IBESTWIN Rattan Ceiling Light Fixtures Installation Guide
- June 16, 2024
- IBESTWIN
Table of Contents
IBESTWIN Rattan Ceiling Light Fixtures Installation Guide
Installation steps
- Install the upper ceiling light bracket,lower bulb socket metal poles and lampshade together.
- Screw the“Hanging Board” to the ceiling cable box.
- Connect the power cord: Black Wire to Live Wire, White Wire to Null Wire.
- Screw the Sucker Plate to the hanging board.
- Install the light bulb, test the light!
- The end!
matters need attention
-
When installing, cleaning lamps and replacing bulbs, the power supply should be cut off
rated voltage 120V, 60Hz. -
avoid scratching the surface of lamps and lanterns and wires when installing, and wear gloves when installing.Please do not collide with the lamp tube to avoid injury (to avoid damage and injury)
-
Never install it on an uneven desktop. Keep flammable items such as paper and cloth away from the bulb (to avoid fire)
-
Lamps and lanterns shall not be close to acid and alkali containing corrosive chemical objects and gases, and shall not be cleaned with water.You can only try it with a clean soft cloth. 6Please do not touch the lamp tube during use or after turning off the lamp (to avoid burns)
-
Please do not use it in places with high humidity or high temperature.
-
Pay attention to handle with care when using it, and try to reduce the number of movements to prevent the bulb from being damaged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>