ULTIMEA Odine III 2.0 Channel Soundbar User Manual
- June 3, 2024
- ULTIMEA
Table of Contents
ULTIMEA Odine III 2.0 Channel Soundbar
Thank you for purchasing ULTIMEA Odine III. This guide will help you set up so you can enjoy the ultimate sound experience.
- Power Adapter
- Optical cable
- 3.5mm to RCA Audio Cable
- Wall Mounting Bolts
DIAGRAM (BUTTONS, PORTS & INDICATOR)
- Press 05 seconds to switch on, hold for 3 seconds to turn off
- Volume” – “:.Short press for decreasing volume “‘-1′” each, hold and long press for continuously decreasing volume to the lowest
- Volume” + “· Short press for increasing volume “+l each, hold ,md long press for continually increasing volume to the highe5t(32 levels)
- Press “m” button to switch between HDMI ARC, AUX, Bluetooth, Optical & USB mode
- Short press'””button, entering the pairing model: Long press “‘”‘ button to disconnect current connection, entering the pairing model again
- LED Indicator Bluetooth Input: bt. Optical Input: OPT: HDMI ARC Input: ARC, Aux Input: RUH ,USO Input: USb
- HDMI ARC Input
- 3.5mrr Audio Input
- Optical Input
Placement
Table placement. Place the sound bar on a solid surface.
Wall Mounting Installation
REMOTE CONTROL
Battery installation
Use remote control
The working range of remote +/-30″ in both Vertical and Horizontal Direction.
- Power: Press power for ls to switch on, hole for 5s to turn off
- Select Inputs Bluetooth,, Optical, HDMI ARC, AUX and USB.
- LOOP single/Loop all
- Five Different EQ Mode: MUSIC, MOV E. BASS+, NEWS, GAME
- MUS C: For music and TV sl-ows
- MOVIE: For movie end song with deep bass
- BASS+: For movie with super bass
- NEWS: For News, talk shows and variety shows
- GAMI::: I-or gaming
- 3D: Turn on/off 3D surround sound effect
- LED OFF please press and hold for 15s to turn/off the power indicator
USING YOUR SOUNDBAR
Turn On / Off
A. Connect to your TV
Use Remote Control or Button of Sound bar to change models
- Prior to usage, check if your TV has HDMI ARC, Optical and Aux Output
- Prior to using HDMI ARC connection, please be sure that the HDMI por. or your TV support ARC and the 1–DMI ARC cable version is not lower than HDMI.
- Turn on PCM settings of your TV when connected in Optical Mode in case it doesn’t have sound.
- 32 is the maximum volume of the sound bar.
B. Connect to other devices
Need to purchase one 3.5mm Audio Coble it your TV has 1 mile audio output the included RCA cable is 1 male to 2 male will not fit.
Bluetooth mode
Short press “bluetooth ” on the ’emote control or the sou1doilr, It will enter Bluetooth mode. bt will flash when pairing. bt will stay stable when connected successfully.
SPECIFICATION
- Input: DC 19V/2.5A
- Speaker Driver: 225″4 tweeter’2
- Net Weight: 2.LKg/ S.3 Lbs
- Size: 940’9B”68mm / 37’3.96’2 68 n
- Peak Power: 720W
- Range: l0m/ 33 ft
- Bluetooth Version: V5.0
Safety Instructions
- Avoid dropping
- Do net disassemble
- Avoid extreme temperatures
- Don’t use the device outdoors during thunder storms
- Use original or certified cables
- Don’t use any corrosive cleaner/ oil to clean
- The predicts should not be exposed to dripping or splashing water.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This mark shower on the product or its packaging. indicates that this product
should not be disposed with other household wales at the end of is working
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal , please separate this “rom other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources Household user should contact either the retailer where they
purchased this product. or their local government office, for details of where
and row they can take this item forever environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the r;urd1ase contact. This product should not be mixed with
other commercial wastes for disposal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>