Mxmoonant Φ0.04-0.59 Small Wire Stripping Machine User Manual
- June 15, 2024
- Mxmoonant
Table of Contents
Mxmoonant Φ0.04-0.59 Small Wire Stripping Machine User Manual
Stripping Range: outer diameter 1-15mm (0.04in-0.5%in)
High Quality: High speed steel round blade of hidden type, safer and
tougher
DESCRIPTION
Stripping Range: outer diameter 1-15mm (0.04in-0.5%in) High speed steel round blade of hidden type, safer and tougher; wheels with deep and fine contact pattern to increase friction; the whole machine is made of finely polished aluminium alloy.
PACKAGE INCLUDES
-
Fixing bolts and screws, M4 M5 Mé Allen keys
-
Size: (14-16cm) 10cm7.5cm
-
It’s only the size of the palm and easier to carry with.
OPERATION METHODS
IMPORTANT ADJUSTMENT
The blade can be adjusted up and down by the upper screws.
Please do not cut too deep, just cut into the rubber layer, it protects the
blade and helps cut smoothly.
Part1: Make sure the anti-deflection baffle properly press the wire, so
that the wire will not go astray.
Part2: Adjustable wire inlet board makes the wire move within the limits.
Note: The wire will be stuck if the board is too high or too low. The board
should not be put higher than the blade.
Tips: When adjusting the tool by the steps above, it is recommended to strip a short length of the wire for adjustment, and then strip the rest. The first adjustment requires some patience, after that the machine is easy to use.
ABOUT US
- Mxmoonant is committed to providing useful domestic wire stripping tools for copper recycling. We have a series of stripping tools in wonderful design, and are frying harder 1o make more updates in this field.
- We promise both qualified products and excellent service, and provide you with comprehensively better shopping experience in Mxmoonant Amazon flagship store.
Email: [email protected]
