LEDs and do not direct the light beam towards people or animals.
Do not use devices which can strongly focus light for viewing the light beam.
If you do not plan to use the lamp for some time, remove the batteries.
Do not disassemble, burn, or short-circuit batteries and do not attempt to recharge non-rechargeable batteries.
Do not mix rechargeable batteries and non-rechargeable batteries and use only batteries of the same type.
Notice : UV radiation is emitted from this product.

INSTRUCTION

Inserting/Replacing the Batteries
The lamp is powered by three batteries of the type LR03 (AAA). The battery compartment is integrated into the bottom of the lamp. Replace the batteries when the light gets weaker.

Turn the base plate slightly counter clockwise and take it off the lamp.
Insert three new batteries of the type LR03 into the battery compartment. Pay attention to the proper polarity of the batteries. The polarity is printed inside the battery compartment. Reattach the base plate and lock it in place with the bayonet latch

Operation

You can set the switch on the back side of the lamp to the positions ON, OFF and AUTO.
In the ON Position the lamp is turned on continuously, in the OFF Position the lamp is turned off.
In the AUTO Position the lamp turns on in darkness (<8 lux) as soon as the motion sensor is triggered and remains on for approximately 30 seconds after the last motion has been detected. With the magnet at the bottom, you can stick the lamp to any magnetic surface.

Cleaning and Storing

Clean the lamp only with a dry or lightly moistened cloth. Do not use aggressive chemicals or abrasives for cleaning.
Do not immerse the lamp in liquids of any kind.
Store the lamp indoors in a dry place that is protected from dust, dirt and extreme temperatures.

Technical Data

EC DECLARATION OF CONFORMIT

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen, declare by our own responsibility that the product
Power Safe Light
Article No. 94 54 55
is according to the basic requirements, which are defined in the European Directives and their amendments.

2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)

2014/30/EU
Electromagnetic Compatibility (EMC)
EN IEC 55015:2019+A11, EN 61547:2009
The technical documentations are on file at the QA department of the Westfalia Werkzeugcompany.

Hagen, 12th of June, 2023

CUSTOMER SERVICES

Telefon : (0180) 5 30 31 32
Telefax : (0180) 5 30 31 30
Internet : www.westfalia.de

DISPOSAL

Dear Customer
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.